Applications: PETROTHENE NA963 is a series of resins formulated with special antiblock additive and designed for a wide variety of industrial film applications where high impact strength and excellent drawdown are needed. NA963 exhibits uniformity, ease of processing and good tensile strength. Regulatory Status: The basic resin NA963 meets the requirements of the Food and Drug Administration, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply. Contact your Equistar sales representative for further information regarding the suitability of specific products for specific applications.

Petrothene NA963083 is selected by customers for use in a wide variety of industrial film applications where high impact strength, excellent drawdown, and moderate shrinkage are needed. NA963083 exhibits good bubble stability, ease of processing, good tensile strength and good shrinkage.

Petrothene NA967000 is a low density polyethylene resin selected by customers for blow molding applications. NA967000 exhibits good processing characteristics and impact strength.

PETROTHENE NA 980 is designed specifically for the shrink packaging industry and has a balance of properties over a wide range of blow-up ratios. NA 980 is also recommended for bundling, pallet wrap and heavy-duty liner where clarity is important. Excellent bubble stability, melt strength, impact and shrinkage make NA 980 an outstanding polymer for all these demanding applications.

Petrothene NA980000 is a low density homopolymer resin selected by customers for use in shrink packaging, bundling, pallet wrap and heavy-duty liner applications. Excellent bubble stability, melt strength, impact and shrinkage are key attributes of NA980000.

Petrothene NA983085 is a low density homopolymer resin selected by customers for use in shrink packaging, bundling, pallet wrap and heavy-duty liner applications. Excellent bubble stability, melt strength, impact and shrinkage are key attributes of NA983085.

PETROTHENE NA 985 is a series of ethylene vinyl acetate copolymer resins designed for heavy-duty applications produced by blown film extrusion. The NA 985 series exhibits high impact strength and good heat seal characteristics.

Pharmalene FC 20 PH BA is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH BA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses. Sustainability The "bio attributed" product Pharmalene FC 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FC 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FC 20 PH BA is a low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrustion, extrustion, and extrusion, blown moulding. The production of Pharmalene FC 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene FC 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FC 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH BCA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses. Sustainability The product Pharmalene FC 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FC 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FC 20 PH BCA is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene FC 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FC 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FC 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrusion, extrusion and extrusion blow moulding. Main Applications Pharmalene FC 20 PH is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses.

Pharmalene FL 20 PH BA is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH BA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles. Sustainability The "bio attributed" product Pharmalene FL 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 20 PH BA is a low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrustion, extrustion, and extrusion, blown moulding. The production of Pharmalene FL 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene FL 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH BCA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles. Sustainability The product Pharmalene FL 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 20 PH BCA is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene FL 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for blown film extrusion, extrusion and extrusion blow moulding. Main Applications Pharmalene FL 20 PH is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles.

Pharmalene MP 20 PH BA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. The production of Pharmalene MP 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BCA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene MP 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH is a medium fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. Main Application Pharmalene MP 20 PH is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures.

Pharmalene MP 30 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 30 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 30 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BCA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 30 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 30 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH is a medium fluidity homopolymer low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 30 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MP 31 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BA is suitable for the production of syringes and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 31 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BA is a medium fluidity low density polyethylene (LDPE) addivated with slip agent and anti-block obtained by high pressure autoclave process.. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 31 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BCA is suitable for the production of syringes and caps & closures. Sustainability The product Pharmalene MP 31 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BCA is a medium fluidity low density polyethylene (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 31 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH is a medium fluidity low density polyethylene resin (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 31 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH is suitable for the production of syringes and caps & closures.

Pharmalene MR 10 PH BA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MR 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MR 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MR 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MR 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MR 10 PH is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MT 10 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MT 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MT 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MT 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MT 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MT 10 PH is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Plexar tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, EVA, EMA, polypropylene, polyamide (nylon), ethylene vinyl alcohol copolymers (EVOH), ionomer and other sealants, polyethylene terephthalate (PET) resins and copolymers, styrenic polymers, metal, and paperboard. Product grades primarily used for blown and cast films, sheet and thermoforming, blow molding, extrusion coating and lamination, tubing, pipe, and other specialty applications are available in pellet form. Contact your Plexar sales and/or Equistar technical service representative for more information and specific recommendations for your application(s).

Plexar tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, such as EVA or EMA, polypropylene, polyamide (nylon), ethylene vinyl alcohol copolymers (EVOH), ionomer and other sealants, polyethylene terephthalate (PET) resins and copolymers, styrenic polymers, metal, paper and many others. Product grades tailored for blown and cast films, sheet and thermoforming, blow molding, extrusion coating and lamination, tubing, pipe, spray coating and other specialty applications are available in pellet form. Contact your Plexar sales and/or Equistar technical service representative for more information and specific recommendations for your application(s).