Udel® P-3703
Udel® P-3703 is a high-flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths. This grade has higher flow than Udel® P-1700 and a slightly greater tendency to stress crack in some aggressive environments.
Udel® polysulfone is a tough, rigid, high-strength thermoplastic that maintains its properties at temperatures from -101°C to 149°C (-150°F to 300°F). The heat deflection temperature at 1.8 MPa (264 psi) is 174°C (345°F). For most purposes, this resin is suitable for continuous use up to 149°C (300°F). The material is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel polysulfone is highly resistant to mineral acids, alkali and salt solutions. The resistance to detergents and hydrocarbon oils is good, but it will be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.
Electrical properties of Udel polysulfone are stable over a wide temperature range and after immersion in water or exposure to high humidity.
Udel® polysulfone is a tough, rigid, high-strength thermoplastic that maintains its properties at temperatures from -101°C to 149°C (-150°F to 300°F). The heat deflection temperature at 1.8 MPa (264 psi) is 174°C (345°F). For most purposes, this resin is suitable for continuous use up to 149°C (300°F). The material is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel polysulfone is highly resistant to mineral acids, alkali and salt solutions. The resistance to detergents and hydrocarbon oils is good, but it will be attacked by polar solvents such as ketones, chlorinated hydrocarbons and aromatic hydrocarbons.
Electrical properties of Udel polysulfone are stable over a wide temperature range and after immersion in water or exposure to high humidity.
- Natural: Udel® P-3703 NT 11
一般属性
使用 Prospector 建立免費帳戶時，可造訪 Udel® P-3703 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
Comercial: Activo
文档
description
Technical Datasheet
下载文档可用性
Asia-Pacífico, Europa, Latinoamérica, Norteamérica
用途
Aparatos
加工方式
Extrusión
多点数据
- Isothermal Stress vs. Strain (ISO 11403)
- Secant Modulus vs. Strain (ISO 11403)
- Viscosity vs. Shear Rate (ISO 11403)
其他属性
Características, Clasificaciones de Agencia, Conformidad con RoHS, Aspecto, Formas, Densidad / Gravedad específica, Velocidad de Fundido, Contracción de molde, flujo lineal, Absorción de agua @ 24 h., Módulo de tensión, Tensión en el Punto de Ruptura, Elongación en el Punto de Ruptura, Módulo de Flexión, Resistencia a la flexión, Resistencia al Impacto Izod con ranura, Resistencia al impacto, DTUL (264 psi) - no recocido, Coeficiente de dilatación térmica lineal (CLTE), flujo, Resisitividad específica de volumen, Resistencia dieléctrica, Constante dieléctrica, Factor de disipación, Ranking de Llama, Temperatura de secado, Tiempo de secado, Tamaño de inyección recomendado, Temp. de procesamiento (fusión), Temperatura del molde
加工
Find specific processing information for Udel® PSU as well as general information for the Polysulfone generic family. 注册 或 登录 了解更多信息。
