Ketron® CM HPV Polyetheretherketone PEEK shapes are compression molded and carbon fiber reinforced, with graphite and PTFE lubricants. Due to this, this grade has the lowest coefficient of friction and the best machinability of all PEEK materials. Ketron CM HPV PEEK’s combination of low wear and friction and high LPV, make this material an ideal solution for service bearings, bushings, insulators, valves, and seals.

Ketron Sterra CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron Sterra CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental data sheet.

Compared with Ketron® 1000 PEEK SP this PTFE filled PEEK SP grade offers improved frictional properties (considerably reduced coefficient of friction) and higher pressure-velocity capabilities.

Ketron® TX Polyetheretherketone PEEK FG (Food Grade) is an internally lubricated, EU 10/2011 and FDA Compliant grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing, and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron TX PEEK FG components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Ketron® TX Polyetheretherketone PEEK is an internally lubricated, EU 10/2011 and FDA Compliant grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing, and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron® TX PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Ketron VMX Food Grade (FG) PEEK is a EU 10/2011 and compositional FDA 21 CFR § 177.2415 compliant material that offers extreme dimensional stability, high strength and temperature resistance. Ketron VMX PEEK FG shapes can be easily traced by different detection systems installed to detect contamination of the foodstuffs, allowing global food processors to safely avoid costly recalls caused by foreign contamination. Due to their superior resistance to wear and corrosion, Ketron VMX PEEK FG components are favored for applications in the food processing and packaging industry such as pistons, manifolds, valves, and mixing vessels.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres / Mineral filler. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Carbon fibre. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Carbon fibre. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Carbon fibre. High tensile modulus. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Carbon fibre. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK). Unfilled. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Glass fibres. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK) based compound. Carbon fibre. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

Polyetheretherketone (PEEK). Unfilled. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.

High thermal conductivity product based on Polyetheretherketone (PEEK). Graphite.

Radiopaque compound based on Polyetheretherketone (PEEK). Special mineral filler.

Self-lubricating product based on Polyetheretherketone (PEEK). PTFE. Aramid fibres.

Self-lubricating product based on Polyetheretherketone (PEEK). PTFE. Glass fibres.

Self-lubricating product based on Polyetheretherketone (PEEK). PTFE. Carbon fibre.

Self-lubricating product based on Polyetheretherketone (PEEK). Graphite / PTFE. Carbon fibre.

Self-lubricating product based on Polyetheretherketone (PEEK). PTFE.

Self-lubricating product based on Polyetheretherketone (PEEK). Graphite / PTFE.

Semiconductive/dissipative product based on Polyetheretherketone (PEEK). Carbon nanotubes.

LNP LUBRICOMP LCL33 compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Electrically Conductive.

LNP LUBRICOMP LCL33 compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Electrically Conductive.

LNP LUBRICOMP LCL33E compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant, Electrically Conductive.

LNP LUBRICOMP LCL33EXQ compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Easy Molding, Electrically Conductive.

LNP LUBRICOMP LCL36 compound is based on Polyetheretherketone (PEEK) resin containing 30% carbon fiber and 15% PTFE. Added features of this grade include: Electrically Conductive, Internally Lubricated, Wear Resistant.

LNP LUBRICOMP LCL36E compound is based on Polyetheretherketone (PEEK) resin containing 30% carbon fiber and 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant, Electrically Conductive.

LNP LUBRICOMP LCL36E compound is based on Polyetheretherketone (PEEK) resin containing 30% carbon fiber and 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant, Electrically Conductive.

LNP LUBRICOMP LFL36E compound is based on Polyetheretherketone (PEEK) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Wear Resistant, Easy Molding.

LNP LUBRICOMP LGL33 compound is based on Polyetheretherketone (PEEK) resin containing graphite and 15% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP LL002 compound is based on Polyetheretherketone (PEEK) resin containing 10% PTFE. Added features of this grade include: Wear Resistant.

LNP LUBRICOMP LL003 compound is based on Polyetheretherketone (PEEK) resin containing 15% PTFE. Added features of this grade include: Wear Resistant.