Lupolen 4261 AG UV is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance, delivered in pellet form. Main applications* are jerry cans, heating oil tanks and IBC. *Appropriateness of resin for use in specific applications, under outdoor or indoor storage conditions or for specific container contents should be carried out by the appropriate parties (converter, end user) on the molded item with reference to appropriate local, national and international guidelines.

Lupolen 4261 AG is a high molecular weight high density polyethylene (HDPE). Typical customer applications include automotive fuel tank applications. It is supplied in pellets and is stabilized with antioxidants for the extrusion process. The product features an outstanding Enviromental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical processes include blow moulding and thermoforming. Lupolen 4261 AG is not intended for use in medical and pharmaceutical applications. The product can not be used for food contact applications.

Lupolen 4261A Q135 is a high molecular weight high density polyethylene. Typical customer applications include automotive fuel tank applications. It is supplied in powder form and is stabilized with antioxidants for the extrusion process. The product features an outstanding Environmental Stress Cracking Resistance (ESCR), good chemical resistance in combination with an excellent low temperature impact resistance. Typical processes include blow molding and thermoforming. Lupolen 4261A Q135 is not intended for use in medical and pharmaceutical applications.

Lupolen 4261A Q149 is a high density polyethylene with an outstanding ESCR, good chemical resistance and high impact resistance. It is delivered in powder form without any additives. Typical customer applications include IBC, drums and jerry cans for the packaging of dangerous goods. Lupolen 4261A Q149 is not intended for use in medical and pharmaceutical applications.

Lupolen 4261AG Q469 is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance. It is delivered in pellet form and contains antioxidants. Typical customer applications include jerry cans and Intermediate Bulk Containers (IBC) for the packaging of dangerous goods. Lupolen 4261AG Q469 is not intended for use in medical and pharmaceutical applications.

Lupolen 4261 AG Q 474 is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance. It is delivered in pellet form and contains antioxidants. Typical customer applications include injection molded IBC outlet valves and accessories. Lupolen 4261 AG Q 474 is not intended for use in medical and pharmaceutical applications.

Lupolen 4261AG UV60005 is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance. It is delivered in pellet form and contains antioxidants and a UV-stabiliser. Typical customer applications include Intermediate Bulk Containers (IBC) for the packaging of dangerous goods and heating oil tanks. Lupolen 4261AG UV60005 is not intended for use in medical and pharmaceutical applications.

Lupolen 4552D black is a UV and thermal stabilised high-density polyethylene with a multi-modal molecular weight distribution designed for extrusion. Lupolen 4552D black is produced with the advanced Hostalen technology which provides the material with excellent mechanical and physical properties. The excellent dispersion of the fine particle sized carbon black ensures the material has excellent weathering resistance. Lupolen 4552D black fulfils the requirements of DIN 30670, NFA 49710, CAN, CSA-Z245.21-M98 and prEN 10285 when used in combination with the maleic-anhydrided grafted adhesives Lucalen G3710E P and a compatible fusion-bonded epoxy powder. Lupolen 4552D black is recommended as the topcoat layer in 3LPE pipe coating applications and is suitable for severe laying conditions even at elevated temperatures. Lupolen 4552D black can be used up to 85°C service temperature of the pipeline when used in combination with the maleic-anhydride grafted adhesives Lucalen G3710E or Lucalen G3710E P and a compatible fusion-bonded epoxy powder. This grade is available in black, in pellet form.

Lupolen 5021DX is a high density polyethylene resin used in a wide range of processing methods. Typical customer applications include small blow molding of engineering parts, toys, packaging for consumer goods and for surfactants. It exhibits good chemical resistance and good ESCR as well as good flowability and organoleptic properties. Lupolen 5021DX is delivered in pellet form, contains antioxidants and has a broad molecular weight distribution. Lupolen 5021DX is not intended for use in medical and pharmaceutical applications.

Lupolen 5031 L Q 449 K is a high density polyethylene (HDPE) base material for extrusion of silane crosslinked pipes (PE-Xb). It is not intended for medical and pharmaceutical applications.

Lupolen 5121 A is a high molecular weight high density polyethylene (HDPE) resin used in blow molding applications. Typical customer applications include packagings for dangerous goods and consumer goods. It exhibits high rigidity and ESCR as well as good flowability and organoleptic properties. Lupolen 5121 A is delivered in pellet form, contains antioxidants and has a broad molecular weight distribution. Lupolen 5121 A is not intended for use in medical and pharmaceutical applications.

Lupolen 5261 Z is a high density polyethylene with high impact resistance, high rigidity, high chemical resistance and good ESCR. It is delivered in powder form and contains antioxidants. Typical customer applications include open top drums and jerry cans for the packaging of dangerous goods. Lupolen 5261 Z is not intended for use in medical and pharmaceutical applications.

Lupolen 5261Z HI is a high density polyethylene with outstanding impact resistance, high rigidity, good chemical resistance and good ESCR. It is delivered in powder form and contains antioxidants. Typical customer applications include L-ring drums for the packaging of dangerous goods. Lupolen 5261Z HI is not intended for use in medical and pharmaceutical applications.

Lupolen 5261Z Q 456 B POWDER is a high density polyethylene (HDPE) with very high melt viscosity for ram extrusion of peroxide cross-linked pipes (PEX-a). The product is supplied as a nominal 25 mesh (730 µm) powder.

Lupolen 5261Z Q456 B is a high density polyethylene (HDPE) powder with high melt viscosity for ram extrusion of peroxide crosslinked pipes (PE-Xa).

Lupolen 5261Z Q 456 POWDER is a high density polyethylene (HDPE) with very high melt viscosity for ram extrusion of peroxide cross-linked pipes (PEX-a). The product is supplied as a nominal 25 mesh (820 µm) powder.

Lupolen 5261Z Q456 is a high density polyethylene (HDPE) powder with high melt viscosity for ram extrusion of peroxide crosslinked pipes (PE-Xa). It is also used for compression molded plates.

Lupolen 5261ZS is a high density polyethylene with high ESCR, high impact resistance, high rigidity and good chemical resistance. It is delivered in powder form and contains antioxidants. Typical customer applications include drums and jerry cans for the packaging of dangerous goods. Lupolen 5261ZS is not intended for use in medical and pharmaceutical applications.

Lupolen 5461 B Q 471 B is a high density polyethylene (HDPE) powder with high melt viscosity for extrusion of peroxide crosslinked pipes (PE-Xa). Typical application: Crosslinked pipes, PE-Xa (peroxide). For regulatory compliance information, see Lupolen 5461B Q471 B Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS). This grade is not intended for medical and pharmaceutical applications. This grade is supported for use in drinking water applications.

Lupolen 5461 B Q 471 is a high density polyethylene (HDPE) powder with high melt viscosity for extrusion of peroxide crosslinked pipes (PE-Xa). Typical application: Crosslinked pipes, PE-Xa (peroxide) It is not intended for medical and pharmaceutical applications.

Lupolen 5461 B Q 471NA POWDER is a high density polyethylene (HDPE) with high melt viscosity for extrusion of peroxide cross-linked pipes (PEX-a). The product is supplied as a nominal 25 mesh (725 µm) powder.

Lupolen GX 4087 is a low density polyethylene (LDPE), natural colour, without antioxidants and very low gel level for medium high voltage cable insulation. LyondellBasell quality system is designed to assure the high standards of cleanliness of Lupolen GX 4087. A dedicated production procedure is maintained and the product is tested by using online measurements. This grade is not intended for use in medical or pharmaceutical applications.

Lupolen GX 5007 is a new generation hexene linear medium density polyethylene for rotational molding. Lupolen GX 5007 is a fully UV-stabilized and pelletized polymer. It is not intended for use in medical and pharmaceutical applications.

Lupolen GX 5038 is a new generation hexene linear high-density polyethylene for injection molding. Typical customer applications may include SCR reservoirs (SCR = Selective Catalytic Reduction). Lupolen GX 5038 is a pelletized polymer. It is not intended for use in medical and pharmaceutical applications.

Lupolen UHM 5000 is an ultra high molecular weight polyethylene (UHMWPE) with an average molecular weight of 5 million. The long molecular chains leed to unique properties: Highest abrasion resistance of any thermoplastic materials, excellent impact strength, low friction, good chemical resistance and stress crack resistance. Lupolen UHM 5000 is used in compression moulding and ram extrusion processes. The material is supplied in form of coarse natural powder. The larger particle size and the very low fines content result in good free flowing property and less dust generation during handling and processing. For regulatory compliance information see Lupolen UHM 5000 Regulatory Affairs Product Stewardship Information/Certification Data Sheet (RAPIDS). The material is not intended for medical and pharmaceutical applications.

Malen E FABS 23-D022 is designed for fine packaging films with thicknesses starting at 25 micons. The presence of anti-block and slip agent means extruded film may be used on automatic packaging systems. Films made out of Malen E FABS 23-D022 are notable for their high gloss and transparency. This product is not intended for use in medical and pharmaceutical applications.

The low melt flow index of this PE resin ensures that the products are highly resistant to impact and are exceptionally strong and durable. The excellent mechanical properties obtained in films made from Malen E FGAN 18-D003 make them ideal for production of transportation bags, shrink film for pallet packaging and many other applications. Malen E FGAN 18-D003 contains some anti-oxidant, which increases the polymer's resitance to degradation during processing and reduces its tendency to turn jelly. This product is not intended for use in medical and pharmaceutical applications.

Malen E FGNX 23-D006 is suitable for manufacture of highly transparent, very fine films, but also blow extrusion of small containers is possible . Extruded films starting with a thickness starting with 40 microns exhibit very good mechnical properties and are notable for their high transparency and gloss. This product is not intended for use in medical and pharmaceutical applications.

Malen E FGNX 23-D022 is suitable for manufacture of highly transparent, very fine films. ButBut also blow moulding or injection moulding is possibile due its rheological feature. Extruded films starting with a thickness of 25 microns exhibit very good mechnical properties and are notable for their high transparency and gloss. This product is not intended for use in medical and pharmaceutical applications.

Fractional Flow Material

Microthene F polyolefin powders are ultra-fine, spherically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.

Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.

Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size. Materials may contain flow-enhancing agents as required for processing and handling.

Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.

Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.

Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.

GR 51100 polyolefin powders are ground, irregularly-shape particles for use in a broad range of specialty applications. GR 51100 powders combine the unique properties of a polyolefin resin with a small ground particle size.

GR54200 polyolefin powders are ground, irregularly-shape particles for use in a broad range of specialty applications. GR54200 powders combine the unique properties of a polyolefin resin with a small ground particle size.