DFDA-1224 NT is a natural high molecular weight, low density polyethylene. DFDA-1224 NT has been designed for use as a crosslinkable homopolymer for use with organic peroxides. The molecular characteristics of the product provide excellent extrusion processing, high efficiency of crosslinking, and excellent mechanical properties.

Dow™ Electrical & Telecommunications DFDA-3642 NT is a hexene-copolymer LLDPE designed for Low Voltage cable applications. It is intended for use in a one-step (monosil®) or two-step (Sioplas®) process in unfilled or filled (such as HFFR) systems. It provides an excellent balance of processability, mechanical properties and electrical properties. An appropriate amount of metal deactivator and antioxidant should be added to meet the aging requirements. The material does not contain slip or anti-block additives. Specifications DFDA-3642 NT meets the following material specifications: - ISO 17855-PE-LLD,, J-AGN, 18-D045 - ASTM D 1248: Type I, Class A, Category 3

DFDA-4850 NT is a low density, thermoplastic, unfilled polyethylene compound designed for starting-up and shutting-down medium and high voltage (5 kV and higher) power cable insulation extruders. It has a high degree of cleanliness required for these applications. DFDA-4850 NT is a nominal 2.0 melt index, 0.92 density, high pressure LDPE resin that has been stabilized with an antioxidant system that is compatible with HFDB-4201 EC, HFDB-4201 SC and HFDB-4202 EC. Cleanliness Requirements DFDA-4850 NT is required to meet strict standards for cleanliness as established by The Dow Chemical Company for an unfilled, thermoplastic insulation purge-type compound. The product is tested to ensure a high level of cleanliness. Pellet samples are visually inspected and extruded tapes are scanned by an automatic inspection system in a class 10,000 clean room. The purity data is managed using an acceptance sampling plan which ensures that the product in the shipping container meets or exceeds the required cleanliness standards.

DOW™ Wire & Cable DFNK-0012 NT is a masterbatch for use as a nucleating agent in gas injection applications. It is specially designed for easy incorporation into HDPE and LDPE. When used correctly, it allows the formation of small, uniformly distributed cells. The masterbatch is a 2% concentrate of an exothermic chemical blowing agent in a high pressure LDPE base resin. It should be used at 0.5-3% masterbatch concentration. DFNK-0012 NT contains a stabilizer protecting against thermal oxidation and catalytic degradation by copper. Applications: Typical applications include RF cable and CATV drop cable with expansion rates of up to 80 %.

HFDA-9217 Black, with a density of 0.92, is a is a low-density, crosslinkable, black colored polyethylene compound with 0.5% carbon black designed for area power distribution wires covering up to 35 kV. It has the following important advantages: - Good thermal stability and weather resistivity - Excellent tracking resistance - High curing speed

DynaMix™ 475-AFR is a masterbatch containing a 2:1 blend of decabromodiphenylethane and antimony trioxide in a low density polyethylene carrier. This combination is recommended to be used in polyethylene and compatible systems at levels of 5 to 40%. Other loading levels and ratios are available upon request. Features: - Low Let Down Ratio - Good dispersion for better physical properties and increased impact strength - Non-Blooming - Good processability Applications: - Films and Sheets - Injection molding - Compounding - Profile Extrusion

ECOmpoundS® LDPE regrind natural MFI 7

A wide range of polymer bases are employed to produce conductive plastics, including the polyolefines, nylons and ABS.Typical applications are illustrated using ECP 104 mineral filled conductive polypropylene which can be used to mould a variety of containers for static sensitive devices and PCB handling equipment. The mineral filler produces rigid mouldings with excellent dimensional stability. - Permanently conductive - Easily processed on conventional moulding equipment - Grades tailored to suit a variety of requirements.

A wide range of polymer bases are employed to produce conductive plastics, including the polyolefines, nylons and ABS.Typical applications are illustrated using ECP 104 mineral filled conductive polypropylene which can be used to mould a variety of containers for static sensitive devices and PCB handling equipment. The mineral filler produces rigid mouldings with excellent dimensional stability. - Permanently conductive - Easily processed on conventional moulding equipment - Grades tailored to suit a variety of requirements.

Egyeuroptene LDPE 2020 Resin has high stiffness, good toughness, and excellent gloss. Applications: - Medium sized molding - Cosmetic containers - Bottle closures - Food containers

ELTEX ® I8H430Z is a Low Density Polyethylene ionomer for blown or cast film and extrusion coating applications. Benefits and Features ELTEX ® I8H430Z is an ionomer, produced by neutralization with zinc of an ethylene - methacrylic acid (EMAA) copolymer. It has been designed to provide the following properties : - High seal strength through contaminants - Good adhesion with polar material This ionomer doesn't contain any technical additive (slip & antiblock)

Low Density Polyethylene homopolymer for pharmaceutical extrusion coating & injection moulding Benefits & Features Eltex® MED PH19N630 is an LD-polyethylene produced in a high-pressure process intended for extrusion coating and injection moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH19N630 is produced according to good manufacturing practice - additive-free - good processing Applications - extrusion coating - primary and secondary packaging - press-fit stoppers - caps, closures - injected tubes

Low Density Polyethylene for Pharmaceutical Blow Moulding Benefits & Features Eltex® MED PH22D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH22D630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH22D630 is available in granular form. Applications Eltex® MED PH22D630 can be used in "blow-fill and seal" machines for the production ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. The product is not intended for heat sterilisation

Low Density Polyethylene for Pharmaceutical Blow-Fill-Seal Benefits & Features Eltex® MED PH23H630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH23H630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH23H630 is available in granular form. Applications Eltex® MED PH23H630 can be used in "blow-fill and seal" machines for the production of ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as blow moulding or injection moulding. The product is not intended for heat sterilization.

Low Density Polyethylene for Healthcare applications Benefits & Features Eltex® MED PH23T630 is a LD-polyethylene for injection moulding having excellent flow properties allowing short cycle time or easy filling of long flow-paths. The moulded article is characterized by low degree of guilt-in stress & good flexibility Eltex® MED PH23T630 is produced according to good manufacturing practice and is additive-free. Applications Eltex® MED PH23T630 is recommended for injection moulding of: - Flexible lids - Caps and closures - Pharmaceutical & diagnostic packaging Eltex® MED PH23T630 can be sterilized with Eto-treatment or with Gamma radiation up till 50 kGy

Low Density Polyethylene for Pharmaceutical Blow Moulding Benefits & Features Eltex® MED PH27D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH27D630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH27D630 is available in granular form. Applications Eltex® MED PH27D630 can be used in "blow-fill and seal" machines for the production ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. Eltex® MED PH27D630 will withstand heating up to 110°C and therefore units made from this product may be steam treated to max. 110°C.

Low Density Polyethylene for Pharmaceutical Blow moulding Benefits & Features Eltex® MED PH30D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH30D630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH30D630 is available in granular form. Applications Eltex® MED PH30D630 can be used in "blow-fill and seal" machines for the production of ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. Eltex® MED PH30D630 withstands steam sterilization above 110°C.

EPOLENE ® C-10 is a branched low density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE ® C-10 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Medium molecular weight - Useful in color concentrates Applications: - Automotive - Hot melt adhesives - Packaging - Compounding - Wax modification

EPOLENE ® C-12 is a branched low density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE ® C-12 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Useful in color concentrates Applications: - Automotive carpet backing - Hot melt adhesives - Packaging - Compounding - Wax modification

EPOLENE ® C-13 is a branched low density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE ® C-13 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Useful in color concentrates Applications: - Automotive carpet backing - Hot melt adhesives - Packaging - Compounding - Wax modification

EPOLENE ® C-13P is a branched low density polyethylene powder with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE ® C-13P polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Medium molecular weight - Useful in color concentrates Applications: - Automotive carpet backing - Compounding - Hot melt adhesives - Packaging - Wax modification

EPOLENE® C-15 is a branched low-density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE® C-15 polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Useful in color concentrates Applications: - Automotive - Hot melt adhesives - Packaging - Compounding - Wax modification

EPOLENE® C-15P is a branched low-density polyethylene homopolymer with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with EPOLENE® C-15P polymer exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat sealability. Attributes: - Powdered Product Form - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Useful in color concentrates Applications: - Automotive - Hot melt adhesives - Packaging - Compounding - Wax modification

EPOLENE® C-17 is a branched low-density polyethylene with a relatively high melt point and viscosity compared to other EPOLENE C-type Polymers. It is useful to modify paraffin wax to improve the blend viscosity, grease resistance, blocking temperature, scuff resistance, and gloss. EPOLENE® C-17 polymer commonly replaces granular LLDPE as the base polymer in color concentrates because it’s easier to process and has higher output rates. EPOLENE® C-17 polymer has good high temperature stability, low color, low temperature flexibility, and excellent compatibility with various hydrocarbon tackifying resins. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Useful in color concentrates Applications: - Automotive carpet backing - Compounding - Hot melt adhesives - Packaging - Wax modification

EPOLENE ® C-17P is a branched low density polyethylene powder with a relatively high melt point and viscosity compared to other EPOLENE ® C-type Polymers. It is useful to modify paraffin wax to improve the blend viscosity, grease resistance, blocking temperature, scuff resistance, and gloss. EPOLENE ® C-17P polymer commonly replaces granular LLDPE as the base polymer in color concentrates because it's easier to process and has higher output rates. EPOLENE ® C-17P polymer has good high temperature stability, low color, low temperature flexibility, and excellent compatibility with various hydrocarbon tackifying resins. Attributes: - Powdered Product Form - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color Applications: - Automotive carpet backing - Compounding - Hot melt adhesives - Packaging - Wax modification

EPOLENE® C-23 is a branched low-density polyethylene with a relatively high melt point and viscosity compared to other EPOLENE® C-type polymers. It is useful to modify paraffin wax to improve grease resistance, blocking temperature, scuff resistance, and gloss. EPOLENE® C-23 polymer is commonly used for extrusion coating of board stock. EPOLENE® C-23 polymer has good high temperature stability, low color and low temperature flexibility. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color Applications: - Automotive carpet backing - Extrusion coating - Wax modification - Compounding

EPOLENE® C-23P is a branched low-density polyethylene with a relatively high melt point and viscosity compared to other EPOLENE® C-type polymers. It is useful to modify paraffin wax to improve grease resistance, blocking temperature, scuff resistance, and gloss. EPOLENE® C-23P polymer is commonly used for extrusion coating of board stock. EPOLENE® C-23P polymer has good high temperature stability, low color and low temperature flexibility. Attributess: - Powdered Product Form - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color Applications: - Automotive carpet backing - Extrusion coating - Wax modification - Compounding

EPOLENE ® E-10 is an oxidized low molecular weight polyethylene used in emulsifiable applications. The low molecular weight and low softening point contribute to the production of stable, low color emulsions by both atmospheric (wax to water) and pressure emulsification methods. In water based emulsion floor finishes, it imparts good slip resistance, toughness and durability to the polish film. Attributes: - Imparts slip resistance, durability, and toughness to floor finishes - Oxidized to provide functionality - Produces stable water based emulsions - Oxidized low density polyethylene Applications: - Compounding - Building and construction - Hot melt adhesives - Emulsions - Wax modification

EPOLENE® E-10P is an oxidized low molecular weight polyethylene powder used in emulsifiable applications. The low molecular weight and low softening point contribute to the production of stable, low color emulsions by both atmospheric (wax to water) and pressure emulsification methods. In water-based emulsion floor finishes, it imparts good slip resistance, toughness and durability to the polish film. Attributes: - Powdered Product Form - Imparts slip resistance, durability, and toughness to floor finishes - Oxidized to provide functionality - Produces stable water-based emulsions - Oxidized low density polyethylene Applications: - Compounding - Building and construction - Hot melt adhesives - Emulsions - Wax modification

EPOLENE ® E-14 is an oxidized low molecular weight polyethylene used in emulsifiable applications. It is useful as a lubricant in processing rigid and flexible polyvinyl chloride (PVC) and as a processing aid for preparing color concentrates. EPOLENE ® E-14 polymer is listed with NSF International under Standard 61 Drinking Water System Components Health Effects. Attributes: - Imparts slip resistances, durability, and toughness to floor finishes - Listed with NSF International for use as a lubricant in PVC melt processes - Oxidized to provide functionality - Produces stable water based emulsions - Oxidized low density polyethylene Applications: - Compounding - Solvent based coatings - PVC lubrication - Waterborne adhesives - Wax modification

EPOLENE ® E-14E is an oxidized low molecular weight polyethylene used in emulsifiable applications. The low molecular weight and low softening point to contribute to the production of stable, low color emulsions by both atmospheric (wax-to-water) and pressure emulsification methods. EPOLENE ® E-14E polymer imparts excellent slip resistance to floor polish films. Attributes: - Imparts slip resistances, durability, and toughness to floor finishes - Oxidized to provide functionality - Produces stable water based emulsions - Oxidized low density polyethylene Applications: - Automotive - Emulsions - PVC lubrication - Solvent based coatings - Compounding

EPOLENE ® E-14EP is an oxidized low molecular weight polyethylene powder used in emulsifiable applications. The low molecular weight and low softening point to contribute to the production of stable, low color emulsions by both atmospheric (wax-to-water) and pressure emulsification methods. EPOLENE ® E-14EP polymer imparts excellent slip resistance to floor polish films. Attributes: - Powdered Product Form - Imparts slip resistance, durability, and toughness to floor finishes - Listed with NSF International for use as a lubricant in PVC melt processes - Oxidized to provide functionality - Produces stable water-based emulsions - Oxidized low density polyethylene Applications: - Compounding - Solvent based coatings - Emulsions - PVC lubrication

EPOLENE® E-14P is an oxidized low molecular weight polyethylene used in emulsifiable applications. It is useful as a lubricant in processing rigid and flexible polyvinyl chloride (PVC) and as a processing aid for preparing color concentrates. EPOLENE® E-14P polymer is listed with NSF International under Standard 61 Drinking Water System Components Health Effects. Attributes: - Powdered Product Form - Imparts slip resistance, durability, and toughness to floor finishes - Listed with NSF International for use as a lubricant in PVC melt processes - Oxidized to provide functionality - Produces stable water-based emulsions - Oxidized low density polyethylene Applications: - Compounding - Solvent based coatings - PVC lubrication - Emulsions

EPOLENE ® E-16 is an oxidized low molecular weight polyethylene having properties intermediate between EPOLENE ® E-10 polymer and EPOLENE ® E-14 polymer. It provides stable, low color emulsions by both atmospheric (wax-to-water) and pressure emulsification methods for such end uses as textiles, floor polishes, inks, and paint rheological additives. Attributes: - Imparts slip resistances, durability, and toughness to floor finishes - Oxidized to provide functionality - Produces stable water based emulsions - Oxidized low density polyethylene Applications: - Compounding - Emulsions - PVC lubrication - Wax modification

EPOLENE® E-20 is an oxidized low molecular weight polyethylene with exceptional hardness and low color used in emulsifiable applications. The low softening point and low viscosity contribute to the hardness, short drying time, and excellent gloss in coatings. Pressure equipment is required for emulsification of this material. EPOLENE® E-20 polymer is an excellent performer in high-speed buffable floor finishes. It improves buffability and durability. Attributes: - Imparts slip resistances, durability, and toughness to floor finishes - Oxidized to provide functionality - Produces stable water based emulsions - Useful as a lubricant for HDPE extrusion - Oxidized low density polyethylene for PVC lube Applications: - Compounding - PVC lubrication - Emulsions - Wax modification

EPOLENE® E-20P is an oxidized low molecular weight polyethylene with exceptional hardness and low color used in emulsifiable applications. The low softening point and low viscosity contribute to the hardness, short drying time, and excellent gloss in coatings. Pressure equipment is required for emulsification of this material. EPOLENE® E-20P polymer is an excellent performer in high-speed buffable floor finishes. It improves buffability and durability. Attributes: - Powdered Product Form - Imparts slip resistance, durability, and toughness to floor finishes - Oxidized to provide functionality for PVC lubrication - Produces stable water-based emulsions - Useful as a lubricant for HDPE extrusion Applications: - Compounding - PVC lubrication - Emulsions - Wax modification

EPOLENE ® N-10 is a nonemulsifiable low molecular weight polyethylene used to aid in pigment dispersion and mold release, to improve scuff resistance in inks and increase tensile strength in wax blends. Attributes: - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Medium molecular weight - Useful in color concentrates Applications: - Compounding - Hot melt adhesives - Solvent based coatings - Packaging - Wax modification

EPOLENE ® N-10P is a nonemulsifiable low molecular weight polyethylene powder used to aid in pigment dispersion and mold release, to improve scuff resistance in inks and increase tensile strength in wax blends. Attributes: - Powdered Product Form - Enhances paraffin wax coating properties like gloss, grease resistance, and MVTR - Excellent thermal stability - Low color - Medium molecular weight - Useful in color concentrates Applications: - Compounding - Packaging - Solvent based coatings - Wax modification

EPOLENE ® N-11 is a non-emulsifiable low molecular weight polyethylene used to aid in pigment dispersion and mold release, to improve scuff resistance in inks and increase tensile strength in wax blends. Attributes: - Aids in pigment dispersion - Easy to melt blend with natural or synthetic waxes - Improve physical properties of paper coatings - Increases scuff and rub off resistance in inks - Low density polyethylene Applications: - Compounding - Automotive carpet heavy layer - Graphic arts - Hot melt adhesives - Packaging - Solvent based coatings - Wax modification

EPOLENE ® N-11P is a non-emulsifiable low molecular weight polyethylene powder used to aid in pigment dispersion and mold release, to improve scuff resistance in inks and increase tensile strength in wax blends. Attributes: - Powdered Product Form - Aids in pigment dispersion - Easy to melt blend with natural or synthetic waxes - Improve physical properties of paper coatings - Increases scuff and rub off resistance in inks - Low density polyethylene powder Applications: - Compounding - Automotive heavy layer - Graphic arts - Packaging - Solvent based coatings - Wax modification