Polyethylen (PE): LLDPE
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
MARPOL® LL8F 801 | Afrika und Mittlerer Osten | |
MARPOL® LL8F 801-SB | Afrika und Mittlerer Osten |
Recommended Applications: General purpose film extrusion and lamination, food packaging, freezer film, lamination and sealant film. Also good for heavy duty sacks and high strength packaging.
|
MARPOL® LL8F 802 | Afrika und Mittlerer Osten |
MARPOL® LL8F 802 is an ethylene and octene copolymer resin designed for blown film applications and for blends with LDPE. It offers excellent seal performance during high extrusion output rates. It has an excellent balance of optical and mechanical properties.
Recommended Applications: Blown film applications and blending
FDA Status: Complies with U.S FDA FCN 424 and EU No. 10/2011
|
MARPOL® LL8F 805 | Afrika und Mittlerer Osten |
Product Features:
Good stiffness, easy processability, moderate toughness, moderate strength and excellent seal properties
Recommended Applications:
Heavy duty shipping sacks, industrial packaging, industrial liners, construction film and automatic packaging film
|
Microthene® MP564189 | Nordamerika |
MICROTHENE MP564189 exhibits good stiffness and low temperature toughness. Typical applications include trash cans, industrial containers, housewares and toys. MP564189 is 16 mesh powder and is also available in pellet form Petrothene GA564189.
MP564189 meets the requirements of the Food and Drug Administration 21 CFR 177.1520. This regulation allows the use of this olefin polymer in" ...articles or components or articles intended for use in contact with food." Specific limitations or conditions of use may apply.
|
Microthene® MP574189 | Nordamerika |
Microthene MP574189 exhibits excellent flow and impact with good stiffness. Typical applications include lids, closures, containers, housewares and medical items. MP574189 is 16 mesh powder and is also available in pellet form Petrothene GA574189.
MP574189 meets the requirements of the Food and Drug Administration regulation, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply.
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.
|
Microthene® MP625962 | Nordamerika |
Microthene MP625962 is a hexene LLDPE rotational molding powder with excellent flow properties selected by customers to produce a variety of objects such as toys, playground equipment, drums and agricultural and chemical storage containers. MP625962 exhibits high ESCR, low temperature impact strength and warp resistance. MP625962 is a UV-stabilized, 35-mesh powder and is also available in pellet form as Petrothene GA625962.
|
Microthene® MP635662 | Asien Pazifik |
MICROTHENE MP 635-662 is a high flow hexene LLDPE powder for the rotational molding of large hollow objects, including toys, playground equipment, drums and agricultural and chemical storage containers.
MP 635-662 exhibits excellent ESCR, low temperature impact strength and warp resistance. MP 635-662 is a UV-stabilized, 35-mesh powder and is also available in pellet form as PETROTHENE® GA 635-662.
|
Microthene® MP635962 | Nordamerika |
Microthene MP635962 is a high flow hexene LLDPE powder selected by customers for the rotational molding of large hollow objects, including toys, playground equipment, drums and agricultural and chemical storage containers. MP635962 exhibits high ESCR, low temperature impact strength and warp resistance. MP635962 is a UV-stabilized, 35-mesh powder and is also available in pellet form as Petrothene GA635962.
|
MODIC™ M512E | Asien Pazifik |
Base Resin: LLDPE
Type: Performance Tie-Resin
Co-extruded resin: PE / EVOH, PE/ Polyamide, PES / EVOH and those combinations.
Application: Blown film, Cast film
|
MODIC™ M603E | Asien Pazifik |
Base Resin: LLDPE
Type: High Performance Tie-Resin
Co-extruded resin: PE / EVOH, PE/ Polyamide
Application: Blown film, Cast film, Sheet
|
MODIC™ M704E | Asien Pazifik |
Base Resin: LLDPE
Type: High Performance Tie-Resin
Co-extruded resin: PE / EVOH, PE/ Polyamide
Application: Blown film, Cast film, Sheet, Piping
|
MODIC™ M804E | Asien Pazifik |
Base Resin: LLDPE
Type: High Performance Tie-Resin
Co-extruded resin: PE / EVOH, PE/ Polyamide
Application: Blown film, Cast film, Sheet, Piping
|
Moharamplast LLDPE MP50035U | Afrika und Mittlerer Osten |
A linear low density polyethylene (LLDPE) powder compound designed to provide excellent stress crack resistance, better mechanical properties with high rigidity, toughness, gloss and very low warpage. Antioxidants and UV stabilizers are added to ensure protection against degradation by heat or UV irradiation.
Safety
LLDPE MP50035U is classified as no-dangerous material.
We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet.
Typical Applications
LLDPE MP50035U is an alternative for use in rotational molding applications as large industrial and agricultural tanks, trash containers, chemical shipping drums and also suitable for injection molding applications such as screw closures, caps and housewares.
|
MTEGRITY™ LLDPE LL104AA | Nordamerika |
Linear Low Density Polyethylene
- No slip or antiblock
- Commercial and Industrial packaging
- Liners
|
MTEGRITY™ LLDPE LL104AH | Nordamerika |
Linear Low Density Polyethylene
- No Slip
- High Antiblock
- Commercial and Industrial packaging
- Liners
|
MTEGRITY™ LLDPE LL104AM | Nordamerika |
Linear Low Density Polyethylene
- Medium Antiblock
- Liners
- General Purpose Packaging
|
MTEGRITY™ LLDPE LL104HH | Nordamerika |
Linear Low Density Polyethylene
- High slip and antiblock levels
- Commercial and Industrial packaging
- Liners
|
MTEGRITY™ LLDPE LL104MM | Nordamerika |
Linear Low Density Polyethylene
- Medium Slip & Antiblock
- Commercial & Industrial Packaging
- Food & Consumer Packaging
|
MTEGRITY™ LLDPE LL106AA | Nordamerika |
Linear Low Density Polyethylene
- High Strength
- No Slip Or Antiblock
- Films
- Packaging
|
MTEGRITY™ LLDPE LL106AM | Nordamerika |
Linear Low Density Polyethylene
- High Strength
- Good Drawdown
- Frozen Foods
- Skin Packaging
|
MTEGRITY™ LLDPE LL106HH | Nordamerika | |
MTEGRITY™ LLDPE LL106MM | Nordamerika | |
MTEGRITY™ LLDPE LL107AA | Nordamerika |
Linear Low Density Polyethylene
- Super Hexene
- Barefoot
- Liners
- Industrial Packaging
|
MTEGRITY™ LLDPE LL107AH | Nordamerika |
Linear Low Density Polyethylene
- Super Hexene
- No Slip
- High Antiblock
- Liners
- Industrial Packaging
|
MTEGRITY™ LLDPE LL204AA | Nordamerika |
Linear Low Density Polyethylene
- Toughness and Strength
- Process Stabilizer
- Cast Films
- Blending
|
MTEGRITY™ LLDPE LL204HH | Nordamerika |
Linear Low Density Polyethylene
- High Slip and Antiblock additive levels
- Processing Aid
|
MTEGRITY™ LLDPE LL204MM | Nordamerika |
Linear Low Density Polyethylene
- Excellent Sealing Properties
- Food Packaging
- Stretch Wrap
|
MTEGRITY™ LLDPE LL206AA | Nordamerika |
Linear Low Density Polyethylene
- Toughness and Strength
- Process Stabilizer
- Stretch Film (core layer)
|
MTEGRITY™ LLDPE LL220AA | Nordamerika | |
MTEGRITY™ LLDPE LL240 | Nordamerika | |
MTEGRITY™ LLDPE LL500 | Nordamerika |
Linear Low Density Polyethylene
- Medium Flow
- Easy Processability
- Blending
- Concentrates
|
MTEGRITY™ LLDPE LL500G | Nordamerika | |
MTEGRITY™ LLDPE LL800 | Nordamerika | |
MTEGRITY™ LLDPE LL800G | Nordamerika |
Linear Low Density Polyethylene Powder
- Masterbatch Resin
- No slip, antiblock or processing aid
- Thermal Stabilizer additive
|
MTEGRITY™ LLDPE LR230U / UG | Nordamerika |
Rotational Molding Linear Low Density Polyethylene
- Excellent Low Temp Impact
- Good Stiffness
- Antioxidant, UV stabilizer
- Septic Tanks
- Agricultural Storage Tanks
|
MTEGRITY™ LLDPE LR250U / UG | Nordamerika |
Rotational Molding Linear Low Density Polyethylene
- Excellent Low Temp Impact
- Excellent ESCR
- Antioxidant, UV stabilizer
- Toys
- Agricultural Storage Tanks
- Marine Parts
|
MTEGRITY™ LLDPE LR370U / UG | Nordamerika |
Rotational Molding Linear Low Density Polyethylene
- Good Impact Properties
- Excellent Processability
- Antioxidant, UV stabilizer
- Toys
- Home & Garden Items
- Mailboxes
|
MWR LLDPE 6410 | Nordamerika |
Linear Low Density Polyethylene Extrusion Grade
|
NEFTEKHIM PE 4020R (20405) | Europa |
Product obtained by gas-phase copolymerization of ethylene and butene-1 in presence of complex metalorganic catalysts.
Stabilization recipe: antacid, antioxydant, heat stabilizer, dispersant
Application: general purpose, injection molding of buckets and containers
|