Polifil ® RP-LDPE is a soft, tough material with good clarity and high chemical resistance. LDPE remains flexible and retains impact strength at very low temperatures. High melt flow (low viscosity) grades are injection molded into products such as containers and lids. Low melt flow (high viscosity) grades are used in blown films for bags and construction, extruded sheeting and pipe, and blow molded containers such as squeeze bottles. Linear Low Density (LLDPE) resins exhibit higher strength and stiffness than traditional LDPE resins for many of these same applications.

This product is formulated using a high heat stability calcium carbonate and was designed for com- patibility with a wide variety of extrusion coating resins. It will improve line speeds, print quality, and enhance the poly to substrate adhesion. Suitable Applications: extrusion coating Environmentally Beneficial Calcium carbonate is a plentiful, natural mineral and can be used to effectively displace a significant portion of the petrochemical based component in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product. Regulatory Compliance The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

Polycomp 6602 HS Natural is a low-density polyethylene compound. It has been formulated to meet the requirements of AS 1049.1 Type 1 Category 5 and AS/NZS 3808 Table 10 Criteria 2, however the end user should satisfy themselves of full compliance against these standards. It has exceptional toughness and provides excellent heat aging performance and outstanding enviromnental stress-cracking performance.

POLYDEF Ag+ LDPE is a concentrated masterbatch formulated from silver nanoparticles (Ag) designed for PE and PP-based plastics that adds bactericidal properties to the finished polymer elements. The presence of nanosilver in the protected polymer ensures a biocidal effect by inhibiting the metabolic pathways of microorganisms, contributing to the elimination of sources of unpleasant smells and the extension of the lifetime of the material. The additive is environmentally friendly, does not affect the physical properties of the polymers and does not cause degradation of the protected material. The component provides long-lasting microbiological protection (microbiological efficacy of = 99.98%), as well as enhances the safety and attractiveness of the product. The nano additive is also very stable at high temperatures and in high humidity compared to traditionally used biocides.

PE-LD150 are use in a broad range of specialty applications. PE-LD150 powders combine the unique properties of a polyolefin resin with a small particle size.

PE-LD150F are use in a broad range of specialty applications. PE-LD150F powders combine the unique properties of a polyolefin resin with a small particle size.

Low Density Polyethylene – Blown Film Additive Package = Barefoot

Low Density Polyethylene – Blown Film Additive Package = Slip & Antiblock

Low Density Polyethylene – Blown Film Additive Package = Antiblock

Low Density Polyethylene – Blown Film Additive Package – Barefoot

Low Density Polyethylene – Blown Film Additive Package = Slip & Antiblock

Low Density Polyethylene – Blown Film Additive Package = Antiblock

Low Density Polyethylene – Injection - Lid / Caps

Low Density Polyethylene – Clarity Film Additive Package = Barefoot

Low Density Polyethylene – Cast Film / Liners / General Purpose Packaging Additive Package = Barefoot

Low Density Polyethylene – Cast Film / Liners / General Purpose Packaging Additive Package = Slip and Antiblock

Low Density Polyethylene – Cast Film / Liners / General Purpose Packaging Additive Package = Antiblock

Low Density Polyethylene – Extrusion / Injection - Housewares / Caps & Closures / Coatings

GE310PL is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite panel manufacturing system. GE310PL has high physical properties originated from LDPE and shows excellent adhesion strength and processibility.

POLYMER-E ® C4300 is specially developed for extrusion coating grade LDPE, posessing good adhesion to various substrates such as papers as well as nonporous aluminum foil substrates. POLYMER-E ® C4300 can be used in high line speed coating by excellent processibility and flowability.In addition with low vapor transmission and excellent heat sealing properties, it is a excellent coating material. Applications - Extrusion coating - Lamination

POLYMER-E ® C7100 is specially developed for extrusion coating grade LDPE, posessing good adhesion to various substrates such as papers as well as nonporous aluminum foil substrates. POLYMER-E ® C7100 can be used in high line speed coating by excellent processibility and flowability. In addition with low vapor transmission and excellent heat sealing properties, it is a excellent coating material. Applications - Extrusion coating - Lamination

POLYMER-E® F1100 (LDPE) possesses low melt index and good toughness especially suitable for package of shopping bags, cold bags, zipper bags and shrink packaging films applications. Polymer-E® ®® F1100 is also suitably used for extrusion to produce squeezable tube. Applications - Blown film - Extruded tubes

POLYMER-E® F2200 (LDPE) possesses low melt index and good toughness especially suitable for films with thickness of 0.025~0.06 mm. The said films are for package of shopping bags, cold bags, zipper bags and shrink packaging applications. Polymer-E® F2200 is also suitably used for extrusion to produce squeezable tube. Applications - Blown film - Extruded tubes

POLYMER-E ® F2201 (LDPE) possesses low melt index and good toughness especially suitable for films with thickness of 0.025~0.06 mm. The said films are for package of shopping bags, cold bags, zipper bags and shrink packaging applications. POLYMER-E ® F2201 is formulated with medium slip to give good openability of film. High gloss and low haze characteristics of blown film provide attractive appearance to the packaged goods thus more valuable. Applications - Blown film - Package film

POLYMER-E ® F8201 is a low density polyethylene resin with high melt index suitable for extrusion molding. Owing to its excellent flowability, POLYMER-E® F8201 is suitable for films or bags with thickness of 0.010~0.040 mm for package of suit, bakery, fruit, vegetable, fish, meat, and grocery. Bags with the thickness of 0.030 mm are the most popular used. POLYMER-E® F8201 is well formulated with slip and anti-block agents, bags made from these are easy to open and with outstanding gloss. This makes goods more attractive to customers. Thin films made from POLYMER-E® F8201 still possess good stiffness, but less strength. Such thin bags are recommended for packaging of goods weighing less than 2 kilograms. Applications - Blown film - Package film

Polymer-E H0100 possess low melt index and good toughness especially suitable for films with thickness of 0.03~0.08 mm. The said films are for package of shopping bags, detergent powder bags, garbage bags, food bags, frozen bags, liner of woven sacks, wooden toy bags, re-closable bags and shrink packaging applications. The toughness of film extruded fromPolymer-E H0100 permits its use for packaging up to about 10kg load. Polymer-E H0100 is also suitably used for extrusion to produce squeezable tube. Applications - Blown film - Extruded tubes

Polymer-E H0105 possess low melt index and good toughness especially suitable for films with thickness of 0.03~0.08 mm. The said films are for package of shopping bags, detergent powder bags, garbage bags, food bags, frozen bags, liner of woven sacks, wooden toy bags, re-closable bags and shrink packaging applications. The toughness of film extruded from Polymer-E H0105 permits its use for packaging up to about 10kg load. Polymer-E H0105 give easy openability of film, with attractive appearance to the packaged goods thus more valuable. Polymer-E H0105 is also suitably used for extrusion to produce squeezable tube. Applications - Blown film - Heavy duty bag

POLYMER-E ® M2100 having excellent melt flow characteristic, high gloss, is especially used for injection molding applications such as housewares, toys, etc. POLYMER-E ® M2100 can also be ground into powder for coating. Applications - Injection molding - Powder coating

POLYMER-E ® M5100 is a low density polyethylene resin of high melt index, excellent melt flow and good flexibility, which is suitable for injection molding of artificial flowers, foliages and intricate articles and soft bottles and can lids. POLYMER-E ® M5100 can be easily pigmented to any color by either dry blending or melt blending of the pigment into the resin which makes the products appear genuine and attractive. Or dry blending with Nylon/PET to produce microfiber. Applications - Injection molding - Microfiber - Powder coating