FINGERPRINT™ DFDC-7525 NT is a medium density polyethylene resin produced using Unipol™ process technology. It is intended for use in thin-wall micro irrigation tape applications and profile extrusion applications. DFDC-7525 NT exhibits good draw down characteristics producing tape with a reliable balance of extrusion ease and toughness. It also has utility as a blending component to modify and improve the physical properties of high pressure, very low density, linear low density, or high density polyethylene resins. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure. Dow DFNF-0092 carbon black masterbatch at a 6.5% concentration has been found to offer suitable UV resistance. Main Characteristics: - High tensile properties - High elongation properties - Excellent burst strength Slip Additive: none Antiblock Additive: none Industrial Standards Compliance: - ASTM D 3350: cell classification PE234510A

FINGERPRINT™ DFDD-7525 NT is a medium density polyethylene resin designed for use in thin-wall microirrigation tape applications. This product was designed to offer good profile extrusion processing characteristics coupled with great application performance attributes such as toughness, burst strength and environmental stress crack resistance. Main Characteristics: - High tensile strength - High burst strength - High environmental stress crack resistance Industrial Standards Compliance: - ASTM D 3350: cell classification PE234510A

Formolene ® HL3721 is a high molecular weight hexene copolymer resin tailored specifically for cast extrusion production of geomembrane films. The resin provides an excellent balance of ESCR properties, broad fusion range, excellent melt strength and good overall processability. Suggested Applications: - Landfill Liners - Gasoline and Chemical Tank Containment Liners - Tunnel Moisture Barriers - Mine Tailing Collection Projects

Formolene® HL3812 is a high molecular weight hexene copolymer resin that is tailored specifically for geomembrane applications. The resin provides an excellent balance of ESCR properties, broad fusion range, excellent melt strength and good overall processability.

Formolene® HP3902 is a high performance hexene copolymer designed for natural gas piping systems. It has outstanding slow crack growth resistance and good long-term hoop strength. It contains a UV stabilizer. Formolene ® HP3902 meets all requirements of ASTM D4976 - PE 225 When blended with the approved yellow color concentrates, Formolene® HP3902 meets: - A Cell class of 234373E and 234375E per ASTM D3350 - The Plastic Pipe Institute (PPI) Certification of a PE2708 and PE80 resin per the protocol in TR-3 - The Canadian Standards Association CSA-B137.4 Standard for polyethylene piping systems for gas service - The National Sanitation Foundation (NSF) Standard 14 for plastic piping systems components and materials Suggested Applications: - Gas Distribution Pipe - Oilfield and Other Industrial Piping Systems

This data represents typical values that have been calculated from all products classified as: Generic MDPE This information is provided for comparative purposes only.

CMBA-8240BK is a black medium density polyethylene (MDPE) compound designed for power & communication cable jacketing applications. It combines excellent physical properties with good processing. It provides excellent resistance to environmental stress cracking (ESCR) and thermal oxidative degradation. It contains 2.5% well-dispersed carbon black to ensure excellent weathering resistance. CMBA-8240BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ASTM D1248 Type II, Class C, Category 5, Grade J4, E8, E9 - BS 6234: Type H03C, TS2 - IEC 60502, ST3, ST7 - IEC 60840, ST3, ST7 - ISO 1872-PE, KCHL, 33 D-006 - NF C32-060 Applications CMBA-8240BK can be used for jacketing of power and communication cables.

MDPE for rotational molding Application Rotational molding, Medium/large container, Tank, Outdoor structure Characteristics Excellent processability, High impact strength, UV stability, Stress-cracking resistance

MDPE for rotational molding Application Rotational molding, Medium/large container, Tank, Outdoor structure Characteristics Excellent processability, High impact strength, UV stability, Stress-cracking resistance

MDPE for rotational molding Application Rotational molding, Medium/large container, Tank, Outdoor structure Characteristics Excellent processability, High impact strength, UV stability, Stress-cracking resistance

MDPE for rotational molding Application Rotational molding, Medium/large container, Tank, Outdoor structure Characteristics Excellent processability, High impact strength, UV stability, Stress-cracking resistance

HIPLEX® TR-418 blue is medium density polyethylene, high molecular weight, specially designed for pressure pipe manufacture. This blue compound combines easy processing with very good mechanical properties, an excellent resistance to UV radiation and thermal ageing, and very high environmental stress cracking resistance, which gives pipes and fittings a maximum useful life. HIPLEX® TR-418 blue is recommended for pipe extrusion and injection moulding of fittings, especially high-pressure pipe systems such as potable water pipes, industrial pipes etc. HIPLEX TR-418 blue is classified as an MRS 8 material. It confirms different national and international standards such as ISO 4427, ISO 4437, EN 1555 and EN 12201.

HIPLEX® TR-418 yellow is medium density polyethylene, high molecular weight, specially designed for pressure pipe manufacture. This yellow compound combines easy processing with very good mechanical properties, an excellent resistance to UV radiation and thermal ageing, and very high environmental stress cracking resistance, which gives pipes and fittings a maximum useful life. HIPLEX® TR-418 yellow is recommended for pipe extrusion and injection moulding of fittings, especially high-pressure pipes for gas distribution systems. HIPLEX TR-418 yellow is classified under ISO TR 9080 MRS classification as PE 80.

ICORENE® 1460 GRN 6908 is a hexene medium density polyethylene compound green colour specifically developed for use in rotational moulding. This grade is designed for use in agriculture and chemical storage containers, technical parts and automotive parts. Also this grade is resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 GRN 6908 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures).

ICORENE® 1460 GRY 7907 is a hexene medium density polyethylene compound grey colour specifically developed for use in rotational moulding. This grade is designed for use in agriculture and chemical storage containers, technical parts and automotive parts. Also this grade is resistant against the harmful effect of biodiesel fuel. ICORENE® 1460 GRY7907 has good overall mouldability, extremely high ESCR and impact strength (especially at low temperatures).

ICORENE® 3855 is a hexene medium density polyethylene with outstanding processability, specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.

ICORENE® 5704 is a metallocene medium density polyethylene specifically developed for rotational moulding. This grade is a suitable grade for use in kayaks and boats applications. It has a good balance of properties such as toughness easy flow and stiffness.

K38-20-160 is a yellow, UV-stabilized medium density polyethylene copolymer, containing an organic pigment system, designed specifically for natural gas pipe and fittings. Exhibiting excellent long term strength and slow crack growth resistance, K38-20-160 is listed by the Plastics Pipe Institute (in PPI TR-4) as a PE2708 and is certified to the material requirements of ASTM D2513 and CSA B137.4.

K38-20-188 is a natural, UV-stabilized medium density polyethylene pipe and tubing resin designed for natural gas distribution. When blended with an approved INEOS yellow masterbatch, the resulting formulation, known as K38-20-160, is recognized by the Plastics Pipe Institute as a PE2708 resin which exhibits excellent long term strength and outstanding environmental stress crack resistance and is certified to the material requirements of ASTM D2513 and CSA B137.4.

Cables using LD 1333 and manufactured under sound commercial fabrication conditions meet the following specifications: AS 1049-1986 Type 03S ASTM D1248, II A5, Grade E5 REA PE200, Appendix A US Federal LP-390C II-L, Grade III, Category 5 US Western Electric Co. MS 58411 BS 6234-1987 Type 03

This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992). This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130.

This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130. This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).

This product has been designed to meet the requirements for PE 80 Type B compounds under AS 4131, and is intended to be used in pipes conforming to AS 4130. This resin is manufactured to conform to the requirements for unrestricted food contact of AS 2070 Part 1 (1992).

This high performance medium density polyethylene is an ethylene-hexene copolymer that is tailored for demanding pressure pipe applications that require: - Good long-term hoop strength - UV stabilizer for good outdoor storage life - Outstanding resistance to slow-crack growth Typical applications for KM 293-TR include: - Energy piping systems - Oil field pipe - Industrial pipe When blended with an approved yellow concentrate, this material meets or exceeds: - ASTM D4976 - PE 225 - NSF 3 rd party D2513 certified - ASTM D3350, Cell Class PE234373E and PE234375E - PPI designations PE 2708 and PE 80 - CSA approved for natural gas

KM-A632sPF is an Octene Copolymer sMDPE resin used for applications such as cast film, co-extrusion and lamination. This grade contains an enhanced processing antioxidant. KM-A632sPF exhibits excellent tensile and elongation properties, good optical properties and low gel.

KM-U0470-RT is a hexane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows good impact properties and excellent processability. Applications: Lightweight Parts, toys, complex custom parts, home and gardening items, mailboxes

KM-U-143sMR is an octane copolymer MDPE Rotational Molding Resin that contains processing antioxidant and a UV stabilizer. This grade shows exceptional low temperature impact properties, low viscosity, and easy mold release. Applications: Recreational and leisure equipment, containers, septic tanks, and fish boxes

This natural high molecular weight hexene copolymer provides: - Excellent processability - Exceptional melt strength - Excellent stress cracking resistance Typical applications include: - PE 80 pressure pipe & fitting described in ISO standards, such as ISO 4427 - PE - Al - PE composite pipe and geomembrane This resin meets these specifications: - FDA Regulation 21CFR 177.1520. Suitable for food packaging - Listed in PPI’s TR - 4 as a PE 80 material

This medium density, high molecular weight, hexene copolymer is tailored for geomembrane applications that require: - Outstanding ESCR - Broad fusion range - Excellent melt strength - Good processability Typical applications include: - Landfill liners - Gasoline and chemical tank containment liners - Tunnel moisture barriers - Mine tailing collection projects This resin meets these specifications: - ASTM D4976 – PE225 - GRI-GM13 except carbon black requirements - FDA 21 CFR 177.1520(c) 3.1a, use conditions C through G per 21 CFR 176.170(c). Volume of food contacting article must be equal to or greater than 5 gallons.

This high molecular weight hexene copolymer provide: - Excellent overall balance of toughness - Good impact strength and tear properties It is ideal for fabricating into: - Produce bags - Shopping bags - Trash bags This resin meets these specifications: - FDA Regulation 21CFR 177.1520. Suitable for food packaging. - Suitable for food packaging

This high molecular weight, hexene copolymer is tailored for geomembrane and pressure pipe application that require: - Outstanding ESCR - Excellent melt strength - Good processability - Broad fusion range Typical applications for HHM TR400- include: - Smooth and textured geomebrane - Pressure Pipe This resin meets these specifications: - FDA Regulation 21CFR 177.1520 - ASTM D4976 - PE 225

Luban DNDC-7150 Medium Density Polyethylene (MDPE) grade is a hexene copolymer with narrow molecular weight distribution. This grade is intended for use in rotational molding applications such as outdoor storage containers. The grade is UV stabilized. Application Roto-molded loft tanks (water), agriculture tanks, industrials pallets, trash containers, chemical shipping drums, water park slides

Luban DNDC-7152 Medium Density Polyethylene (MDPE) grade is a hexene copolymer with narrow molecular weight distribution. This grade is intended for use in rotational molding applications such as indoor storage containers. Application Roto-molded loft tanks (water), agriculture tanks, industrials pallets, trash containers, chemical shipping drums, water park slides

Luflexen hyPE 35P FA is a high performance, linear polyethylene grade with medium density and hexene as comonomer. This product combines outstanding impact resistance with an excellent stiffness and offers good processability in a broad processing window. LyondellBasell customers report that Luflexen hyPE 35P FA is used in high performance films where high strength and puncture resistance is required. It contains antioxidants and is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 3621 M RM is a new generation hexene linear medium-density polyethylene for rotational molding. Typical customer applications include agricultural and chemical storage containers, technical parts and automotive parts. This product exhibits excellent ESCR and high impact strength at low temperatures. Lupolen 3621 M RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology

Lupolen 3721 C is a medium density polyethylene with hexene as comonomer. It exhibits a good processability and is used in stiff films and as blending component for LDPE. It contains antioxidants and is delivered in pellet form. This product is not intended for use in medical and pharmaceutical applications.

Lupolen 4021 K RM is a new generation hexene linear medium-density polyethylene for rotomolding. Typical customer applications include large tanks including agricultural and chemical storage containers and underground and infrastructure applications. Lupolen 4021 K RM is a fully UV-stabilized and pelletized polymer. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology

Lupolen GX 5007 is a new generation hexene linear medium density polyethylene for rotational molding. Lupolen GX 5007 is a fully UV-stabilized and pelletized polymer. It is not intended for use in medical and pharmaceutical applications.

This medium density polyethylene is an ethylene-hexene copolymer and is tailored for blown film applications that require: - Good stiffness - Excellent toughness - Blending with LLDPE and LDPE - Superior bubble stability Typical blown film applications include: - Retail bags - Industrial liners - Mailer bags - Blend component