DOWLEX™ TG 2085B is a Linear Low Density Polyethylene, copolymer octene, produced in the Solution Process. This resin presents an excelent balance of optical and mechanical properties. It offers downgauging, increases in productivity and packing speed. Main Characteristics: - For high speed, thin film applications - Additional thermal stability Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - Consult the regulations for complete details.

- Used in Industrial, Food and Specialty Packaging - Better optics and processability - Good seal performance - This resin contains slip and antiblock additives - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

Polyethylene Resin 1210P is a butene Linear Low Density Polyethylene for general blown extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability - Good sealing performance Complies with: - U.S. FDA 21 177.1520 (c) 3.2a . - EU. No 10/2011 - Consult the regulations for complete details.

- Used in Industrial, Food and Specialty Packaging - Better optics and processability - Good seal performance - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

Polyethylene 1211P is a butene Linear Low Density Polyethylene for general blown film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability - Good sealing performance Complies with: - U.S. FDA 21 177.1520 (c) 3.2a - EU. No 10/2011 - Consult the regulations for complete details.

- Used in Industrial, Food and Specialty Packaging - Better optics and processability - Good seal performance - This resin contains slip and antiblock additives - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

Polyethylene 1220P is a butene Linear Low Density Polyethylene for general blown film extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability Complies with: - U.S. FDA 21 177.1520 (c) 3.2a - EU. No 10/2011 - Consult the regulations for complete details.

- Used in Industrial, Food and Specialty Packaging - Better optics and processability Complies with: - U.S. FDA 21 177.1520 (c) 3.2a. - EU, No 10/2011 Consult the regulations for complete details.

Polyethylene Resin 1221P is a butene Linear Low Density Polyethylene for general cast extrusion film applications. Main Characteristics: - Used in Industrial, Food & Specialty Packaging - Better optics and processability - Better color stability Complies with: - U.S. FDA 21 177.1520 (c) 3.2a . - EU. No 10/2011 - Consult the regulations for complete details.

DOW™ DGDA-5310 GMB is a Medium Density Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment complying extensively with the requirements of GM13. Utilizing the highest density MDPE allows gives DGDA-5310 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its medium density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes. Principle Characteristics: - Resin designed for geomembranes - Excellent processability in high thickness - Excellent ESCR and oxidation resistance - Meets GM Standard 13

DOW™ DGDA-5311 is a Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown or Cast film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment. Utilizing higher density MDPE gives DGDA-5311 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes. Principle Characteristics: - Resin designed for geomembranes - Excellent processability in high thickness - Excellent ESCR and oxidation resistance

DOW™ DGDA-6098 NT 7 High Density Polyethylene Resin is a HDPE resin designed for use in a variety of blown film applications where excellent processability, stiffness and clarity are needed. Main characteristics: - High melt strength - Easy to process - High stiffness. - High clarity Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Consult the regulations for complete details.

For Extrusion Coating Applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a Consult the regulations for complete details.

DOW HDPE 05962B is a High Density Polyethylene produced via SOLUTION™ technology. This resin presents a narrow molecular weight distribution that offers excellent impact resistance in rigid packaging, high gloss, excellent stiffness and processability. Main Characteristics - Resin for Injection Molding - Pails and Crates - Resin for Cast film - Film for diapers, femine hygiene Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details

DOW HDPE 08454N Resin is a narrow molecular weight distribution copolymer designed to offer excellent impact strength and toughness with good stiffness. This resin has good processability over a wide range of molding conditions. - For structural foams, industrial containers, cases/crates - Excellent impact strength, toughness and good stiffness Complies with: - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA-DMF - U.S. USP Consult the regulations for complete details.

- For toys and housewares - Good low temperature impact strength, gloss and excellent toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOW HDPE 17450N is a narrow molecular weight distribution copolymer designed to offer low temperature impact strength and gloss with excellent toughness. This resin has good processability over a wide range of molding conditions.

POLYETHYLENE HIGH DENSITY 25055E High Density Polyethylene Resin is a very narrow molecular weight distribution resin, developed to impart excellent mechanical properties, high gloss and high surface finishing to injection moulded parts, while providing easy processing. Applications: - Housewares - Food containers - Toys Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 - Canadian HPFB (No Objection) Consult the regulations for complete details.

HDPE 35054L is a bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance of mechanical properties and a very high Environmental Stress Cracking Resistance (ESCR). Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Lubricants -- Car care products -- Toys -- Automotive Parts Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulation for complete details

HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - FDA regulation 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity. Main Characteristics: - Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics - Containers - Toys - Parts for cars Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - EU, No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 35060L is a High Density Polyethylene intended for Blow Molding applications. The bimodal molecular weight distribution of this resin leads to a high environmental stress crack resistance without sacrificing the rigidity (density). Its high density allows for weight reduction keeping the container performance. It is especially suitable for the production of bottles, containers and technical hollow articles Applications: - Containers for: -- Household & industrial chemicals (e.g. detergents and softeners) -- Personal care products and Cosmetics -- Food products -- Mineral oils -- Car care products - Toys - Automotive parts Complies with: - U.S. FDA 21 177 1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 40055L HF is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers. The viscosity of this resin has been specially tailored for machinery that requires slightly higher fluidity than the one provided by the Dow™ HDPE 40055L. Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc.) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with Regulation: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulation for complete details

HDPE 40055L is a bimodal High Density Polyethylene resin that combines outstanding environmental stress crack resistance (ESCR) with good stiffness and impact resistance. Its rheological characteristics make it ideal for the production of medium size containers Applications: - Jerrycans and medium size containers for: -- Aggressive liquids (e.g. detergents, surfactants, etc) -- Chemicals -- Agrochemicals -- Food products - Containers requiring UN approval for the transport of dangerous goods - Industrial parts - Sheet extrusion Complies with: - FDA regulation 177.1520(c)3.2a - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12 Consult the regulations for complete details.

HDPE 80017 is a High Density Polyethylene, copolímero of medium molecular weight, produced in the Slurry Process. This resin presents an excellent balance of properties and processability. Because of its molecular structure, this material combines a high impact resistance and Environmental Stress Cracking Resistance (ESCR), with high rigidity, suitable for the fabrication of corrugated pipes of single and double wall. Main Characteristics: - Corrugated pipes of single and double wall - Pipes for drain and waste - Complies with FDA 21 CFR 177.1520(c) 3.2a - Consult the regulation for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - For cap and closure, household products and toys Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

DOW™ HDPE 8262B is high density resin designed for use in reusable boxes and drawers as well as injection of rigid parts. Main Characteristics - High Density Polyethylene Resin (HDPE) - Excellent processability, UV stabilized Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

- For injection molding applications - Fully thermal and UV stabilized for outdoor use - For beverage crates, pails and buckets Complies with: - U.S.FDA 21 CFR 177.1520 (c) 3.2A - Europe: Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

Industrial Standards Compliance: - ASTM D 3350: cell classification PE445520A (See NOTES 1) - American Association of State Highway and Transportation Officials (AASHTO) M294/MP7 (See NOTES 2) DOW DGDA-2485 NT High Density Polyethylene resin is produced using UNIPOL™ II process technology and meets the needs of a wide variety of end uses including profile extrusion applications such as corrugated pipe. It combines excellent ESCR/NCLS with superior toughness and processability. NOTES: (1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (2) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

DOW DGDA-5004 NT 7 High Density Polyethylene (HDPE) resin is a multi-purpose polymer designed for sheet extrusion and thermoforming applications, including single-serve disposables and other thin walled containers. Main Characteristics: - Maximum rigidity - High Impact Strength - Good Top Load Strength - Optimized Shear Rheology for Good Processability - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Consult the regulations for complete details.

DGDA-9290 NT is a high performance Bimodal Polyethylene resin with an outstanding balance of processability and toughness, designed for communications and power cable jacketing applications. DGDA-9290 NT has superior Environmental Stress Crack and Chemical Resistance.

DOW DGDB-2480 NT High Density Polyethylene resin is produced using UNIPOL™ process technology. It is intended for use in pipe applications where long term hydrostatic strength and resistance to slow crack growth are desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE345464A - Black - PE345464C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - DGDB-2480 NT 3408 -- ASTM PE3608 pipe grade - 1600psi HDB @ 73°F - Black Pipe - DGDB-2480 BK 3408 (See NOTES B) -- ASTM PE3608 pipe grade - 1600psi HDB @ 73°F and 800psi HDB @ 140°F National Sanitation Foundation (NSF) Standard 14 and 61 - Natural Pipe - DGDB-2480 NT 3608 - Black Pipe - DGDB-2480 BK 3608 (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

DOW DGDB-5004 NT 7 High Density Polyethylene (HDPE) resin is a multi-purpose polymer designed for sheet extrusion and thermoforming applications, including single-serve disposables and other thin walled containers including food service such as cups, plates, bowls and refrigerated dairy containers. Main Characteristics: - Maximum rigidity - Excellent color consistency - High Melt Strength - High Impact Strength including low temperature toughness - Good Top Load Strength - Optimized Shear Rheology for Good Processability Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details.