Polyethylene (PE) by The Dow Chemical Company
Product | Availability | Product Description |
---|---|---|
AGILITY™ 1001 Performance LDPE | Europe |
AGILITY™ 1001 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability.
Main Characteristics:
- Faster processing LDPE resin
- Designed for higher output rates in blends with LLDPE resins at 10-20% loading
- Optimized molecular structure gives improved optics in blends with LLDPE resins
Complies with:
- EU No 10/2011
- U.S.FDA 21 CFR 177.1520 (c) 2.2
- Canadian HPFB No Objection
Consult the regulations for complete details
|
AGILITY™ 1002 Performance LDPE | Latin America |
AGILITY™ 1002 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. This resin includes 2,000 ppm of anti-block to minimize blocking issues.
Main Characteristics:
- Faster processing LDPE resin
- Designed for higher output rates in blends with LLDPE resins at 10-20% loading - - Optimized molecular structure gives improved optics in blends with LLDPE resins
Complies with:
- EU No 10/2011
- U.S.FDA 21 CFR 177.1520 (c) 2.2
- Canadian HPFB No Objection
Consult the regulations for complete details
|
AGILITY™ 1021 Performance LDPE | North America |
AGILITY™ 1021 Performance LDPE is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE rich blends while maintaining optics.
Main Characteristics:
- Faster processing LDPE resin
- Designed for higher output rates in blends with LLDPE resins at 20-30% loading - Optimized molecular structure gives improved optics in blends with LLDPE resins
Complies with:
- EU No 10/2011
- U.S.FDA 21 CFR 177.1520 (c) 2.2
- Canadian HPFB No Objection
Consult the regulations for complete details
|
AGILITY™ 1022 Performance LDPE | North America |
AGILITY™ 1022 Performance LDPE resin is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE blends while maintaining optics.
Main Characteristics:
- Faster Processing LDPE resin
- Designed for higher output rates in blends with LLDPE resin at 20-30% loading
- Optimized molecular structure gives improved optics in blends with LLDPE reins
Complies with:
- U.S.FDA 21 CFR 177.1520 (c) 2.1
- EU No 10/2011
- Canadian HPFB No Objection
Consult the regulations for complete details
|
AGILITY™ 1023 Performance LDPE | Latin America |
AGILITY™ 1023 Performance LDPE is used in clarity packaging with good stiffness neat and in blends with LLDPE for industrial and food packaging applications.
Main Characteristics:
- High optics for sparkling packages
- Good stiffness
- Excellent processability
Complies with:
- EU No 10/2011
- U.S.FDA 21 CFR 177.1520 (c) 2.2
Consult the regulations for complete details
|
AGILITY™ 1200 Performance LDPE | Asia Pacific |
AGILITY™ 1200 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. It also has excellent shrink and good optics performance in blends with LLDPE resins.
|
AGILITY™ 1500 | Latin America |
AGILITY™ 1500 Performance LDPE is a high pressure LDPE resin designed specifically for high processability and good optics neat and in blends with LLDPE resins for blown or cast films.
Complies with:
- U.S. FDA 21 CFR 177.1520(c )2.2
- EU, No 10/2011
- Canadian HPFB No Objection
Consult the regulations for complete details.
|
AGILITY™ 2000 Performance LDPE | Europe |
AGILITY™ 2000 Performance LDPE is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides high stiffness and tear resistance with exceptional bubble stability, high levels of shrink, very good toughness and optical properties.
Main Characteristics:
- High output rates
- Very high stiffness combined with good toughness - for potential downgauging
- Very high tear resistance
- High puncture resistance
- Very high shrink
|
AGILITY™ 2001 | Latin America |
AGILITY™ 2001 Performance LDPE Resin is a high pressure LDPE resin offering clarity combined with high shrink tension and strength.
Main Characteristics:
- Optimum LDPE for retail shrink packaging
- Excellent combination of shrink force and sparkling optics
- Toughness for demanding applications
Complies with:
- U.S. FDA 21 CFR 177.1520(c)2.2
- Consult the regulations for complete details
|
AGILITY™ AT 1604 | Europe |
AGILITY™ AT 1604 Performance LDPE can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230°C. AGILITY™ AT 1604 Performance LDPE has been designed to have excellent bubble stability and is therefore particularly suited to large wide width blown film application such as agricultural films
Applications:
- Heavy duty industrial film
- Agricultural Film
- Shrink Films
AGILITY™ AT 1604 Performance LDPE should comply with:
- EU, No 10/2011
- U.S. FDA 21 CFR 177.1520(c)2.2
Consult the regulations for complete details
|
AGILITY™ EC 7000 Performance LDPE | Europe |
AGILITY EC 7000 Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating
Main Characteristics:
- Recommended for extrusion at high and low temperatures
- Robustness in melt drawing
- Performance as sealant polymer
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
- U.S. FDA-DMF
Consult the regulations for complete details.
|
AGILITY™ EC 7000 R Performance LDPE | Europe |
AGILITY EC 7000 R Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating
Main Characteristics:
- Recommended for extrusion at high and low temperatures
- Robustness in melt drawing
- Performance as sealant polymer
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
- ISCC PLUS certification for renewable-based plastics
Consult the regulations for complete details.
|
AGILITY™ EC 7000 REN Performance LDPE | Europe |
AGILITY EC 7000 REN Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating
Main Characteristics:
- Recommended for extrusion at high and low temperatures
- Robustness in melt drawing
- Performance as sealant polymer
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
- U.S. DFA-DMF
- ISCC PLUS certification for bio-circular plastics
Consult the regulations for complete details.
|
AGILITY™ EC 7030 Performance LDPE | Europe |
AGILITY™ EC 7030 Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min.
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
Consult the regulations for complete details.
|
AGILITY™ EC 7030 R Performance LDPE | Europe |
AGILITY™ EC 7030 R Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 R Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min.
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
- ISCC PLUS certification for renewable-based plastics
Consult the regulations for complete details.
|
AGILITY™ EC 7030 REN Performance LDPE | Europe |
AGILITY™ EC 7030 REN Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 REN Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min.
Complies with:
- Europe Commission Regulation (EU) No 10/2011
- U.S. FDA 21 CFR 177.1520 ( c )2.1
- U.S. FDA-DMF
- ISCC PLUS certification for bio-circular plastics
Consult the regulations for complete details.
|
AGILITY™ EC 7220 Performance LDPE | Europe |
AGILITY™ EC 7220 Performance LDPE is a high melt strength LDPE, designed for the foam industry. This resin enables the stable production of very low density foams. It can be used both in crosslinked and non-crosslinked products.
Complies with:
- Europe Commission Regulation (EU) No 10/2011.
- U.S. FDA 21 CFR 177.1520(c)2.1.
Consult the regulations for complete details.
|
APPEEL™ 1181 | Africa & Middle East |
APPEEL™ 1181 is a modified ethylene vinyl acetate resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals over a broad temperature range to a number of container materials including PP, PET, PS and aluminum. It will also provide destruct seals to PVC and PE.
APPEEL™ 1181 is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Features
- High clarity and low seal initiation temperature.
Characteristics / Benefits
- Contains amide slip agent
- Contains antiblock agent
|
APPEEL™ 11D542 | Africa & Middle East |
APPEEL™ 11D542 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide interfacial peel seals film to film, and occasionally for peel seal from HDPE, LLDPE, or low %EVA films. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Characteristics / Benefits
- Cohesive type peel seal.
Applications
- Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,
|
APPEEL™ 11D554 | Africa & Middle East |
APPEEL™ 11D554 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals to polypropylene, polystyrene and polystyrene foam and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
|
APPEEL™ 2044 | Africa & Middle East |
APPEEL™ 2044 is a blown or cast film resin designed to be a sealing layer for lidding applications. It provides a peelable seal over a broad temperature range to a number of container materials including ABS, CPET, HDPE, PETG, PP, PS, and APET. It will provide stronger seals to HIPS, PVC, and HDPE. APPEEL™ 2044 is a modified ethylene vinyl acetate polymer available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Characteristics / Benefits
- Contains amide slip agent
- Contains antiblock agent
|
APPEEL™ 52004 | Africa & Middle East |
APPEEL™ 52004 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Good heat sealability and easy peelability to foamed PS.
- Excellent direct foil adhesion without the use of primers.
- APPEEL™ 52004 conforms to Code #20 of the Ministry of Health and Welfare Japan.
Typical structures for this lidding would be:
Paper/PE/Foil/APPEEL™ 52004
APPEEL™ 52004 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup.
APPEEL™ 52004 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 52009 | Africa & Middle East |
APPEEL™ 52009 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Good heat sealability and easy peelability to foamed PS.
- Excellent direct foil adhesion without the use of primers.
- APPEEL™ 52009 conforms to Code #20 of the Ministry of Health and Welfare Japan.
Typical structures for this lidding would be:
Paper/PE/Foil/APPEEL™ 52009
APPEEL™ 52009 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup.
APPEEL™ 52009 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53007 | Africa & Middle East |
APPEEL™ 53007 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Low temperature heat seal. APPEEL™ 53007 offers low temperature heat seals with adequate seal strength at 90°C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53007 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53007 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- APPEEL™ 53007 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53007 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53007
PET/PE/ APPEEL™ 53007
Over lacquer/Print/Foil/PE/ APPEEL™ 53007
Paper/PE/Foil/PE/ APPEEL™ 53007
APPEEL™ 53007 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53008 | Africa & Middle East |
APPEEL™ 53008 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Low temperature heat seal. APPEEL™ 53008 offers low temperature heat seals with adequate seal strength at 90C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53008 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53008 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- Boiling resistance. APPEEL™ 53008 endures boiling process, whose conditions are 85C / 30min.
- APPEEL™ 53008 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53008 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53008
PET/PE/ APPEEL™ 53008
Over lacquer/Print/Foil/PE/ APPEEL™ 53008
Paper/PE/Foil/PE/ APPEEL™ 53008
APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53009 | Africa & Middle East |
APPEEL™ 53009 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Low temperature heat seal. APPEEL™ 53009 offers low temperature heat seals with adequate seal strength at 90C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53009 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53009 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- Boiling resistance. APPEEL™ 53009 endures boiling process, whose conditions are 85C / 30min.
- APPEEL™ 53009 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53009 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53009
PET/PE/ APPEEL™ 53009
Over lacquer/Print/Foil/PE/ APPEEL™ 53009
Paper/PE/Foil/PE/ APPEEL™ 53009
APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53010 | Africa & Middle East |
APPEEL™ 53010 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Low temperature heat seal. APPEEL™ 53010 offers low temperature heat seals with adequate seal strength at 90C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53010 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53010 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- APPEEL™ 53010 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53010 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53010
PET/PE/ APPEEL™ 53010
Over lacquer/Print/Foil/PE/ APPEEL™ 53010
Paper/PE/Foil/PE/ APPEEL™ 53010
APPEEL™ 53010 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53021 | Africa & Middle East |
APPEEL™ 53021 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Applications
- Low temperature heat seal. APPEEL™ 53021 offers low temperature heat seals with adequate seal strength at 90oC.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53021 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53021 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- APPEEL™ 53021 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53021 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53021
PET/PE/ APPEEL™ 53021
Over lacquer/Print/Foil/PE/ APPEEL™ 53021
Paper/PE/Foil/PE/ APPEEL™ 53021
APPEEL™ 53021 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53070 | Africa & Middle East |
APPEEL™ 53070 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Features
- *** Contains amides for slip / chill roll release, but more than in APPEEL™ 53071.
Applications
Contains amides for slip / chill roll release, but more than in APPEEL™ 53071.
- Low temperature heat seal. APPEEL™ 53070 offers low temperature heat seals with adequate seal strength at 90C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53070 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53070 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- Boiling resistance. APPEEL™ 53070 endures boiling process, whose conditions are 90C / 30min.
- APPEEL™ 53070 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53070 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53070
PET/PE/ APPEEL™ 53070
Over lacquer/Print/Foil/PE/ APPEEL™ 53070
Paper/PE/Foil/PE/ APPEEL™ 53070
APPEEL™ 53070 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
APPEEL™ 53071 | Africa & Middle East |
APPEEL™ 53071 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins.
Uses
- Lidding Sealant
Features
- *** Contains amides for slip / chill roll release, but less than in APPEEL™ 53070.
Applications
Contains amides for slip / chill roll release, but less than in APPEEL™ 53070.
- Low temperature heat seal. APPEEL™ 53071 offers low temperature heat seals with adequate seal strength at 90C.
- Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53071 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers.
- APPEEL™ 53071 allows a peelable seal from most plastic materials excluding PE.
- High transparency.
- Boiling resistance. APPEEL™ 53071 endures boiling process, whose conditions are 90C / 30min.
- APPEEL™ 53071 conforms to Code #20 of the Ministry of Health and Welfare Japan.
- APPEEL™ 53071 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items.
Typical structures for this lidding would be:
OPP/PE/ APPEEL™ 53071
PET/PE/ APPEEL™ 53071
Over lacquer/Print/Foil/PE/ APPEEL™ 53071
Paper/PE/Foil/PE/ APPEEL™ 53071
APPEEL™ 53071 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.
|
ASPUN™ 6834 | Asia Pacific |
ASPUN 6834 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment (Mono and Bico configuration). Commercial uses are in the non-woven areas offering excellent softness and drapability, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Commercially in Staple Fibers it is used for low bonding fibers as bicomponent sheath.
Note: ASPUN 6834 Fiber Grade Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.
Applications:
- Housewares
- Textiles & Fibers
- Health & Hygiene
- Automotive Interiors
- Medical Packaging
|
ASPUN™ 6835A | Asia Pacific |
- Designed for processing into yarn and bonding fibers
- Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.
- Consult the regulations for complete details.
ASPUN™ 6835A Fiber Grade Resin is a linear low density polyethylene (LLDPE). A typical process is staple fiber production.
|
ASPUN™ 6840A | North America |
ASPUN* 6840A Fiber Grade Resin is a linear low density polyethylene (LLDPE). A typical process is spunbond non-woven or staple fiber production
- Is designed for processing into nonwoven fabrics and nonwoven fibers
- Soft fabric with excellent drape
- Low melting point for bonding
Complies with:
- US. FDA 21 CFR 177.1520(c)3.1A
Consult the regulation for complete details.
|
ASPUN™ 6850 | Europe |
Aspun™ 6850 Fiber Grade Resin is a linear low density polyethylene (LLDPE). Typical processes include spun-bond nonwoven and staple fiber production.
Characteristics:
Designed for processing into nonwoven fabrics and bonding fibers.
Soft fabric with excellent drape.
Low melting point for bonding.
It complies with:
- U.S. FDA 21 CFR 177.1520 (c) 3.2a
- EU, No 10/2011
Consult the regulations for complete details.
Notes:
The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.
|
ASPUN™ 6850A | Asia Pacific |
ASPUN™ 6850A Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film.
Complies with:
- U.S. FDA 21 CFR 177.1520 (c) 3.2a
- EU, No 10/2011
Consult the regulations for complete details.
Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.
|
ASPUN™ AT 2135 | Asia Pacific |
ASPUN™ AT 2135 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film.
Complies with:
- U.S. FDA 21 CFR 177.1520 (c) 3.2a
- EU, No 10/2011
Consult the regulations for complete details.
Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.
|
ATTANE™ 4201G | Asia Pacific |
- For food packaging applications
- Offers toughness, seal properties, optical properties and processability
Complies with:
- U.S. FDA FCN 424
- Canadian HPFB No Objection (with Limitations)
- EU, No 10/2011
- U.S. FDA-DMF
Consult the regulations for complete details.
|
ATTANE™ 4203 | Asia Pacific |
- For packaging and food packaging applications
- Offers high pinhole resistance, excellent flexibility and abuse resistance
- Excellent sealing characteristics
- Offers toughness, seal properties, optical properties and processability
Complies with:
- U.S. FDA FCN 424
- U.S. FDA-DMF
- U.S. USP
- EU, No 10/2011
- CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS)
Consult the regulations for complete details.
|
ATTANE™ 4207GC | Europe |
ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer is a skin layer in cast film offers excellent low temperature hot tack properties combined with outstanding tear and impact strength. In stretch film applications, ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer exhibits excellent stretchability as well as good physical and cling properties. ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer can also be utilized in blown film coextrusion where it is combined with other resins having excellent bubble stability allowing ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer to be used as a sealant in multilayer film structures.
Applications:
- Cling layer in cast stretch film.
- Sealants in cast and blown films.
Complies with:
- EU, No 10/2011
- U.S. FDA FCN 424
Consult the regulations for complete details
|
ATTANE™ 4404G | Asia Pacific |
- Provides improved cling in one-sided cling applications
- It has improved toughness and optical properties
Complies with:
- Canadian HPFB No Objection (with limitations)
- EU, No 10/2011
- U.S. FDA CFR 176.170(c)
- U.S. FDA FCN 424
Consult the regulations for complete details.
|