LNP LUBRICOMP FL003 compound is based on Polyethylene (PE) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP FL004 compound is based on Polyethylene (PE) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP FL004 compound is based on Polyethylene (PE) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP FL004 compound is based on Polyethylene (PE) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP FP003 compound is based on Polyethylene (PE) resin, containing 15% PTFE/silicone. Added features of this grade include: Internally Lubricated, Wear Resistant.

LNP LUBRICOMP FX04491H compound is based on Polyethylene (PE) resin containing proprietary lubricant. Added features of this grade include: Wear Resistant, Healthcare

LNP LUBRICOMP PDXF89080 compound is based on Polyethylene (PE) resin containing proprietary lubricant. Added features of this grade include: Wear Resistant.

LNP STAT-KON FD000 compound is based on Polyethylene (PE) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX09905 compound is based on Polyethylene (PE) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX91304 compound is based on Polyethylene (PE) resin containing carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX98500C compound is based on Polyethylene (PE) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX98501 compound is based on Polyethylene (PE) resin containing conductive carbon powder and glass fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX98501 compound is based on Polyethylene (PE) resin containing conductive carbon powder and glass fiber. Added features of this grade include: Electrically Conductive.

LNP THERMOCOMP FF004 is a compound based on Polyethylene (PE) resin containing 20% Glass Fiber.

LNP THERMOCOMP FX10009 compound is based on Polyethylene (PE) resin containing proprietary fillers. Added features of this grade include: Improved Dielectric Properties.

B1054 is a High Density Polyethylene specially developed for blow molding and jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

B1054M is a High Density Polyethylene specially developed for blow molding and jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness and ESCR with good impact resistance.

B4660 grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660: Suitable for Dairy products and Juice Packaging

B4660AB grade are medium molecular weight High Density Polyethylene homopolymer for blow molding Applications. They are primarily Designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength. B4660AB: Suitable for Water packaging

HDPE B5206 is high density polyethylene specially developed for large blow molding / Jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

SABIC® HDPE B5210 is a material with a specific molecular weight distribution, typically used for blow molding of light weight UN certified cans from 2 to 20 liters. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE B5308 is a multi-modal HMW HDPE grade specifically designed for blow molding floaters for floating photovoltaic (PV) panel systems. It has outstanding ESCR (environmental stress crack resistance), excellent mechanical properties, very good toughness and stiffness balance, long lifetime and easy blow molding processability. B5308 is also suitable for large size containers such as water tanks and transportation containers when high ESCR and toughness/stiffness balance is required.

B5403 is a High Density Polyethylene specially developed for blow molding / Jerry cans and drums. The material offers and excellent combination of stiffness and ESCR and a high Impact resistance. This grade can be used in food contact applications.

HDPE B5403M is a High Density Polyethylene specially developed for blow molding / Jerry cans and drums.The material offers an excellent combination of stiffness and ESCR and a high Impact resistance.

SABIC® HDPE B5411 is a material with a semi-high molecular mass, additionally thermal stabilized and typically used for blow molding and sheet extrusion. This grade is combining stiffness, toughness with an high ESCR and is typically used for large bottles, cans, technical parts and toys. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE B5421 is typically used for blow molding consumer packaging up to 5 l, combining a good stiffness with an high ESCR. This grade is typically used for packaging detergents, cleaners, shampoos and cosmetics at a high ESCR demand. This product is not intended for and must not be used in any pharmaceutical/medical applications.

HDPE B5428 is a medium molecular weight high density polyethylene resin used for blow molding. Blow molded parts made from this resin exhibit high stiffness, good impact strength and good Environmental Stress-Cracking Resistance (ESCR).

B5429 grade is medium molecular weight High Density Polyethylene copolymer. They are primarily intended for blow molding articles of small sizes. B5429 series grades offer excellent combination of toughness, stress cracking resistance, load bearing strength with easy processability. The grade available with antistatic additive is B5429A.

HDPE B5822 is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength.

HDPE B5822M is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength. It exhibits a very good combination of high stiffness and high stress cracking resistance. HDPE B5822M demonstrates good organoleptic properties and has a broad molecular weight distribution.

SABIC® HDPE B5823 is typically used for blow moulding of consumer packaging up to 5 l, combining high stiffness and a good ESCR level. This grade is typically used for packaging the majority of household and industrial chemicals, such as detergents, cleaners, shampoos and cosmetics, as well as food packaging. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® HDPE B6246LS is typically used in food and beverage packaging, offering good purity and organoleptics as well as recycle ability. It combines a high rigidity with very good processing performance, which offers potential for system cost reduction. The grade is typically used for the blow molding of mono as well as multi layer bottles in several food markets, like fresh, pasteurized and ultra heat treated milk, sauces, orange juice, functional drinks, probiotics and other "daily shot" drinks. The material properties offer the possibility to reduce weight at good top load strength. This slip agent free grade is also typically used for the injection molding of caps & closures for carbonated soft drinks and sparkling water as well as high environmental stress crack resistant applications, like UN-pails and UN-caps & closures. This product is not intended for and must not be used in any pharmaceutical/medical applications.

BM1052J is a high molecular weight TNPP free High Density Polyethylene copolymer grade with broad molecular weight distribution. It has excellent process ability and exhibits very high impact strength, stiffness and superior environmental stress crack resistance.

BM6246LS is a medium molecular weight High Density Polyethylene homopolymer grade for blow molding applications. It is primarily designed for imparting high rigidity, toughness and good processability. These unique properties offer the possibility to reduce weight at very good top load strength.

C0549 is a black High Density Polyethylene designed for Jacketing compound. This grade has excellent processability and physical properties as well as high Environmental stress crack resistance. 2.5% Carbon Black is added to ensure an outstanding weather and UV resistance.

CC027C is a multimodal, high density polyethylene. It offers very good process ability in combination with stiffness, impact resistance, excellent ESCR and organoleptic properties. This grade is intended for injection and compression molding closures for sparkling water and carbonated soft drinks, particularly for latest designs of lightweight. CC027C does not contain slip agent.

SABIC® HDPE CC027SL is a multimodal, high density polyethylene. It offers very good process ability in combination with stiffness, impact resistance, excellent ESCR and organoleptic properties with controlled torque level. This grade is intended for injection and compression molding caps for sparkling water and carbonated soft drinks, particularly for latest designs of lightweight. SABIC® HDPE CC027SL contains slip agent.

SABIC® HDPE CC2056 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC® HDPE CC2056 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC HDPE CC254 is state of the art resin produced by ACP technology. It is easy to process on injection molding and compression molding machines. The grade offers good balance of stiffness, toughness and environmental stress cracking resistance properties.

SABIC® HDPE CC3054 is a high density polyethylene copolymer injection molding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, good gloss and fast molding cycles. SABIC® HDPE CC3054 is typically used for caps and closures applications and thin wall articles. This product is not intended for and must not be used in any pharmaceutical/medical applications.