3DXSTAT™ ESD-Safe PETG (polyethylene terephthalate glycol copolymer) is a high-performance 3D printing filament formulated utilizing state-of-the-art conductive additives and premium PETG. This filament is ideal for applications that require consistent and reliable electrostatic dissipation (ESD) protection. 3DXSTAT™ ESD-Safe PETG is an amorphous polymer that offers excellent dimensional stability and enhanced chemical resistance. Suitable for use in practically all consumer-grade FDM/FFF printers. Made by 3DXTECH® in the USA.

3DXMAX® Glass Fiber Reinforced PETG (polyethylene terephthalate glycol copolymer) is a premium 3D printing filament that is formulated utilizing a specialty glass fiber, PETG resin, and custom colorants. PETG is an amorphous polymer that offers excellent layer bonding, dimensional stability, and improved chemical resistance. The addition of specialty sized glass fiber offers enhanced structural properties while maintaining the ability to offer brilliant colors. 3DXMAX® PETG is suitable for use in practically all consumer-grade FDM/FFF printers that have a heated print bed. Made by 3DXTECH® in the USA.

3DXMAX® PETG (polyethylene terephthalate glycol copolymer) is a high-performance 3D printing filament that is formulated utilizing premium PETG resin and colorants. PETG is an amorphous polymer that offers excellent layer bonding, dimensional stability, improved chemical resistance, and brilliant colors. Transparent grades of our PETG offer up to 89% light transmission. FDA and Reach certified for food contact applications. 3DXMAX® PETG is suitable for use in practically all consumer-grade FDM/FFF printers that have a heated print bed. Made by 3DXTECH® in the USA.

Selenis Akolyt KB 311 copolyester has been specifically developed for the extrusion of technical films for graphic arts in general. Films made with Selenis Akolyt KB 311 allow excellent decorative capability, permitting your customers unlimited design freedom and full personalization of the final application. The exceptional clarity of films produced with Selenis Akolyt KB 311 allow reverse printing technique, enhancing printing optics whilst maximizing artwork protection. Elongation of films produced with Selenis Akolyt KB 311 permit thermoformed deep drawing, at the same time as its relatively low Tg grants energy cost savings while guaranteeing perfect adhesion to itself. Proven chemical resistance against common household detergents makes Selenis Akolyt KB 311 the perfect choice for films that will resist everyday weathering.

Selenis Akolyt KM 900 copolyester has been specifically developed for the extrusion of technical films for furniture lamination, graphics arts, and the card film industry. Films made from Selenis Akolyt KM 900 allow excellent decorative capability, permitting your customers unlimited design freedom and full personalisation of the final application. With the Selenis Akolyt KM 900 grade you can choose a variety of finishes to your films, such as embossing techniques and glossy or leather-like surfaces. The exceptional clarity of films produced from Selenis Akolyt KM 900 allow reverse printing technique, enhancing printing optics whilst maximizing artwork protection. Elongation of films produced from Selenis Akolyt KM 900 permit thermoformed deep drawing, at the same time as its relatively low Tg grants energy cost savings while guaranteeing perfect adhesion to the substrates. Proven chemical resistance against common household detergents makes Selenis Akolyt KM 900 the perfect choice for films that will resist everyday weathering.

Base Polymer Polyethyleneterephthalate Glycol Copolyester Colour blue, transparent Thermal Stability Colourant 300 °C max. Light Fastness Colourant blue woolscale 7 For Use In Polyethyleneterephthalate Glycol Copolyester Special Features free from cadmium, lead and diarylide pigments, dust-free, high dispersibility, high additive content Market Segment various Application Area injection moulded parts, blow moulded parts, extruded parts Dosage 4 % extrusion 4 % injection moulding dependant on wall thickness and required colour intensity dependant on application and operational area

Selenis Bondz GG 074 is a copolyester specifically designed for sealing layers in GAG coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product. Selenis Bondz GG 074 greatly improves your film, providing enhanced printability, effortless cutability and easier thermoformability; hence boosting your energy efficiency. Selenis Bondz GG 074 may be used as a primary or secondary packaging material for thermoformed trays, blister applications, and form-fill-seal applications up to 75°C. Selenis Bondz GG 074 guarantees no crystalline haze; thereby assuring your film will be crystal-clear. This solution ensures exceptional adhesion level, while maintaining high clarity and gloss, certifying optimal visual appeal at point of sale.

Selenis Bondz GG 174 is a copolyester specifically designed for sealing layers in GAG coextruded films. Selenis has developed this bonding solution to consistently deliver excellent melt strength and exceptional heat-sealing performance. This product is formulated to provide and sustain the adhesion level crucial to the packaging integrity through the different processes of manufacturing, from coextrusion to thermoforming, securing full protection of the final product. Selenis Bondz GG 174 greatly improves your film, providing enhanced printability, effortless trimming and easier thermoformability; hence boosting your energy efficiency. Selenis Bondz GG 174 may be used as a primary or secondary packaging material for thermoformed trays, blister applications, and form-fill-seal applications up to 75°C. Selenis Bondz GG 174 guarantees no crystalline haze; thereby assuring your film will be crystal-clear. This solution ensures exceptional adhesion level, while maintaining high clarity and gloss, certifying optimal visual appeal at point of sale.

Selenis Bondz HF 098 is the perfect solution for brand owners looking to switch to a fully recyclable APET monolayer food packaging tray. By replacing the usual PE layer with this special polyester, the need for a multilayer in the bottom web is eliminated. This solution decreases the packaging weight and cost, as well as allowing for a fully recyclable bottom web in FFS applications, providing packaging that will meet consumer sustainability concerns.

CarbonX™ Carbon Fiber Reinforced PETG [polyethylene terephthalate glycol copolymer) is a highperformance carbon fiber reinforced 3D printing filament. This grade was formulated utilizing highmodulus carbon fiber and premium PETG - making it ideal for applications that require superior stiffness, chemical resistance, and dimensional stability compared to any traditional unfilled FDM/FFF materials. Suitable for use in practically all consumer-grade FDM/FFF printers that have a heated print bed. Made by 3DXTECH® in the USA.

Selenis Chiliad SP 550 copolyester has been specifically developed for the extrusion of profiles, such as price-tag moldings, machine rail guides, decorative edge trims and tubing. Selenis Chiliad SP 550 is easy to extrude and allows the production of extremely accurate shapes, even at low thicknesses. Profiles produced from Selenis Chiliad SP 550 copolyester may be cold-bent, machined, drilled, sawed like wood and may be easily decorated. Selenis Chiliad SP 550 grade is VCM and styrene free.

Selenis Chiliad SP 650 copolyester has been specifically developed for the extrusion of profiles, such as price-tag moldings, machine rail guides, decorative edge trims and tubing. Selenis Chiliad SP 650 is easy to extrude and allows the production of extremely accurate shapes, even at low thicknesses, whilst maintaining superior impact resistance. Profiles produced from Selenis Chiliad SP 650 copolyester may be cold-bent, machined, drilled, sawed like wood and may be easily decorated. Selenis Chiliad SP 650 grade is VCM and styrene free.

Selenis Chiliad SP 750 copolyester has been specifically developed for the extrusion of profiles that require a higher intrinsic viscosity resulting in high melt strength. Profile extruded from Selenis Chiliad SP 750 show a superior deformation capacity without compromising on elasticity. Selenis Chiliad SP 750 is easy to extrude and allows the production of extremely accurate shapes, even at low thicknesses, whilst maintaining superior impact resistance. Profiles produced from Selenis Chiliad SP 750 copolyester may be cold-bent, machined, drilled, sawed like wood and may be easily decorated. Selenis Chiliad SP 750 grade is VCM and styrene free.

Eastar™ GN007 Copolyester is a water-clear glycol modified polyethylene terephthalate (PET) with an added mold release. Eastar™ GN007 copolyester will not crystallize and thus offers wider processing latitude than conventional crystallizable polyesters. This material offers an excellent combination of clarity, toughness, and melt strength that makes it useful for a variety of processing techniques and end-use applications. This makes this product one of our most versatile materials for the cosmetics and personal care packaging market. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. Applications - Appliances (food contact) - Bottles-skin care pkg - Color cosmetics packaging - Compounders - Consumer housewares-NFC - Equipment & machinery - Flavored water packaging - Fragrance packaging - Jars-skin care pkg - Non-kitchen appliances - Oral hygiene - Pens/stationary - Personal care & cosmetics packaging - Skin care packaging - Sporting equipment - Tools - Water/sport bottles - Wood furniture

Eastar™ GN119 Copolyester is a low-I.V. PETG, for sale only in Asia as a high-flow formulation. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. Applications - Color cosmetics packaging - Packaging components non food contact - Skin care packaging

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components(Carbon-based 10%), ECOZEN® has more heat resistance compared to SKYGREEN®grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components(Carbon-based 10%), ECOZEN® has more heat resistance compared to SKYGREEN®grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components(Carbon-based 10%), ECOZEN® has more heat resistance compared to SKYGREEN®grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components(Carbon-based 10%), ECOZEN® has more heat resistance compared to SKYGREEN®grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components (Carbon-based 2%), ECOZEN® has more heat resistance compared to SKYGREEN® grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components (Carbon-based 2%), ECOZEN® has more heat resistance compared to SKYGREEN® grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliance - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity - Flowability

ECOZEN® is a glycol-modified polyethylene terephthalate (PETG) with exceptional transparency and chemical resistance. Due to plant-derived biomass components (Carbon-based 2%), ECOZEN® has more heat resistance compared to SKYGREEN® grades. ECOZEN® does not contain Bisphenol derivatives (BPA, etc.) and Phthalate-based plasticizer components regulated by the EU RoHS regulations. It also meets the requirements for food contact materials in Korea, the US, Europe, China, and Japan. Applications - Consumer Housewares - Home Appliances - Food and Beverage Packaging Key Attributes - High Heat Resistance - Clarity

The new ECP 2000 series of static dissipative polymers have been formulated specifically for clean room environments where low offgassing, low particulate, contamination and washability are required. The compounds can be coloured. The materials are permanently conductive and can be processed on conventional equipment. The products are humidity independent, aqueous washable and can be re-used. Applications that are ideally suited for the compounds and in use commercially at customer sites include: packaging for electronic components, medical device packaging, in-process carriers, fixturing devices, chip rails, vacuum tubing and business machine components. Because of their flexibility, the thermoplastic polyurethane (TPU) based alloys are also useful as softwall cleanroom materials, flexible packaging, hose and tubing, floor and table mats and other flexible cleanroom applications.

Selenis Flow 65 is a very low viscosity injection moulding copolyester commonly known as "PETG" (PET Glycol modified). In particular thin wall moulding and multiple cavities are easier to work on using this easy-flow resin. Injection moulded parts made from Selenis Flow 65 are water-clear and glossy, whilst virtually unbreakable. Selenis Flow 65 features excellent impact strength and good chemical resistance. Fast injection cycles are possible due to high flowability. Thanks to Selenis Flow 65 high dimensional stability, multiple parts products may be assembled with snap-fit connectors, maintaining the strength required to sustain daily wear and tear.

Selenis Flow 67 is a very low viscosity injection moulding copolyester commonly known as "PETG" (PET Glycol modified). In particular thin wall moulding and multiple cavities are easier to work on using this easy-flow resin. Injection moulded parts made from Selenis Flow 67 are water-clear and glossy, whilst virtually unbreakable. Selenis Flow 67 features excellent impact strength and good chemical resistance. Fast injection cycles are possible due to high flowability. Thanks to Selenis Flow 67 high dimensional stability, multiple parts products may be assembled with snap-fit connectors, maintaining the strength required to sustain daily wear and tear. Selenis Flow 67 is a ready-to-use product supplied with a demoulding agent to ease your process.

This data represents typical values that have been calculated from all products classified as: Generic PETG This information is provided for comparative purposes only.

Selenis Genius 250 copolyester has been specifically developed for extrusion blow moulding process of bottles of any shape. Selenis Genius 250 offers exceptional clarity, neutral colour and high gloss, granting enhanced shelf appeal whilst protecting product ingredients. Selenis Genius 250 grade is especially recommended for the production of containers with a volume up to 125 ml, allowing for production of small batches with good economics. Selenis Genius 250 grade may be easily processed on standard extrusion blow moulding machines, provided appropriate drying equipment is used. Selenis Genius 250 offers good chemical resistance to most common additives used in the cosmetics and personal care industries; it is up to the end user to determine the fitness for use.

Selenis Genius 251 Plus copolyester has been specifically developed for extrusion blow moulding process of bottles of any shape. Selenis Genius 251 Plus offers exceptional clarity, neutral colour and high gloss, granting enhanced shelf appeal whilst protecting product ingredients. Selenis Genius 251 Plus grade offers excellent impact resistance, and improved melt strength; therefore, it is recommended for the production of bottles with a volume up to 3 liters. Selenis Genius 251 Plus grade may be easily processed on standard extrusion blow molding machines, provided appropriate drying equipment is used. Selenis Genius 251 Plus offers good chemical resistance to most common additives used in the cosmetics and personal care industries; it is up to the end user to determine the fitness for use.

Selenis Genius 251 copolyester has been specifically developed for extrusion blow moulding process of bottles of any shape. Selenis Genius 251 offers exceptional clarity, neutral colour and high gloss, granting enhanced shelf appeal whilst protecting product ingredients. Selenis Genius 251 grade offers excellent impact resistance; therefore it is recommended for the production of bottles with a volume up to 1000-ml. Selenis Genius 251 grade may be easily processed on standard extrusion blow moulding machines, provided appropriate drying equipment is used. Selenis Genius 251 offers good chemical resistance to most common additives used in the cosmetics and personal care industries; it is up to the end user to determine the fitness for use.

Selenis Geo LF 451 is a polymer that has been designed for high performance monofilament extrusion and fiber extrusion. This product's extended life-span performance and durability makes it unique and the ideal choice for geo-textiles applications. Selenis Geo LF 451 has a very high viscosity, delivering excellent melt strength when extruded. Its low creep characteristic ensures an extended life-span performance and guarantees durability. The inert polyester characteristics deliver a high resistance against biological and chemical attack.

PTM112532

ICORENE® N9203 is a clear, tough, amorpheus copolyester material (PETG). This grade is useful for credit cards, device packaging, household products and food packaging applications.

Jabil Engineered Materials PETg 0800 ESD is an easy processing, electrostatic dissipative (ESD) product for printing parts that require protection from electrostatic discharge. This product has high strength and stiffness with a good balance of properties in XY and Z directions and the added benefit of ESD for jigs, fixtures and tooling that needs to safely handle electronic components. Advantages Applications include jigs, fixtures and tooling, housings and components where permanent static dissipation is required. Produces tough parts with excellent surface quality and minimal warp.

Jabil Engineered Materials PETg is an easy processing, standard product for printing jobs requiring good strength and stiffness with a good balance of properties in XY and Z directions. Applications include housings; jigs, fixtures and tooling; and general printing. This material has a print profile available on Ultimaker Cura Marketplace and produces excellent surface quality parts that can be printed at max speeds with minimal shrinkage. Advantages Easy printability, low shrinkage and warpage, good continuous-use temperature and very consistent lot-to-lot print properties with a ISO 9001 Certificate of Analysis with every spool.

Selenis Kitxen CD 500 is a copolyester specifically developed for kitchenwear application. This resin is suitable from thin wall and intricate parts to thicker cross-sections where toughness, superior transparency and blue edge effect are required. Injection moulded bins made from Selenis Kitxen CD 500 are water-clear and glossy, whilst tough and durable. Thanks to Selenis Kitxen CD 500 high dimensional stability, multiple parts products may be assembled with snap-fit connectors, maintaining the strength required to sustain daily wear and tear. Selenis Kitxen CD 500 is an economical and innovative solution when compared to PMMA, polystyrene and PC, whilst maintaining superior product performance in terms of transparency and endurance. Selenis Kitxen CD 500 is BPA and chlorine free.

Polycasa LENTICULAR is a range of extruded Polyethyleneterephthalate Glycol (PETG) sheets from Polycasa, specially created for lenticular use. This dynamic technology leads to unique opportunities to create dramatic multi-imaging visual effects including displaying before and after images; making a logo or product jump out of the page; showing animation or action video sequences; adding 3D to a graphic or typography; and morphing one image into a completely different one. Polycasa LENTICULAR comes in a range of three grades, with LPIs ranging from 60LPI, 75LPI and 100LPI, making it suitable for all kinds of standard and special format applications. It's ideal for the promotional, packaging and point of purchase display industries. CHARACTERISTICS - Brilliant clarity. - Excellent ink adhesion. - Stable sheet dimensions. - High-impact strength. - Good chemical resistance. - Environmentally safe. - Recyclable. - Meets current food contact legislation. APPLICATIONS - Advertisements. - Brochures and flyers. - Displays and posters. - Packaging. - Business cards. - Covers for CDs, DVDs and books. - Promotional gifts. COMPLIANCE - SVHC (Substances of Very High Concern). - REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). - FDA (Food & Drug Administration).

Polycasa LENTICULAR is a range of extruded Polyethyleneterephthalate Glycol (PETG) sheets from Polycasa, specially created for lenticular use. This dynamic technology leads to unique opportunities to create dramatic multi-imaging visual effects including displaying before and after images; making a logo or product jump out of the page; showing animation or action video sequences; adding 3D to a graphic or typography; and morphing one image into a completely different one. Polycasa LENTICULAR comes in a range of three grades, with LPIs ranging from 60LPI, 75LPI and 100LPI, making it suitable for all kinds of standard and special format applications. It's ideal for the promotional, packaging and point of purchase display industries. CHARACTERISTICS - Brilliant clarity. - Excellent ink adhesion. - Stable sheet dimensions. - High-impact strength. - Good chemical resistance. - Environmentally safe. - Recyclable. - Meets current food contact legislation. APPLICATIONS - Advertisements. - Brochures and flyers. - Displays and posters. - Packaging. - Business cards. - Covers for CDs, DVDs and books. - Promotional gifts. COMPLIANCE - SVHC (Substances of Very High Concern). - REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). - FDA (Food & Drug Administration).

Polycasa LENTICULAR is a range of extruded Polyethyleneterephthalate Glycol (PETG) sheets from Polycasa, specially created for lenticular use. This dynamic technology leads to unique opportunities to create dramatic multi-imaging visual effects including displaying before and after images; making a logo or product jump out of the page; showing animation or action video sequences; adding 3D to a graphic or typography; and morphing one image into a completely different one. Polycasa LENTICULAR comes in a range of three grades, with LPIs ranging from 60LPI, 75LPI and 100LPI, making it suitable for all kinds of standard and special format applications. It's ideal for the promotional, packaging and point of purchase display industries. CHARACTERISTICS - Brilliant clarity. - Excellent ink adhesion. - Stable sheet dimensions. - High-impact strength. - Good chemical resistance. - Environmentally safe. - Recyclable. - Meets current food contact legislation. APPLICATIONS - Advertisements. - Brochures and flyers. - Displays and posters. - Packaging. - Business cards. - Covers for CDs, DVDs and books. - Promotional gifts. COMPLIANCE - SVHC (Substances of Very High Concern). - REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). - FDA (Food & Drug Administration).

Polycasa LENTICULAR is a range of extruded Polyethyleneterephthalate Glycol (PETG) sheets from Polycasa, specially created for lenticular use. This dynamic technology leads to unique opportunities to create dramatic multi-imaging visual effects including displaying before and after images; making a logo or product jump out of the page; showing animation or action video sequences; adding 3D to a graphic or typography; and morphing one image into a completely different one. Polycasa LENTICULAR comes in a range of three grades, with LPIs ranging from 60LPI, 75LPI and 100LPI, making it suitable for all kinds of standard and special format applications. It's ideal for the promotional, packaging and point of purchase display industries. CHARACTERISTICS - Brilliant clarity. - Excellent ink adhesion. - Stable sheet dimensions. - High-impact strength. - Good chemical resistance. - Environmentally safe. - Recyclable. - Meets current food contact legislation. APPLICATIONS - Advertisements. - Brochures and flyers. - Displays and posters. - Packaging. - Business cards. - Covers for CDs, DVDs and books. - Promotional gifts. COMPLIANCE - SVHC (Substances of Very High Concern). - REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals). - FDA (Food & Drug Administration).

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gauge sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge colour are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gauged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.