DINALEN® 65
DINALEN® 65 is low density polyethylene containing slip and anti-blocking additives. It is intended for thin blow film extrusion. Other processing techniques can be used in less extent.
DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C.
DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.
DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C.
DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 DINALEN® 65 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
Commercial: Active
文档
description
Technical Datasheet (English)
下载文档可用性
Europe
用途
Bags
加工方式
Blown Film
其他属性
Additive, Features, Agency Ratings, Appearance, Forms, Density, Melt Mass-Flow Rate (MFR), Tensile Stress at Yield, Tensile Stress at Break, Tensile Strain at Break, Coefficient of Friction, Film Thickness - Tested, Film Thickness - Recommended / Available, Shore Hardness, Vicat Softening Temperature, Melting Temperature, Gloss, Haze, Melt Temperature
加工
Find specific processing information for DINALEN® LDPE as well as general information for the Polyethylene, Low Density generic family. 注册 或 登录 了解更多信息。
