Polyethylen (PE): LLDPE
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
INEOS Wire & Cable BPD3642 | Europa |
LLDPE with enhanced properties for:
- Crosslinked low voltage cable insulation
- Base resin for high performance cable jacketing
1. LLDPE with enhanced properties for crosslinked low voltage cable insulation
Applications
BPD3642 is a LLDPE copolymer containing hexene-1 as comonomer which, when compounded with suitable additives, is designed for silane crosslinked LV insulation. BPD3642 can be used in a silane one step crosslinking process (Monosil® for example) and in a silane two step crosslinking process (Sioplas® process).
BPD3642 has been developed specifically to provide enhanced crosslinking and extrusion performances, thanks to proprietary process and catalyst and fit for purpose product design.
Physical properties of crosslinked compound as cable
BPD3642, when grafted in the laboratory with 0.8 % of a suitable silane/peroxide mixture and 0.05 % of a tin condensation catalyst, typically gives the following results on a 1.5 mm² cable after curing 2h in water at 80°C
2. LLDPE with enhanced properties for high performance cable jacketing
Applications
BPD3642 is a LLDPE which, when compounded with suitable additives, is designed for jacketing of cables, especially power cables.
BPD3642 combines an enhanced environmental stress cracking resistance to excellent mechanical properties.
|
INEOS Wire & Cable BPD3669 | Europa |
LLDPE with enhanced properties for crosslinked low voltage cable insulation
Applications
- BPD3669 is a LLDPE copolymer containing hexene-1 as comonomer which, when compounded with suitable additives, is designed for silane crosslinked LV insulation. BPD3669 can be used in a silane one step cross-linking process (Monosil® for example) and in a silane two step crosslinking process (Sioplas® process).
- BPD3669 has been developed specifically to provide enhanced crosslinking and extrusion performances, thanks to proprietary process and catalyst and fit for purpose product design.
LLDPE with enhanced properties for high performance cable jacketing
Applications
- BPD3669 is a LLDPE which, when compounded with suitable additives, is designed for jacketing of cables, especially power cables.
- BPD3669 combines an enhanced environmental stress cracking resistance to excellent mechanical properties.
|
INEOS Wire & Cable BPD3801 | Europa |
BPD3801 is a polyethylene copolymer containing hexene-1 as the comonomer produced with a metallocene catalyst. BPD3801 represents an interesting balance of properties for Wire & Cable applications.
When compounded with suitable additives, is designed for use in silane crosslinking processes (Monosil ® ). It has been developed for LV insulation or jacketing applications.
Benefits and Features
- Suitable Melt Index and Density for Wire & Cable applications
- High X-link efficiency
- Higher output and productivity
- High flexibility
- Very good Mechanical Properties and Stress Cracking Resistance
- Very good smoothness
|
InnoPlus LL7410A | Asien Pazifik |
InnoPlus LL7410A resin is a linear low density polyethylene with butene comonomers, without slip and antiblock. This grade offers the excellent machinability on conversion lines. Films extruded from InnoPlus LL7410A have high tensile strength, elongation, good toughness and outstanding puncture strength. It is available for tubular blown film processing. Besides, this grade can be used for blending with HDPE as well.
Typical Applications : InnoPlus LL7410A is recommended for producing the general purpose films, liners, heavy duty films, food packaging and agricultural films.
|
InnoPlus LL7410D | Asien Pazifik |
InnoPlus LL7410D resin is a linear low density polyethylene with butene comonomers, with high content of slip and antiblock. This grade offers the excellent machinability on conversion lines. Films extruded from InnoPlus LL7410D have high tensile strength, elongation, good toughness and outstanding puncture strength. It is available for tubular blown film processing.
Typical Applications : InnoPlus LL7410D is recommended for producing general purpose films, liners, food packaging, heavy duty and agricultural films.
|
InnoPlus LL7410D1 | Asien Pazifik |
InnoPlus LL7410D1 resin is a linear low density polyethylene with butene comonomers, with low content of slip and antiblock. This grade offers the excellent machinability on conversion lines. Films extruded from InnoPlus LL7410D1 have high tensile strength, elongation, good toughness and outstanding puncture strength. It is available for tubular blown film processing.
Typical Applications : InnoPlus LL7410D1 is recommended for producing the general purpose films, liners, food packaging, heavy duty and agricultural films.
|
InnoPlus LL8420A | Asien Pazifik |
InnoPlus LL8420A resin is a linear low density polyethylene which is designed for injection molding application. This grade has very narrow molecular weight distribution, offers an excellent impact strength, rigidity, environmental stress cracking resistance and processability.
Typical Applications : InnoPlus LL8420A is recommended for producing general purpose injection molding applications; lids, housewares, trash bins, masterbatch carrier.
|
InnoPlus LL9450U | Asien Pazifik |
LL9450U/UP are butene co-monomer based linear low density polyethylene which are designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide a balance of flow and stiffness, good impact strength, toughness and color stability.
Typical Applications : LL9450U/UP can be used to produce variety applications such as general molding, toys & play-ground equipment, outdoor storage containers and water tanks.
|
InnoPlus LL9450UP | Asien Pazifik |
LL9450U/UP are butene co-monomer based linear low density polyethylene which are designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide a balance of flow and stiffness, good impact strength, toughness and color stability.
LL9450UP is a powder form of LL9450U.
Typical Applications : LL9450U/UP can be used to produce variety applications such as general molding, toys & play-ground equipment, outdoor storage containers and water tanks.
|
InnoPlus LL9630A | Asien Pazifik |
InnoPlus LL9630A resin is a hexene co-polymer based linear low density polyethylene designed for rotational molding applications. This grade is non UV-stabilized pelletized rotational molding resin with high stiffness and an excellent balance of processability and environmental stress cracking resistance.
Typical Applications : InnoPlus LL9630A can be used to produce variety applications such as general molding, toys & playground equipments, storage containers, medium to large water tanks and chemical tanks.
|
InnoPlus LL9630U | Asien Pazifik |
InnoPlus LL9630U resin is a hexene co-polymer based linear low density polyethylene designed for rotational molding applications. This grade is UV8 resistance level pelletized rotational molding resin with high stiffness and an excellent balance of processability and environmental stress cracking resistance.
Typical Applications : InnoPlus LL9630U can be used to produce variety applications such as general molding, toys & playground equipments, storage containers, medium to large water tanks and chemical tanks.
|
InnoPlus LL9640U | Asien Pazifik |
InnoPlus LL9640U/LL9640UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent impact strength and good end use performance with optimizing the balance between stiffness and environmental stress cracking resistance.
Typical Applications : InnoPlus LL9640U/LL9640UP can be used to produce variety applications such as general molding, toys & playground equipment, outdoor storage containers, medium to large water tanks and chemical tanks.
|
InnoPlus LL9640UP | Asien Pazifik |
InnoPlus LL9640U/LL9640UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent impact strength and good end use performance with optimizing the balance between stiffness and environmental stress cracking resistance.
InnoPlus LL9640UP is a powder form of InnoPlus LL9640U.
Typical Applications : InnoPlus LL9640U/LL9640UP can be used to produce variety applications such as general molding, toys & playground equipment, outdoor storage containers, medium to large water tanks and chemical tanks.
|
InnoPlus LL9641U | Asien Pazifik |
InnoPlus LL9641U/LL9641UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent stiffness and a good balance between impact strength and environmental stress cracking resistance.
Typical Applications : InnoPlus LL9641U/LL9641UP can be used to produce variety applications such as general molding, toys & playground equipment, outdoor storage containers, medium to large water tanks and chemical tanks.
|
InnoPlus LL9641UP | Asien Pazifik |
InnoPlus LL9641U/LL9641UP are hexene co-polymer based linear low density polyethylene designed for rotational molding applications. These are UV8 resistance level rotational molding grades which provide an excellent stiffness and a good balance between impact strength and environmental stress cracking resistance.
InnoPlus LL9641UP is a powder form of InnoPlus LL9641U.
Typical Applications : InnoPlus LL9641U/LL9641UP can be used to produce variety applications such as general molding, toys & playground equipment, outdoor storage containers, medium to large water tanks and chemical tanks.
|
Jam 09X02 | Afrika und Mittlerer Osten |
09X02 HP-LLPDE film resin combines ease of processing with low gels and good film strength. Its excellent stretchability makes this grade particularly suited for stretch wrapping application, expecially as core layer in coextruded films.
Features
- Low gels
- Good film strength
- Excellent stretchability
Applications
- Cast film grade
- Stretch wrapping application
|
Jam 10Y02 | Afrika und Mittlerer Osten |
10Y02 is a hexene HP-LLDPE film resin that combines ease of processing with excellent physical properties. This resin is particularly suited for stretch wrapping applications, expecially as core layer in coextruded films, as it has shown very good film strength and stretchability.
Features
- Excellent physical properties
- Suited for stretch wrapping applications
- Very good film strength
- Stretchability
Applications
- Cast film grade
- Hexene Hp-LLDPE film resin
- Core layer in cextruded films
|
Jam 11X02 | Afrika und Mittlerer Osten |
11X02 is a HP-LLDPE blown film grade designed for easy processing applications which combines balanced film physical properties with good opticals.
Features
- General purpose
- Easy processing
- Good opticals
Applications
- Blown film grade
|
Jam 11YF6 | Afrika und Mittlerer Osten |
11YF6 is a quattro polymer HP-LLDPE grade suitable for lamination.
Features
- Quatter polymer HP-LLDPE
Applications
- Lamination, High clarity
|
Jam 12HF6 | Afrika und Mittlerer Osten |
12HF6 is a terpolymer HP-LLDPE grade suitable for shrink application.
Features
- Terpolymer HP-LLDPE
Applications
- Shrink
|
Jam 12X01 | Afrika und Mittlerer Osten |
12X01 is a HP-LLDPE blown film grade of excellent processability and good film strength combined with low gels.
Features
- Superbutene
- Excellent processability
- Good film strength
- Low gels
Application
- Blown film grade
|
Jam 12XF6 | Afrika und Mittlerer Osten |
12XF6 is a HP-LLDPE blown film grade for high film strength applications. HP-LLDPEs process easier than conventional LLDPEs and have low gels.
Features
- High performance
Applications
- Blown film grade
- High film strength applications
- Low gels
|
Jam 12YF6 | Afrika und Mittlerer Osten |
12YF6 is a hexene HP-LLDPE blown film grade for high performance applications. This resin processes easier than conventional LLDPEs and has low gels.
Features
- High performance applications
- Low gels
Applications
- Blown film grade
- Liner
|
Jam 14X01 | Afrika und Mittlerer Osten |
14X01 is a HP-LLDPE blown film grade of excellent processability which is particularly suited for film applications requiring a good balance between stiffness and strength.
Features
- High stiffness
- Excellent processability
- Good balance between stiffness and strength
Applications
- Blown film grade
|
Jam 14XF9 | Afrika und Mittlerer Osten |
14XF9 is a HP-LLDPE blown film grade of excellent processability, good film strength combined with very good optical properties ( transparencey and gloss, and low level of gels). The additivation package of 14XF9 is particularly suitable for lamination.
Features
- Excellent processability
- Good film strength combined
- Very good optical properties (transparency and gloss, and low level of gels)
Applications
- Film grade for lamination
|
Jam 14Y01 | Afrika und Mittlerer Osten |
14Y01 is a hexene HP-LLDPE blown film grade for applications requiring high film strength and good processability.
Features
- High film strength and good processability
Applications
- Blown film grade
- Thin film
|
Jam 14ZF8 | Afrika und Mittlerer Osten |
14ZF8 is a HP-LLDPE grade, suitable for blown film applications, targetting high mechanical properties, with an excellent processability. The 14ZF8 HP-LLDPE, alone or in blend with LDPE, is suitable for small pipe extrusion, especially for agricultural lateral-dripping pipes. The 14ZF8 is suitable for extrusion of blow molded soft containers.
Features
- Easy processability
- High mechanical properties
Applications
- Blown film
- Small pipe extrusion
- Agricultrual lateral-dripping pines
|
Jam 15YF8 | Afrika und Mittlerer Osten |
15YF8 is a hexane HP-LLDPE blown film grade for high performance applications. This resin processes easier than conventional LLDPEs and has low gels.
Features
- High performance applications
- Heavy duty
Applications
- Blown film grade
|
Jam 16501 | Afrika und Mittlerer Osten |
16501A8 is a LLDPE blown film grade which combines ease of processing with low gels and good film strength.
Features
- Ease of processing with low gels
- Good film strength
Applications
- Blown film grade
- Liner
|
Jam 16502 | Afrika und Mittlerer Osten |
The ease of processing and the low gels make 16502 well suited for a general purpose use in cast film applications, including stretch wrapping.
Features
- Ease of processing
- Low gels
Applications
- Cast film
- General purpose
- Stretch wrapping
|
Jam 16503 | Afrika und Mittlerer Osten |
The ease of processing and the low gels make 16503 well suited for production of general purpose monolayer or multilayer cast stretch film.
Features
- ease of processing
- low gels
- general purpose monolayer or multilayer cast stretch film.
Applications
- Cast stretch film grade
|
Jam 18YF3 | Afrika und Mittlerer Osten |
- Film properties are obtained on 25 (micron) film made on 25mm blown extruder according to method MA 17313, unless specified.
- The density corresponds to the basic grade product, after addivtivation the density is increased depending on the type of additivation.
- On High Performance (HP) types, density can not be corrolated to stiffness in the same way of conventional LLDPE, due to the different polymer structure.
Applications
- Shrink film
- High performance
|
Jam 18YF5 | Afrika und Mittlerer Osten |
- 18YF5 is a quattropolymer HP-LLDPE grade suitable for shrink application.
Features
- High stiffness
- Quatter polymer HP-LLDPE
Applications
- Shrink
|
Jam 20505 | Afrika und Mittlerer Osten |
20505 is the general purpose injection molding grade.
Features
- Injection molding
Applications
- General purpose
|
Jam 20X02 | Afrika und Mittlerer Osten |
XX006 is a HP-LLDPE for cast film application which combines ease of processing with good optics and it is particularly designed for bakery applications.
Features
- Combines ease of processing with good optics
Applications
- Cast film grade
- Bread bags
|
Jam 22501AA | Afrika und Mittlerer Osten |
22501 is a LLDPE blown film grade designed for applications requiring good optical properties even at low extrusion temperature. This resin combines ease of processing with low gels and it is well suited for blending with LDPE and for general purpose applications.
Features
- High stiffness
- Good optical properties
- Low extrusion temperature
- Ease of processing
- Low gels
- Suited for blending with LDPE
- General purpose applications
Applications
- Blown film grade
|
Jam 22501KJ | Afrika und Mittlerer Osten |
22501 is a LLDPE blown film grade designed for applications requiring good optical properties even at low extrusion temperature. this resin combines ease of processing with low gels and it is well suited for blending with LDPE and for general purpose applications.
Features
- High stiffness
- Good optical properties
- Low extrusion temperature
- Ease of processing
- Low gels
- Suited for blending with LDPE
- General purpose applications
Applications
- Blown film grade
|
Jam 22502AA | Afrika und Mittlerer Osten |
22302 is a LLDPE blown film grade designed for applications requiring ease of processing and good optical properties even at low extrusion temperature. This resin is well suited for blending with LDPE and for general pupose uses, including agricultural applications.
Features
- General purpose
- Ease of processing
- Good optical properties
- Low extrusion temperature
- Suited for blending with LDPE
- Agricultural applications
Applications
- Blown film grade
|
Jam 22502KJ | Afrika und Mittlerer Osten |
22302 is a LLDPE blown film grade designed for applications requiring ease of processing and good optical properties even at low extrusion temperature. This resin is well suited for blending with LDPE and for general pupose uses, including agricultural applications.
Features
- General purpose
- Ease of processing
- Good optical properties
- Low extrusion temperature
- Suited for blending with LDPE
- Agricultural applications
Applications
- Blown film grade
|
Jam 235F7 | Afrika und Mittlerer Osten |
235F7 is a LLDPE blown film grade designed for general purpose film. this resin is particularly suited for blending with LDPE, giving better strength and downgauging possibility.
Features
- General purpose film
- Suited for blending with LDPE
- Better strength
Applications
- Blown film grade
|