Lupolen 2427 F is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2427 H is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 2427 K is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3010 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3010 D exhibit a good shrinkage performance. Lupolen 3010 D provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 H PLUS is a non-additivated, low density polyethylene with high rigidity, good opticals and good chemical resistance. This grade is characterized by a very low gel level. Typical customer applications are lamination films or other higher value film applications where a very low gel content is required . It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3020 F exhibit a good shrinkage performance. Lupolen 3020F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 H is a non-additivated, low density polyethylene. It is characterized by a good balance between processability and mechanical properties. LyondellBasell customers report that films made from Lupolen 3020 H exhibit a glossy surface finish. Lupolen 3020 H provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3020 K is a non-additivated, low density polyethylene. It is characterized by a good processability. LyondellBasell customers report that films made from Lupolen 3020 K exhibit a glossy surface finish. Lupolen 3020 K provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 F is an additivated, low density polyethylene. It contains slip agent. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3026 F exhibit a good shrinkage performance. Lupolen 3026 F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 H is an additivated, low density polyethylene. It contains slip agent. It is characterized by a good balance between processability and mechanical properties. LyondellBasell customers report that films made from Lupolen 3026 H exhibit a glossy surface finish. Lupolen 3026 H provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3026 K is an additivated, low density polyethylene. It contains slip and anti-blocking agent.It is characterized by a good processability. LyondellBasell customers report that films made from Lupolen 3026 K exhibit a glossy surface finish. Lupolen 3026 K provides the option to produce films with very good optical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3220 F is a non-additivated, low density polyethylene. It is characterized by a good melt strength leading to a good bubble stability during blown film extrusion. LyondellBasell customers report that films made from Lupolen 3220 F exhibit a good shrinkage performance. Lupolen 3220 F provides the option to produce films with good optical and mechanical properties. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3420 J is a non-additivated, low density polyethylene. It is characterized by a good processability and high stiffness. LyondellBasell customers report that Lupolen 3420 J is used in label film and that films made from Lupolen 3420 J exhibit a glossy surface finish. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3426 J is an additivated, low density polyethylene. It contains slip and anti-blocking agent. It is characterized by a good processability and high stiffness. LyondellBasell customers report that Lupolen 3426 J is used in hygiene film and that films made from Lupolen 3426 J exhibit a glossy surface finish. It is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen GX 4087 is a low density polyethylene (LDPE), natural colour, without antioxidants and very low gel level for medium high voltage cable insulation. LyondellBasell quality system is designed to assure the high standards of cleanliness of Lupolen GX 4087. A dedicated production procedure is maintained and the product is tested by using online measurements. This grade is not intended for use in medical or pharmaceutical applications.

LUTENE FB0800 is mainly intended for the extrusion of blown film with high mechanical property for the manufacture of greenhouse film. LUTENE FB0800 have the excellent mechanical properties and optical properties make suitable for manufacture of greenhouse films. LUTENE FB0800 contains neither slip agent nor antiblock agent and antiblock agent for agricultural films . Applications: Large width film for greenhouse, Tunnel films.

Applications - Flexible package(tie layer or sealant layer of laminating film), Paper and paper board Description - LUTENE ® LB5000 is mainly intended for extrusion coating and can be processed with uniform thickness and width. - LUTENE ® LB5000 has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics. - LUTENE ® LB5000 contains no additives. - LUTENE ® LB5000 complies with U.S. FDA 21CFR 177.1520 C and Japanese Ministry of Health and Welfare Notification N.20 Standard.

Applications: - Flexible package(tie layer or sealant layer of laminating film), Paper and paper board Description: - LUTENE ® LB7000 is mainly intended for extrusion coating and can be processed at high speed with uniform thickness and width. - LUTENE ® LB7000 has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics. - LUTENE ® LB7000 contains no additives. - LUTENE ® LB7000 complies with U.S. FDA 21CFR 177.1520 C and EU Directive 2002/72 /EC and its amendments and hence Article 3 of European Regulation No. 1935/2004

Applications - Flexible package(tie layer or sealant layer of laminating film), Paper and paper board Description - LUTENE ® LB7500 is mainly intended for extrusion coating and can be processed at high speed with uniform thickness and width. - LUTENE ® LB7500 has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics. - LUTENE ® LB7500 contains no additives. - LUTENE ® LB7500 complies with U.S. FDA 21CFR 177.1520 C and Japanese Ministry of Health and Welfare Notification N.20 Standard.

Applications - Flexible package(tie layer or sealant layer of laminating film), Paper and paper board Description - LUTENE ® LB7500N is mainly intended for extrusion coating and can be processed at high speed with uniform thickness and width. - LUTENE ® LB7500N has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics. - LUTENE ® LB7500N contains no additives. - LUTENE ® LB7500N complies with U.S. FDA 21CFR 177.1520 C and EU Directive 2002/72 /EC and its amendments and hence Article 3 of European Regulation No. 1935/2004

Applications: - Especially high speed processing - Flexible package(tie layer or sealant layer of laminating film), Paper and paper board Description: - LUTENE ® LB9000G is mainly intended for extrusion coating and can be processed at high speed with uniform thickness and width. - LUTENE ® LB9000G has a good adhesion strength with Al-foil, polymer film, paper, paper board and other substrate and excellent neck-in characteristics. - LUTENE ® LB9000G contains no additives. - LUTENE ® LB9000G complies with U.S. FDA 21CFR 177.1520 C and EU Directive 2002/72 /EC and its amendments and hence Article 3 of European Regulation No. 1935/2004

Description The physical and structural characteristics of LUTENE MB9205 give it good flow properties and flexibility. Outstanding properties of LUTENE MB9205 are good productivity, clarity and surface gloss. Applications Lids of all sizes, Household articles, Powder Coating

Description The physical and structural characteristics of LUTENE MB9500 give it excellent flow properties. Outstanding properties of LUTENE MB9500 are good productivity, clarity and surface gloss. Applications Powder Coating, Household articles

Malen E FABS 23-D022 is designed for fine packaging films with thicknesses starting at 25 micons. The presence of anti-block and slip agent means extruded film may be used on automatic packaging systems. Films made out of Malen E FABS 23-D022 are notable for their high gloss and transparency. This product is not intended for use in medical and pharmaceutical applications.

The low melt flow index of this PE resin ensures that the products are highly resistant to impact and are exceptionally strong and durable. The excellent mechanical properties obtained in films made from Malen E FGAN 18-D003 make them ideal for production of transportation bags, shrink film for pallet packaging and many other applications. Malen E FGAN 18-D003 contains some anti-oxidant, which increases the polymer's resitance to degradation during processing and reduces its tendency to turn jelly. This product is not intended for use in medical and pharmaceutical applications.

Malen E FGNX 23-D006 is suitable for manufacture of highly transparent, very fine films, but also blow extrusion of small containers is possible . Extruded films starting with a thickness starting with 40 microns exhibit very good mechnical properties and are notable for their high transparency and gloss. This product is not intended for use in medical and pharmaceutical applications.

Malen E FGNX 23-D022 is suitable for manufacture of highly transparent, very fine films. ButBut also blow moulding or injection moulding is possibile due its rheological feature. Extruded films starting with a thickness of 25 microns exhibit very good mechnical properties and are notable for their high transparency and gloss. This product is not intended for use in medical and pharmaceutical applications.

This autoclave LDPE homopolymer is tailored for applications that require: - Excellent flexibility - Good flow - Good warpage resistance - Durability Typical injection molded applications for 1007 include: - Housewares - Tamper evident, snap-on caps - Wine bottle sleeve caps This resin meets these specifications: - ASTM D4976 - PE 113 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)

This autoclave LDPE homopolymer is tailored for applications that require: - Excellent flexibility - Excellent flow - Good warpage resistance - Durability Typical injection molded applications for 1009 include: - Large housewares - Tamper evident, snap-on caps - Feminine hygiene applications This resin meets these specifications: - ASTM D4976 - PE 112 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)

This low density polyethylene is tailored for extrusion coating applications that require: - Excellent processability - Low neck-in - High temperature extrusion stability Typical extrusion coating applications may include: - Laminations - Sealant resin - General paper and board coating - General flexible packaging

This low density polyethylene is tailored for extrusion coating applications that require: - Excellent processability - Low neck-in - High temperature extrusion stability Typical extrusion coating applications may include: - Laminations - Sealant resin - General paper and board coating - General flexible packaging

This low density polyethylene is tailored for extrusion coating applications that require: - Excellent processability - Very high line speed at low coating weights - Processability at lower extrusion temperature - High temperature extrusion stability - Excellent drawdown characteristics - Low neck-in Typical extrusion coating applications may include: - Food packaging - Laminations - Sealant resin - General paper and board coating - General flexible packaging

This low density polyethylene is tailored for film applications that require: - Easy processing - No additives - Good contact clarity Typical blown film applications include: - Liners - Trash bags - Masking films

This autoclave LDPE homopolymer is tailored for applications that require: - Excellent flexibility - Moderate flow - Moderate warpage resistance - Durability Typical injection molded applications for 1122B include: - Healthcare product closures - Charcoal lighter fluid closures - Champagne bottle stoppers This resin meets these specifications: - ASTM D4976 - PE 113 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)

This autoclave LDPE homopolymer is tailored for applications that require: - Good flexibility - Excellent flow - Excellent warpage resistance - Durability Typical injection molded applications for 1412 include: - Lids and overcaps with multi-level molds This resin meets these specifications: - ASTM D4976 - PE 111 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per 21 CFR 176.170(c)

This low density polyethylene is tailored for extrusion coating applications that require: - Excellent processability - Good WVTR - Good heat seal Typical extrusion coating applications may include: - Liquid packaging - Cup stock - Folding carton - General paper and board coating

This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require: - Good impact resistance - Excellent flexibility - Good clarity - Good gloss - No slip or antiblock Typical blow molded applications for 4538A include: - Pharmaceutical bottles - Squeeze bottles - Flexible toys Typical extrusion applications for 4538A include: - Wood-plastic composite component - Blends to improve friction values - Blends to enhance part flexibility - Adhesives This resin meets these specifications: - ASTM D4976 - PE 113 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c) - Listed in the Drug Master File

This low density polyethylene is tailored for cast film applications that require: - High speed extrusion - Low neck-in - Good drawdown - Edge tear resistance - High coefficient of friction Typical cast film resin applications include: - Personal care - General purpose

This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require: - Good impact resistance - Excellent flexibility - Good clarity - Good gloss - No slip or antiblock Typical blow molded applications for 5104 include: - Pharmaceutical bottles - Squeeze bottles - Flexible toys Typical extrusion applications for 5104 include: - Wood-plastic composite component - Blends to improve friction values - Blends to enhance part flexibility - Adhesives This resin meets these specifications: - ASTM D4976 - PE 113 - FDA 21 CFR 177.1520(c) 2.2, use conditions B through H per Table 2 of 21 CFR 176.170(c) - Listed in the Drug Master File

This low density polyethylene is tailored for blown film applications that require: - Easy processing - Low coefficient of friction - Good openability - Good sealability Typical blown film applications include: - Institutional packaging - Food packaging - Converter films