Industrial Standards Compliance: - ASTM D 3350: cell classification PE435440A CONTINUUM DGDA-2488 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. It is specifically designed for use in all duct and cable in conduit (CIC) applications for both telecommunications and power cables. Typical uses include high performance conduit for fiber optic networks and 5G expansion. The natural resin combined with color concentrate can be readily processed by any current duct or conduit extrusion method in all sizes at commercial rates.

CONTINUUM™ DGDA-2490 BK GL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ISO Standard -- MRS 10 / 20°C, PE100 listed by Exova -- CRS 10 (20°C, 100 yr); CRS 8 (40°C, 90 yr); CRS 6.3 (60°C, 11 yr); CRS 11.2 (14°C, 50 yr)

CONTINUUM™ DGDA-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445576C CC2 (MRS)(See NOTES A) -- Black - PE445574C CC2 (HDB) (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDA-2490 BK (See NOTES A) -- ISO PE100 pipe grade - CRS 10 @ 20°C; MRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr; CRS 11.2 @ 14°C, 50 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDA-2490 Black 100 (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2490 BL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural - PE445574A CC2 -- Blue - PE445574E CC3 (See Notes A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe - CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- Blue Pipe - CONTINUUM™ DGDA 2490 BL (See Notes B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on blue resin (natural resin plus 2% DFDB-0027 BL2). (B) Natural resin extruded under proper conditions with 2.0% blue masterbatch DFDB-0027 BL2

CONTINUUM DGDA-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC2 (MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC2 (HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM DGDA-2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F - Black Pipe - CONTINUUM DGDA-2490 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr; CRS 11.2 @ 14°C, 50 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDA-2490 NT - Black Pipe - DGDA-2490 BK (See NOTES A) U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulations for complete details NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDA-2490 WH Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural — PE445574A CC2 -- White - PE445574E CC0 (See Note A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe — CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- White Pipe — CONTINUUM™ DGDA 2490 WH (See Note B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on white resin (natural resin plus 2% DFDA-0027 WH 2). (B) Natural resin extruded under proper conditions with 2.0% white masterbatch DFDA-0027 WH2

CONTINUUM™ DGDA-2492 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black - PE445576C CC2 (MRS) (See notes A) - Black - PE445574C CC2 (HDB) (See notes A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM™ DGDA-2492 BK (See Notes A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 BK³ ASME - Code Case N755 Consult the regulations for complete details. Notes: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT N Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include water pipes at nuclear power facilities, natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C CC2 (See NOTES) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492N BK -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black PE4710 Pipe - CONTINUUM DGDA-2492 Consult the regulations for complete details. NOTES: Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC0(MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC0(HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 Black (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2502 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDA-2502 BK has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC0 - Black - PE445574C CC2 (see Notes A & B) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDA-2502 NT -- ASTM PE4710 pipe grade - 1600psi HDB,1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - Black Pipe - CONTINUUM DGDA-2502 BK (see Notes 1 & 2) -- ISO PE100 Pipe grade - MRS 10 @ 20° C -- ASTM PE4710 pipe grade - 1600psi HDB, 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International : Standard 14 & 61 - Natural Pipe - DGDA-2502 NT - Black Pipe - DGDA-2502 BK (see Notes A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: - ASTM D 3350: cell classification - Black - PE445576C - Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES A) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; MRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB @ 73°F and 1000psi HDB @ 140°F - National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES A) - Standard 14 and 61. - Consult the regulations for complete details. CONTINUUM™ DGDB-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A - Black - PE445576C (See NOTES A & B) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES B) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB and 1000 psi HDS @ 73°F and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES B) Consult the regulations for complete details. CONTINUUM™ DGDB-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445574C CC2 (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDC-2480 NT - Black Pipe - CONTINUUM DGDC-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2480 NT - Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).

CONTINUUM™ DGDC-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600 psi HDB and 1000 psi HDS @ 73°F -- 1000 psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - CSA B137.1 PE4710 PLUS and B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural Resin - PE445574A CC3 - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDC-2492 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600psi HDB and 1000psi HDS @ 73°F -- 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM™ DGDC-2492 Black (See NOTES B) Canadian Standards Association (CSA) - Black Pipe - B137.1 PE4710 PLUS - Black Pipe - B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2502 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDC-2502 NT has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC3 - Black - PE445574C CC3 (see Notes A and B) - Plastics Pipe Institute (PPI): TR-4Natural Pipe - CONTINUUM DGDC-2502 NT ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - Black Pipe - CONTINUUM DGDC-2502 BK (see Note A & B)ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - ISO PE100 pipe grade - MRS 10 @ 20° C - NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2502 NT - Black Pipe - DGDC-2502 BK (see Note A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK). (B) Natural resin extruded under proper conditions with 6.5% carbon black masterbatch DFNF-0092 BK.

CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance ASTM D 3350: cell classification - Black - PE445574 CC0 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) - ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDD-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance - ASTM D 3350: cell classification -- Natural - PE445574A -- Black - PE445574C (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in compression and injection molded beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. CONTINUUM™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. CONTINUUM™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end results are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. Main Characteristics: - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

CONTINUUM™ DMDC-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA-DMF - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDC-1270 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Additive Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection - USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes

CONTINUUM™ DMDD-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details.

CONTINUUM™ DMDE-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Agent Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a. Consult the regulations for complete details.

DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDF-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

DOW ENDURANCE™ DHDA-7708 BK is a thermoplastic semiconductive compound specifically designed for jacketing over medium, high, and extra-high voltage power cables. It combines the excellent physical properties and low moisture vapor transmission normally associated with Dow insulating jacket materials with the conductivity of thermoplastic semiconductive insulation shielding compounds. In medium voltage cable applications, a semiconductive jacket provides cable endurance and prolongs cable life by reducing neutral-to-ground impulse voltage. The semiconductive jacket enables on-reel cable diagnostic analysis in high and extra-high voltage applications. Compared to conventional thermoplastic semiconductive materials, DOW ENDURANCE™ DHDA-7708 BK offers: - Improved environmental stress-crack resistance - Improved low-temperature properties - Improved thermomechanical properties - Reduced adhesion to strippable insulation shields - Improved cut-through and abrasion resistance - Reduced moisture vapor transmission Details are shown in Figures 1 to 4 Specifications Cables jacketed with DOW ENDURANCE™ DHDA-7708 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - AEIC: CS8, CS9 - ICEA: S-94-649 Type 1, S-108-720 Type 1 - IEC: 60502, 60840, 62067

DOW HFDA-0100 BK is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW HFDA-0100 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors. Specifications: DOW HFDA-0100 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW HFDA-0100 BK, prepared using sound commercial fabrication practice, meets the following specifications: - IEC 60502-02 - BS 7870-4.10 (1) DOW HFDA-0100 BK EXP3 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulation such as EPR and EPDM's, the user is cautioned to establish the utility of DOW HFDA-0100 BK with each formulation.

DOW ENDURANCE™ HFDB-0801 BK EC is a vulcanizable semiconductive compound based on a polyethylene copolymer and is designed for conductor shield and bonded insulation shield applications in crosslinked polyethylene insulated medium and high voltage cables.(1) DOW ENDURANCE™ HFDB-0801 BK EC has improved processability and demonstrated compatibility with copper and aluminum conductors. DOW ENDURANCE™ HFDB-0801 BK EC was specifically developed utilizing a special acetylene carbon black to provide a super-smooth surface yielding a more perfect interface between the extruded shield and the insulation. As a result, significantly improved cable performance can be expected. DOW ENDURANCE™ HFDB-0801 BK EC is formulated with a higher temperature peroxide. Thus, DOW ENDURANCE™ HFDB-0801 BK EC is less subject to pre-cure or scorch within the processing extruder and die. Specifications DOW ENDURANCE™ HFDB-0801 BK EC is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDB-0801 BK EC, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - AEIC: CS7, CS8 - IEC: 60502, 60840, 62067 - ICEA: S-108-720, S-94-649; S-97-682; S-93-639 (NEMA WC 74), - DIN: VDE 0273

DOW ENDURANCE™ HFDB-4201 EHV is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound of extreme cleanliness developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE™ HFDB-4201 EHV has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 EHV is recommended especially for the insulation of extra high voltage power transmission cables rated above 230 kV. Specifications HFDB-4201 EHV is designed for use in power distribution and transmission cables. Cables insulated with HFDB-4201 EHV, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067 - AEIC CS9 - ANSI/ICEA: S-108-720 - GB/T 22078

DOW ENDURANCE™ HFDB-4201 SC is a long-life, unfilled, crosslinkable, low density, super clean polyethylene insulation compound developed especially for the insulation of high voltage power cables. DOW ENDURANCE™ HFDB-4201 SC has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 SC is recommended for the insulation of high voltage power transmission cables rated up to 230 kV. Specifications HFDB-4201 SC is designed for use in power distribution and transmission cables. Cables insulated with HFDB-4201 SC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067, 60840 - CENELEC HD 632 S3 - AEIC* CS9 - ANSI/ICEA*: S-108-720 - GB/T 11017, GB/Z 18890 *Applicable to USA manufactured product only.

DOW ENDURANCE™ HFDB-4201 VC is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. It has a very low level of contamination and bears the designation Very Clean (VC). DOW ENDURANCE™ HFDB-4201 VC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. DOW ENDURANCE™ HFDB-4201 VC is recommended for the insulation of power distribution and transmission cables rated at less than 150 kV with stresses less than 7 kV/mm. Specifications DOW ENDURANCE™ HFDB-4201 VC is designed for use in power distribution and transmission cables. Cables insulated with DOW ENDURANCE™ HFDB-4201VC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 60502, 60840 - GB/T 12706 - ANSI/ICEA*: S-94-649, S-97-682, S-93-639/NEMA WC74 - CENELEC HD 620 S2 - BSI BS 6622, 7870-4 *Applicable to USA manufactured product only.

Dow ENDURANCE™ HFDC-4202 EC is a long-life, water-tree-retardant, unfilled, crosslinkable, low density polyethylene insulation compound designed for distribution and transmission power cable applications. It has a very low level of contamination and bears the designation Extra Clean (EC). HFDC-4202 EC has been designed to have a low level of additive bloom for a long storage life, low dusting and an enhanced degree of scorch retardance for long production run lengths during cable manufacture. The permanent tree-retardant additive provides improved performance in power cables in service involving exposure to moisture while retaining the excellent physical, electrical, and processing attributes of conventional, crosslinkable polyethylene. DOW ENDURANCE™ HFDC-4202 EC compound provides electric utilities with: - Advanced, next generation "water" tree-retardant technology, consistently outperforming conventional XLPE and conventional TR-XLPE in accelerated cable wet aging tests at ambient and elevated temperatures - Proven in the field water tree retardance technology for over 25 years, at a broad cross section of geographical conditions, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE™ HFDC-4202 EC compound represents an advancement over conventional water tree-retardant, power cable insulation compounds. DOW ENDURANCE™ HFDC-4202 EC is recommended for the insulation of power distribution cables rated up to 46 kV and can be used for transmission cables rated up to 69 kV. Specifications DOW ENDURANCE™ HFDC-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables. DOW ENDURANCE™ HFDC-4202 EC provides improved wet electrical performance and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with HFDC-4202 EC, using sound commercial fabrication manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S2 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

Ultra Clean Polyethylene Compound for Extra High Voltage Power Cable Insulation DOW ENDURANCE™ HFDK-4201 EHV is a long-life, crosslinkable, low-density, polyethylene insulation compound of extreme purity developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE HFDK-4201 EHV is equipped with a non-migrating stabilizer providing high thermal stability, long term stability, and optimum cross linking behavior. Applications: DOW ENDURANCE HFDK-4201 EHV is recommended especially for the insulation of extra high voltage power transmission cables >220kV. Specifications: Cables insulated with DOW ENDURANCE HFDK-4201 EHV would be expected to meet the requirements in the following standards when processed using state-of-the-art cable manufacturing practices - IEC: 62067, 60840 - CENELEC: HD 632 S2 - AEIC: CS9 - ANSI/ICEA: 108-720-2004 - GB/T 11017 , GB/Z 18890

DOW ENDURANCE™ HFDK-4201 SC is a long-life, unfilled, crosslinkable, low density, super clean polyethylene insulation compound developed especially for the insulation of high voltage power cables. DOW ENDURANCE™ HFDK-4201 SC has been designed with a non-migrating stabilizer providing high thermal stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE™ HFDK-4201 SC is recommended for the insulation of high voltage power transmission cables rated up to 230 kV. Specifications HFDK-4201 SC is designed for use in power distribution and transmission cables. Cables insulated with HFDK-4201 SC, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067, 60840 - CENELEC HD 632 S3 - GB/T 11017, GB/Z 18890

DOW ENDURANCE™ HFDK-4202 EC Polyethylene Compound is a long life water tree retardant, unfilled, crosslinkable low-density polyethylene compound. The permanent tree retardant additive provides improved performance service involving exposure to moisture while retaining the excellent physical, electrical and processing attributes of crosslinkable polyethylene. DOW ENDURANCE HFDK-4202 EC compound provides electric utilities with: - State-of-the-art "water" tree-retardant technology, consistently outperforming conventional XLPE in all accelerated cable wet aging tests at ambient and elevated temperatures - Technology which has been proven in the field for over 25 years, demonstrating excellent reliability and help achieving lowest life cycle costs - Excellent electrical performance demonstrated by very high aged electrical strength and very low aged dissipation factor and power loss. DOW ENDURANCE HFDK-4202 EC Compound represents the state-of-the-art in tree-retardant, power cable insulation compounds. Specifications DOW ENDURANCE HFDK-4202 EC tree-retardant compound is designed for use in power distribution and sub-transmission cables, especially in underground applications. DOW ENDURANCE HFDK-4202 EC provides improved performance over XLPE cables and is recommended, with or without moisture barriers, for use as cable insulation up to and including 69 kV applications. Cables insulated with DOW ENDURANCE HFDK-4202 EC, using sound commercial manufacturing practice, would be expected to meet the following specifications and regulations: - ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74 (TR-XLPE requirements) - AEIC: CS8 - RUS 50-70 (U-1) - CEA: WCWG-01, WCWG-02 - UL 1072 - IEC: 60502, 60840 - CENELEC: HD 620 S1, Part 1, DIX 3 to 14 - DIN VDE 0276-620 - BSI BS 6622 - GB/T 12706 - DL/T 1070

DOW ENDURANCE™ HFDK-9253 EHV is a long-life, unfilled, crosslinkable, low density polyethylene insulation compound of extreme cleanliness developed especially for the insulation of power cables that employ high electrical stresses. DOW ENDURANCE HFDK-9253 EHV has been designed for cable production processes on horizontal vulcanization lines and for cables with thick insulation manufactured on standard catenary vulcanization lines. DOW ENDURANCE HFDK-9253 EHV has been designed with a non-migrating stabilizer providing high thermal stability, long term stability and optimum crosslinking behavior. It has an enhanced degree of scorch retardance for fine mesh filtering and long production run lengths during cable manufacture. DOW ENDURANCE HFDK-9253 EHV is recommended especially for the insulation of extra high voltage power transmission cables rated above 230 kV. Specifications Cables insulated with DOW ENDURANCE HFDK-9253 EHV, using sound commercial manufacturing practice, would be expected to meet the latest editions of the following specifications and regulations: - IEC 62067 - AEIC CS9 - ANSI/ICEA: S-108-720 - GB/T 22078