CONTINUUM™ DGDA-2420 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with a UV stabilizer for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, irrigation and drip tube. Industrial Standards Compliance: - ASTM D 3350: cell classification PE277370D - ISO PE 80 pipe grade - ASTM PE 2708 pipe grade - 1250 psi HDB @ 73F, 800 psi HDS at 73F, and 1000 psi HDB at 140F Consult the regulations for complete details.

CONTINUUM™ DGDA-2420 YL2 Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with UV stabilizers for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes. Industrial Standards Compliance: - ASTM D 3350: cell classification: -- Natural - PE277370D -- Yellow - PE277373E (Note A) - NSF International: Standard 14 - Canadian Standards Association (CSA): B137.4 - PE2708 PLUS - Plastics Pipe Institute (PPI): -- ASTM PE 2708 pipe grade - 1250 psi HDB at 73°F, 800 psi HDS at 73°F, and 1000 psi HDB at 140°F NOTES: (A) The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on yellow resin. (natural resin plus 2.0% DFDA 0022 YL2).

DOW™ DGDA-5310 GMB is a Medium Density Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment complying extensively with the requirements of GM13. Utilizing the highest density MDPE allows gives DGDA-5310 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its medium density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes. Principle Characteristics: - Resin designed for geomembranes - Excellent processability in high thickness - Excellent ESCR and oxidation resistance - Meets GM Standard 13

MDPE 8818 is a 1-hexene copolymer medium density resin. Exhibits good processability, excellent stress cracking resistance (ESCR), impact resistant and good performance at low temperatures. The long term hydrostatic strength (LTHS) at 20°C is greater than 8 MPa, classifies as PE80 according to ISO 9080. ASTM D3350 cell classification: 235473A. Standard designation code: PE2706 Main applications include pipes for water distribution, irrigation, effluents; ducts for telecommunications; geomembranes; telephone cable shells, drop wires.

DOW DMDA-8962 NT 7 Medium Density Polyethylene (MDPE) resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. Main Characteristics: - Injection molding resin - Good impact/stiffness balance for freezer applications - High flow for processing ease - Very narrow molecular weight distribution Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - Consult the regulations for complete details.

- High melt strength - Excellent low temperature toughness - Good environmental stress crack resistance - Excellent flex life Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOW DNDA-1796 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications. It also has utility in certain sheet applications and blow molding applications such as small, squeezable bottles. It exhibits high melt strength, excellent low temperature toughness, good stress cracking resistance, and outstanding flex life. It has a high molecular weight and a relatively broad molecular weight distribution that provides an excellent balance of performance properties and processability.

- High melt strength - Excellent low temperature toughness Industrial Standards Compliance: - ASTM D 3350: cell classification PE224340A - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Complies Europe Commission Regulation (EU) No 10/2011 (See NOTES) - Consult the regulations for complete details. DOW DNDA-7350 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications as well as blow molded articles. It exhibits high melt strength and excellent low temperature toughness.

DOW™ DPDA-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - EU, 10/2011 - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3152 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3152 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories, Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) Consult the regulations for complete details.

DOW™ DPDA-3170 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding and is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: DOW DPDA-3170 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles - Excellent impact strength, stress crack resistance and processability - Long term UV stabilization: UV-8 stabilizer package Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - Underwriters Laboratories Inc. - NSF International NSF/ANSI Std 61 (sec 4 & 5) - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

DOW™ DPDA-3020 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details

MDPE NG 7525 is a Medium Density Polyethylene Resin produced in the UNIPOL™ Process. This resin is recommended to be used in thin-wall micro-irrigation tape application and profile extrusion application. Resin exhibits good draw down characteristics producing tapes with a reliable balance of extrusion and stiffness. It can also be used as a component in mixtures with low density polyethylene resins and linear low density polyethylene resins, to modify and improve the mechanical properties. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Main Characteristics: - High performance in processability - Excellent mechanical properties - High ESCR - Excellent seal property in drippers - Complies with Regulation U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with EU, No 10/2011 - Consult the regulation for complete details

MPDE NG 6995 is a Medium Density Polyethylene Resin produced in the Gas Phase technology. It is designed for blown film applications providing good processability and seal properties. It offers good tear and impact resistance. Main Characteristics: - Monolayer and multilayer blown film - General purpose bags Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulation for complete details.

XDPDA-3020 NT 7 Experimental Medium Density Polyethylene (MDPE) Resin is produced via UNIPOLTM Process Technology from Dow and is intended for use in a broad range of injection molding applications such as household or commercial trash bins, storage units (totes, bins and laundry baskets) and large carts. This resin has been designed to provide an excellent balance of toughness, tear resistance and processability. · Injection Molding · For injection molded household or commercial trash bins, storage units (totes, bins and baskets) and large carts · Excellent balance of toughness, tear resistance and processability Complies with: · U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details

DriscoPlex® 6500 Series Pipe and Fittings meet or exceed: - ASTM D2513, D2683, D3261 - CAN/CSA-B137.4 - UPC - ASTM D3350, cell classificationPE234373E and PE234375E - PPI TR-4 designations PE2708 and PE80 DriscoPlex® 6500 Series Pipe and Fittings for: - Natural Gas Distribution, LPG and Propane Gas Distribution, Yard Gas - Iron Pipe Size OD (IPS) ½" to 12" - Copper Tube Size OD (CTS) ½" to 1¼"

Egyeuropten HX 3405 U is a Medium Density Polyethylene powder, hexene copolymer designed for Rotational molded items: Chemical tanks, Storage containers and General UV stabilized rotomoulding applications. It is characterized by a narrow molecular weight distribution, high mechanical and chemical properties..

HD 3840 UA is an UV virgin medium density polyethylene copolymer grade with a narrow molecular weight distribution supplied in a pellet form.

HPG00340 Medium Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) offers medium molecular weight material with broad molecular weight distribution. As a copolymer it combines high impact and excellent environmental stress crack resistance, therefore specially suitable for the production of pipe for water supply irrigation, sewage and industrial effluent It can be easily processed on normal polyethylene pipe extrusion machine.

NGL045RG Medium Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) designed for Rotational Moulding application. As a copolymer it combines good toughness, impact resistance and excellent environmental stress crack resistance due to medium density of the resin and is therefore specially suitable for the producing chemical tanks, water storage tanks, milk cans and technical hollow articles. It can be easily processed on normal polyethylene roto moulding machines.

NGL045RU Medium Density Polyethylene Resin manufactured by IEPL using "SCLAIRTECH" solution polymerisation process of DU Pont, Canada (Now Nova Chemicals) designed for Rotational Moulding application. As a copolymer it combines good toughness, impact resistance and excellent environmental stress crack resistance due to UV Stabiliser & medium density of the resin and is therefore specially suitable for the producing chemical tanks, water storage tanks, milk cans and technical hollow articles.

Eltex® A4040 is a medium-density polyethylene supplied as non pigmented natural pellet for the production of PE-Xb compounds using two-step process or for the manufacture of PEX pipes using a single-step process. Characteristics: - Natural polyethylene for silane PE-Xb processes Applications: - Hot and cold water - All classes of application in accordance with EN ISO15875 and ISO10508

Eltex® PC 002-50 R968 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipes for water applications. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: - PE 80 Blue pipe compound Applications: - Water

Eltex® TUB 171 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipes. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: - PE 80 Black pipe compound Applications: - Gas - Water - Industrial

Eltex® TUB 172 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipe for gas applications. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: - PE 80 Yellow pipe compound Application: - Gas

EPOLENE ® EE-2 is a medium density, oxidized low molecular weight polymer used in emulsifiable applications. It is an excellent asphalt modifier which mixes readily with all asphalts. Attributes: - Oxidized to provide functionality - Useful lubricant for HDPE extrusion - Oxidized low density polyethylene - Easily dispersed in asphalt blends using low shear mixing - Compatible with other asphalt modifiers Applications: - Asphalt modification - Emulsions - Wax modification

EPOLENE® N-21 is a non-emulsifiable medium density polyethylene that improves slump resistance in cable filling and flooding, provides lubricity in printing inks, and modifies viscosity in hot melt adhesives. Its higher melting point and hardness, compared to other EPOLENE® N type polymers, provides improved resistance to solvents and oils. Attributes: - Higher melt point and hardness provides improved resistance to solvents / oils - Improved slump resistance in cable filling and flooding - Provides lubricity in printing inks - Useful as a viscosity modifier in hot melt adhesives - Medium density polyethylene Applications: - Asphalt modification - Hot melt adhesives - Compounding - Solvent based coatings - Wax modification - Wire and cable

EPOLENE ® N-21P is a non-emulsifiable medium density polyethylene powder that improves slump resistance in cable filling and flooding, provides lubricity in printing inks, and as a viscosity modifier in hot melt adhesives. Its higher melting point and hardness, compared to other EPOLENE ® N type polymers, provides improved resistance to solvents and oils. Attributes: - Powdered Product Form - Higher melt point and hardness provides improved resistance to solvents / oils - Improved slump resistance in cable filling and flooding - Provides lubricity in printing inks - Useful as a viscosity modifier in hot melt adhesives - Medium density polyethylene powder Applications: - Asphalt modification - Compounding - Solvent based coatings - Wax modification - Wire and cable

Solid and expandable Polyethelene based compounds for production of insulation, dielectric or black sheathing. Products with very high purity and quality consistency to overcome the limits of similar products available on the market.

ETILINAS BPD 4028 is a natural MDPE compound designed specifically for colourable (non black) communication and power cable jacketing. It can be coloured by means of a high quality colour masterbach intended for wire and cable applications. ETILINAS BPD 4028 does not contain UV stabilisation and so cables jacketed with this material must be protected from direct sunlight both in storage and in subsequent installation.

ETILINAS BPD 4038 is designed specifically for the jacketing of communication and power cables. It is based on a special high density copolymer with high environmental stress cracking resistance, abrasion resistance, weather resistance and thermal stability. It meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: IEC 708: IEC 6052, ST7; IEC 840; ASTM D1248, Type II, Class C, 5, Grade W6; BS 6234; 03C, TS2.

ETILINAS HD3840UA is a ultra-violet (UV) light stabilised linear medium density polyethylene grade with a narrow molecular weight distribution, supplied in pellet form for use as a rotational moulding grade. Characteristics include: good impact strength, excellent external and internal surface finish, and is UV stabilized. Applications include: rotational moulded items, and injection moulded technical parts and closures.

ETILINAS MD20BK is designed specifically for the manufacture of pipe and pipe fittings for use in potable water, gas and other high performance pressure pipeline systems. ETILINAS MD20BK is based on a special medium density copolymer with exceptionally high resistance to environmental stress cracking and meets the ISO classification PE80 for pipe materials.

ETILINAS MD20YW is designed specifically for the manufacture of pressure pipe and pipe fittings for use in gas distribution systems. ETILINAS MD20YW is based on a special non-cadmium yellow pigmented medium density copolymer with exceptionally high resistance to environmental stress cracking and meets the ISO classificationPE80 for pipe materials.

ETILINAS PC4020 is designed specifically for coating/cladding of metal pipes and tubes. ETILINAS PC4020 is based on a special medium dencity copolymer with exceptionally high resistance to environmental stress cracking and contains suitable additives necessary for ease of coating manufacture and to ensure long term weathering resistance.

FINGERPRINT™ DFDA-7555 NT is a medium density bimodal polyethylene resin produced using Unipol™II process technology. It is intended for use in thin-wall micro irrigation tape applications and profile extrusion applications. DFDA-7555 NT exhibits good draw down characteristics producing tape with a reliable balance of extrusion ease and toughness. It also has utility as a blending component to modify and improve the physical properties of high pressure, very low density, linear low density, or high density polyethylene resins and post industrial resins. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Dow DFNF-0092 carbon black masterbatch at a 6.5% concentration has been found to offer suitable UV resistance. Main Characteristics: - High tensile properties - High elongation properties - Excellent burst strength Slip Additive: none Antiblock Additive: none Industrial Standards Compliance: - ASTM D 3350: cell classification PE335440A