DINALEN® 20 is low density polyethylene containing no additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 20 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 20 is extruded at recommended melt temperature range between 175°C and 200°C. Recommended film thickness: 0.050 mm to 0.200 mm.

DINALEN® 30 is low density polyethylene containing no additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 30 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 30 is extruded at recommended melt temperature range between 165°C and 185°C. Recommended film thickness: 0.030 mm to 0.100 mm.

DINALEN® 35 is low density polyethylene containing additives. It is primarily intended for blow film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 35 exhibits excellent very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 35 is extruded at recommended melt temperature range between 165°C and 185°C. Recommended film thickness: 0.030 mm to 0.100 mm.

DINALEN 50 is low density polyethylene containing no additives. It is primarily intended for blow and cast film extrusion while other processing techniques can be used to a lesser extent. DINALEN 50 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN 50 is extruded at recommended melt temperature range between 160°C and 180° C. Recommended film thickness: 0.025 to 0.060 mm. Application - Thin non-slippery film of high gloss and transparency - Heat shrinkable film with excellent stiffness for industrial bundling - Extruded foams with physical blowing agent - Small diameter pipe extrusion - Wire and cable sheathing - Injection moulded thick-walled products - Blown packaging and other shallow objects - Mixing and co-extrusion with suitable polyolefin grades

DINALEN® 55 is low density polyethylene containing slip and anti-blocking additives. It is primarily intended for blow and cast film extrusion while other processing techniques can be used to a lesser extent. DINALEN® 55 exhibits very good draw-down with good balance of stiffness, mechanical and optical properties of extruded film. DINALEN® 55 is extruded at recommended melt temperature range between 160°C and 180°C. Recommended film thickness: 0.25 to 0.05mm. Application - Thin slippery film of high gloss and transparency - Production of film for lamination - Production of film for a variety of primary flexible packaging like FFS for foodstuffs, sanitary articles, chemicals - Film production for a many kinds of carrier-bags, like airport security bags, DTK bags, cooler-bags, T-shirt-bags, shoulder-bags - Blending with DINALEN 50 to obtain a less slippery film - Mixing and co-extrusion with suitable i-polybutene-1 grades to produce film for peel systems - Mixing and co-extrusion with suitable polyolefin grades

DINALEN® 65 is low density polyethylene containing slip and anti-blocking additives. It is intended for thin blow film extrusion. Other processing techniques can be used in less extent. DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C. DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.

DOW ENDURANCE™ HFDB-4201 VC is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. It has a very low level of contamination and bears the designation Very Clean (VC). DOW ENDURANCE™ HFDB-4201 VC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 VC is recommended for the insulation of power distribution and transmission cables rated at less than 150 kV with stresses less than 7 kV/mm. Specifications DOW ENDURANCE™ HFDB-4201 VC is designed for use in power distribution and transmission cables. Cables insulated with DOW ENDURANCE™ HFDB-4201VC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 60502, 60840 - GB/T 12706 - ANSI/ICEA*: S-94-649, S-97-682, S-93-639/NEMA WC74 - CENELEC HD 620 S2 - BSI BS 6622, 7870-4 *Applicable to USA manufactured product only.

Ultra Clean Polyethylene Compound for Extra High Voltage Power Cable Insulation DOW ENDURANCE™ HFDK-4201 EHV is a long-life, crosslinkable, low-density, polyethylene insulation compound of extreme purity developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE HFDK-4201 EHV is equipped with a non-migrating stabilizer providing high thermal stability, long term stability, and optimum cross linking behavior. Applications: DOW ENDURANCE HFDK-4201 EHV is recommended especially for the insulation of extra high voltage power transmission cables >220kV. Specifications: Cables insulated with DOW ENDURANCE HFDK-4201 EHV would be expected to meet the requirements in the following standards when processed using state-of-the-art cable manufacturing practices - IEC: 62067, 60840 - CENELEC: HD 632 S2 - AEIC: CS9 - ANSI/ICEA: 108-720-2004 - GB/T 11017 , GB/Z 18890

DOW ENDURANCE™ HFDK-4202 EC Polyethylene Compound is a long life water tree retardant, unfilled, crosslinkable low-density polyethylene compound. The permanent tree retardant additive provides improved performance service involving exposure to moisture while retaining the excellent physical, electrical and processing attributes of crosslinkable polyethylene. DOW ENDURANCE HFDK-4202 EC compound provides electric utilities with: - State-of-the-art "water" tree-retardant technology, consistently outperforming conventional XLPE in all accelerated cable wet aging tests at ambient and elevated temperatures - Technology which has been proven in the field for over 25 years, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE HFDK-4202 EC Compound represents the state-of-the-art in tree-retardant, power cable insulation compounds. Specifications DOW ENDURANCE HFDK-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables, especially in underground applications. DOW ENDURANCE HFDK-4202 EC provides improved performance over XLPE cables and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with DOW ENDURANCE HFDK-4202 EC, using sound commercial manufacturing practice, would be expected to meet the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S1, Part 1, DIX 3 to 14 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

DOWLEX™ GM AX01 Polyethylene Resin was developed as rheology modifier. The product is intended to be side feeded in low percentage with selected DOW LLDPE Resins portfolio for extrusion processes. It increases melt strength and provide a more shear thinning behavior to the DOW LLDPE achieving enhanced properties such as: extrusion process stability as well as improved mechanical properties for further downgauging, with optimized shrinkage behavior. This unique technology was designed to deliver differentiated properties for collation shrink, agricultural films, lamination and FFS applications. Complies with: - U.S. FDA 21 CFR 174.5 (see notes) Consult the regulations for complete details.

DOW LDPE™ 132G Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230°C. This resin, when properly fabricated, shows an excellent combination of processability, stiffness and physical properties. This product does not contain slip nor antiblock additives. Note: Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Consult the regulations for complete details Applications: - Heavy duty industrial film - Shrink film

- A barefoot resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used in shrink film, shipping sacks, construction film and other gauge film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Consult the regulations for complete details.

- A medium anti-block resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used for thick gauge film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2. - Canadian HPFB No Objections (With Limitations) - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 150E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilising melt temperatures between 170 and 230°C. DOW LDPE 150E Low Density Polyethylene Resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties. Note: DOW LDPE 150E Low Density Polyethylene Resin should comply with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - Consult the regulations for complete details Applications: - Heavy duty industrial film

DOW LDPE 303E Low Density Polyethylene Resin contains no slip or antiblock additives. DOW LDPE 303E Low Density Polyethylene Resin can readily be extruded using the blown film techniques utilising melt temperatures between 160 and 200 ° C. Main Characteristics: - Good draw down (30µm) - Good mechanical properties. - Good optics Applications: - Industrial and semiindustrial shrink films. - Heavy duty bags. - Construction films Complies with: - Canadian HPFB No Objection - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulation for complete details.

DOW LDPE 305E is a fractional melt index low density polyethylene resin designed for blown film extrusion where good optical properties and an excellent balance of physical properties is required. Main Characteristics: - High optical properties - Excellent tensile and tear strength - Excellent shrink properties Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 310E R is a fractional melt index low density polyethylene resin. DOW LDPE 310E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.