Homo PP for Extrusion Application Extruded elongation, Monofilament, Rope, Band Characteristics Excellent processability

Homo PP for Extrusion Application Extruded elongation, Monofilament, Rope, Band Characteristics Excellent processability

Homo PP for Extrusion Application Extruded elongation, Monofilament, Rope, Band Characteristics Excellent processability

H1002NA is a nucleated homopolymer resin designed for thermoforming and extrusion blow molding applications and contains an antistat. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H1003N is a nucleated homopolymer resin designed for thermoforming and extrusion blow molding applications. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H3003 is a homopolymer resin designed for metallization and high-speed BOPP applications. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H3010SB is a homopolymer resin designed for tubular water quenched film applications and is formulated with slip and anti-block for improved optics. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H3209 is a high clarity, narrow molecular weight homopolymer resin designed for cast film applications. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H5025G is a homopolymer resin designed for fiber and multi-filament applications with an anti-gas fading formulation. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H5103 is a homopolymer resin designed for raffia and fiber applications requiring low water carry over. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H5104 is a homopolymer resin designed for raffia and fiber applications requiring low water carry over. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H5104A is a homopolymer resin designed for raffia and fiber applications requiring low water carry over and antistat. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H5235G is a narrow molecular weight homopolymer resin designed for spunbond applications with an anti-gas fading formulation. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7012 is a homopolymer resin designed for masterbatch, consumer and housewares applications. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7020S is a homopolymer resin designed for caps and closures applications requiring antistat. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7035 is a homopolymer resin designed for injection molding applications requiring low taste and odor. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7035N is a nucleated homopolymer resin designed for injection molding applications. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7050E is a nucleated homopolymer resin with low taste and odor designed for injection molding applications with fast cycle times, requiring anti-stat. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

H7060E is a nucleated homopolymer resin with low taste and odor designed for injection molding applications requiring anti-stat. - Meets FDA regulation 21 CFR 177.1520 section (c)1.1a for Conditions of Use A-H. - Compliant with REACH and CSA.

This concentrate contains high purity talc in a polypropylene homopolymer. It was formulated specifically for thermoformed sheet applications and is compatible with a wide range of polypropylene types for improving stiffness and heat deflection. Suitable Applications: thermoformed sheet injection molding Environmentally Beneficial Talc is a plentiful, natural mineral and can be used to effectively displace a significant portion of the petrochemical based component in the targeted application. The improved productivity and the lower energy consumption awarded by using our concentrates all help to minimize the carbon footprint of the end product. Regulatory Compliance The ingredients in our concentrates are approved for use in direct food contact packaging and are heavy metals free making them compliant with regulations such as California Proposition 65 and CONEG.

"Hifax" AA36H conventional melt flow, 1,400 MPa flexural modulus, UL 94 V-2 flame retardant polypropylene homopolymer resin has an excellent combination of properties and processability. It was designed for applications that require flame and heat resistance, along with good electrical properties and surface quality.

"Hifax" AA56H medium high melt flow, 1,400 MPa flexural modulus, UL 94 V-2 flame retardant polypropylene homopolymer resin has an excellent combination of properties and processability. It was designed for applications that require flame and heat resistance, along with good electrical properties and surface quality.

Hifax HKC 426P BLACK is a 22% talc filled PP homopolymer, with high stiffness and high UV resistance. Product is available in black color, pellet form.

Hifax HKG 418P C1V301 is a 20% glass fiber reinforced PP homopolymer, with high stiffness and high UV resistance. Product is available as a customized color matched, pellet form. This grade is delivered in C1V301 color version.

Hifax HKG 418P is a 20% glass fiber reinforced PP homopolymer (coupled). It combines excellent stiffness properties with good dimensional stability and low creep under load at elevated temperatures. This grade is UV-stabilized for automotive exterior parts. The grade is available in colour-matched (dark colours), pellet form.

"Hifax" M2 U13 is a 20% mineral filled polypropylene homopolymer. The product is designed for Auto exterior applications and is available in black colour.

Hifax X M2 U16 is a 20% talc filled PP homopolymer compound, with outstanding stiffness, good flowability and very good UV resistance. This product is also available in other colors, new colors can be developed depending on customer requirements.

Hifax X M2 U16 is a 20% talc filled PP homopolymer, with outstanding stiffness, good flowability and very good UV resistance. This grade is delivered in customer customized colors, this Data Sheet is giving general properties, some of them may be slightly altered upon color selected.

Hifax X M2 U16 is a 20% talc filled PP homopolymer compound, with outstanding stiffness, good flowability and very good UV resistance. This product is also available in other colors, new colors can be developed depending on customer requirements.

Hifax X M2 U16 is a 20% mineral filled, polypropylene grade for injection molding. The grade features very high stiffness and good scratch resistance. The grade has good UV resistance designed for outdoor applications. Typical customer applications are cowl vent grills. The grade is available in colored, pellet form.

HIPOLEN P EH 7 is very low flow homopolymer with excellent resistance to organic solvents and very low moisture absorption rate. Grade EH 7 is designed for extrusion processes which demand high melt strength and enhanced processing stability. Advantages of end use products are high heat-ageing stability, good extraction stability and high chemical and corrosion resistance. Pipes and fittings made from EH are intended for transfer of hot liquids or gases at normal and medium pressures. Applications - Pipes for long-term usage at normal and higher temperature applications, such as drinking water and drain pipes - Related fittings - Rods, profiles - Mono- and multilayer sheets - Sheets for cladding work surfaces in industry

HIPOLEN P EH 71 is low flow homopolymer with excellent resistance to organic solvents and very low moisture absorption rate. Grade EH 71 is designed for extrusion processes which demand high melt strength and enhanced processing stability. Advantages of end use products are high heat-ageing stability, good extraction stability and high chemical and corrosion resistance. Pipes and fittings made from EH 71 are intended for transfer of hot liquids or gases at normal pressures. Applications - Pipes for long-term usage at normal and higher temperature applications, such as drinking water and drain pipes - Related fittings or pipes installation - Rods, profiles - Mono- and multilayer sheets

HIPOLEN P FB 4T is medium flow, nucleated polypropylene homopolymer with improved optical properties. Grade FB 4T is designed for sheet extrusion processes with enhanced processing stability for multiple-pass recycling. Packages made from FB 4T have high transparency and surface goss. This grade comply with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - High transparency thermoformed packages - Dairy cups and containers - Cups for water and cofee vending machines - Trays for sweet-meats and other foodstuffs

HIPOLEN P FL 6C is medium flow homopolymer designed for production of bi-axially oriented films. The products have good mechanical, optical and barrier properties. FL 6C has enhanced processing stabilization.. HIPOLEN P FL 6C complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Film for food, flower, textile and tobacco products packaging - Film for metallization and lacquering - Adhesive tapers, laminates

HIPOLEN P FY 5 is medium flow homopolymer with a good balance between melt strength and production rate. Grade FY 5 is designed for extrusion of flat and tubular films, intended for conversion into lighter denier stretched tapes, ranging from 1200 to 1300 dtex. End use products have high tensile properties and very consistent shrinkage behavior after processing. Yarn from stretched tapes is used in the place of more classic vegetable fibers, like sisal, hemp and jute. Applications - Film tapes and textile yarn from flat or blown film - Carpet backing, indus rial heavy duty fabrics and mats - Woven bags - Mono filament for brush, broom and different technical application

HIPOLEN P FY 6 is low flow homopolymer with a good balance between melt strength and production rate. Grade FY 6 is designed for extrusion of flat and tubular films, intended for conversion into stretched tapes for high denier yarn (3300-30000_dtex). End use products have high tensile properties and very consistent shrinkage after processing. Yarn from stretched tapes is used instead of more classic vegetable fibers, like sisal, hemp and jute. Applications - Tapes and yarn from flat or blown film - Baler and packaging twines, ropes - Industrial heavy duty fabrics and mats - Woven bags

HIPOLEN P MA 1 is very high flow homopolymer with narrow molecular weight distribution, intended for fast cycle injection molding. Grade MA 1 provides excellent processability in production of thin-wall articles. End products have improved characteristics, such as low consistent shrinkage and high stiffness. HIPOLEN P MA 1 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Thin-wall products for various applications - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 2 is very high flow homopolymer with narrow molecular weight distribution intended for fast cycle injection molding. Grade MA 2 provides excellent processability and good part densification. End products have improved characteristics, such as low consistent shrinkage and uniform mechanical properties. HIPOLEN P MA 2 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Parts for various appliances and furniture - Household goods - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 21 is very high flow homopolymer with narrow molecular weight distribution, intended for fast cycle injection molding. Grade MA 21 provides excellent processability in production of thin-wall articles. End products have improved characteristics, such as low consistent shrinkage and high stiffness. HIPOLEN P MA 21 complies with European Commission Regulation (EU) 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Thin-wall products for various applications - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 3 is high flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 3 provides excellent processability and good part densification. End products have improved characteristics, consistent shrinkage, uniform mechanical properties and excellent resistance to stress-cracking agents. Applications - Parts for various appliances and furniture - Household goods - Toys - Caps and closures