LE0315-99 has the same melt flow properties as the peroxide containing material.

LE0520-99 has the same melt flow properties as the peroxide containing material.

THERMOPLASTIC NON-HALOGENATED FLAME RESISTANT POLYOLEFIN JACKETING COMPOUND (RoHS COMPLIANT)

Casico FR6083 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%.

CEVO®-clean J-1819 is a highly efficient cleaning concentrate that enables particularly thorough and user-friendly cleaning of extruders, injection moulding machines and blow-moulding machines, and also hot runner moulds. The particular level of effectiveness of CEVO®-clean J-1819 is based on a combined chemical-physical mode of action which uses solid solvents and non-abrasive minerals that have been optimally coordinated with each other. General information Thorough removal of stubborn deposits, burns and material residues for all commonly used thermoplastics. Cylinders and screws will be subject to a gentle mechanical cleaning. Removal of stubborn deposits from metallic surfaces, including the dead zones of machines. Processing temperature range up to 360 °C, depending on the carrier polymer used. CEVO®-clean J-1819 is a versatile "one for all" concentrate for nearly all commonly used thermoplastics and is as a result very cost-effective. The product is always diluted with a polymer that is also the basis for the subsequent material. Therefore only one cleaning concentrate is required for nearly all commonly used polymers. CEVO®-clean J-1819 enables materials and colours to be changed quickly and therefore enables shorter downtimes as well as lower reject costs. The cleaning extrudate arising can be granulated and can therefore be reused - in particular in the event of lower levels of contamination. Application - Production of a mixture (dryblend) of CEVO®-clean J-1819 and an unfilled polymer. The polymer type that is to be used in the subsequent new production, or that which forms the basis of the new compound that is to be processed must always be used. - Mixture instructions: 20 - 25 parts CEVO®-clean J-1819 + 75 - 80 parts polymer) - Process the mixture on the corresponding machine using the normal processing parameters of the polymer used - Flush the machine with the polymer that was used for the mixture. - New production can be started immediately after cleaning has been completed.

Cyclics Formlite is a thermoplastic syntactic foam plug assist material, designed specifically for the thermoforming industry. Unlike alternative plug assist materials, Formlite is manufactured using advanced engineering CBT and high-quality glass microspheres. Formlite provides low thermal conductivity, excellent thermal stability, and superior properties required to achieve fine details in the formed part. Cyclics developed Formlite to meet the demands for a high temperature plug assist material that machines freely to a superior quality surface. The unique formulation provides virtually dust-free machining while giving the user extended durability, lower heat up times, greater throughput, and clearer parts. Features: - Easy Machinability - Smooth surface finish - High heat distortion temperature - Excellent durability - Dimensional stability - Clarity - Custom casting Applications: Formlite syntactic foam can be used to form a variety of polymer sheet materials, including in-line and sheet-feed systems and is widely used in the food, medical and packaging industries to form a wide variety of components. Formlite works exceptionally well with polyolefin, polypropylene, APET, and CPET.

Laser HDPE HX 17 is a rigid, very good free flowing Laser Sinter powder. Suitable for parts from above 1,5mm. 100% reusable. No blending and mixing of old and new powder. It can be varnished with comon plastic paint. Consistent against acid and base, water, alcohol, oil and gasoline. It can be welded and crosslinked. Very smooth surface, epecially suitable for masterforms for vacuum casting. Medium particle size:50µm. Max.particle size: 80µm. Recomended layerheight: 100µm

DI-COAT™ E-4599 Shore 90-95 A, elastomeric coatings that have been specifically designed to reproduce exact surface details. DI-COAT™ E-4599 is excellent for electrical insulation applications requiring non or low sag materials. DI-COAT™ E-4599 is semi - rigid and formulated to withstand repeated abuse.

DI-COAT™ E-4669 Shore 60-65 D, elastomeric coatings that have been specifically designed to reproduce exact surface details. DI-COAT™ E-4669 is highly abrasion resistant and formulated to withstand repeated abuse.

DI-COAT™ R-4721 / DI-COAT™ R-4721 LV (lower viscosity) Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT™ R-4721 is ideal for use on vertical or sloping surfaces where flow or drain - off cannot be tolerated. DI-COAT™ R-4721 is easy to use, and should be used on insulating applications where conformal coating is required. DI-COAT™ R-4721 LV exhibits similar characteristics to DI-COAT™ R-4721, but has a lower viscosity.

DI-COAT™ R-4721 / DI-COAT™ R-4721 LV (lower viscosity) Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT™ R-4721 is ideal for use on vertical or sloping surfaces where flow or drain - off cannot be tolerated. DI-COAT™ R-4721 is easy to use, and should be used on insulating applications where conformal coating is required. DI-COAT™ R-4721 LV exhibits similar characteristics to DI-COAT™ R-4721, but has a lower viscosity.

DI-COAT R-4721 / DI-COAT R-4721 LV (lower viscosity) Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT R-4721 is ideal for use on vertical or sloping surfaces where flow or drain-off cannot be tolerated. DI-COAT R-4721 is easy to use, and should be used on insulating applications where conformal coating is required. DI-COAT R-4721 LV exhibits similar characteristics to DI-COAT R-4721, but has a lower viscosity.

DI-COAT R-4721 / DI-COAT R-4721 LV (lower viscosity) Shore 90 D, room temperature curing, medium to high thixotropic coating for dielectric insulating applications. DI-COAT R-4721 is ideal for use on vertical or sloping surfaces where flow or drain-off cannot be tolerated. DI-COAT R-4721 is easy to use, and should be used on insulating applications where conformal coating is required. DI-COAT R-4721 LV exhibits similar characteristics to DI-COAT R-4721, but has a lower viscosity.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4568 A tough, REPAIRABLE, shock resistant potting compound for short and long run productions. DI - PAK™ E - 4568 has excellent insulating properties, a very low moisture vapor transmission rate, can be operated from - 60°C to +100°C, and performs in both wet and dry environments. It can be easily trimmed with a knife, making repairs quick and easy.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4500 SERIES Flexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.

DI - PAK™ E - 4600 SERIES Flexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Accelerated gel times, and black or unpigmented versions are available.