Polypropylene (PP): PP Homopolymer
Product | Availability | Product Description |
---|---|---|
HIPOLEN P® MA 31 | Africa & Middle East |
HIPOLEN P MA 31 is general purpose high melt flow homopolymer with narrower molecular weight distribution. This grade is designe for injection molding of consumer articles, providing faster cycles and improved dimensional properties of end products. Grade MA 31 is also intended for production of additive and pigment master batches, for compounding with mineral fillers and wood particles, as well as for production of reinorced composites.
Applications
- Injection molding of various articles for one-shot using
- Polymer component for Production of master batches
- Polymer component for illed and reinforced composites
|
HIPOLEN P® MA 4 | Africa & Middle East |
HIPOLEN P MA 4 is medium flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 4 is designed for medium speed injection processes. This polimer provides excellent balance of end product excellent characteristics, relatively high impact and creep properties, good surface quality and dimensional stabiity.
Applications
- Parts for various appliances and furniture
- Household goods
- Toys
- Caps and closures
|
HIPOLEN P® MA 41 | Africa & Middle East |
HIPOLEN P MA 41 is medium flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 41 is designed for medium speed injection processes. This polymer provides excellent balance of end product key characteristics, such as relatively high impact and creep properties, good surface quality and dimensional stability.
Applications
- Parts for various appliances and furniture
- Household goods
- Toys
- Caps and closures
|
HIPOLEN P® TA 3 | Africa & Middle East |
HIPOLEN P TA 3 is medium molecular weight distribution homopolymer intended for staple fibers manufacture. This polymer can be used also for CF and BCF multifilament production at medium-higher spinning speeds. Grade TA 3 is stabilized with general formulation which provides constant flow and high process stability. HIPOLEN P TA 3 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs.
Applications
- Medium denier staple fibers for carpeting and upholstery
- CF and BCF multifilament for woven applications
- Thermally bonded and needle-woven nonwovens
- Insulation material and staple fibers for filters and other technical fabrics
- Cast film for packaging
|
HIPOLEN P® TM 2G | Africa & Middle East |
HIPOLEN P TM 2G is high flow homopolymer with narrow molecular weight distribution, intended for continuous multifilament manufacture. The molecular structure provides excellent stability and uniform flow of the polymer melt at high speeds spinning of fibers. End use products have high color stability (antigasfading) and medium UV resistance.
Applications
- CF and BCF multifilament for carpets
- Woven and non-woven multifilament for packages and various articles for automotive industry
|
HIVAL® PP HP 24007 | North America | |
HIVAL® PP HP 2403 | North America | |
HIVAL® PP HP 2403LW | North America | |
HIVAL® PP HP 2405 | North America | |
HIVAL® PP HP 2405AS | North America | |
HIVAL® PP HP 2412 | North America |
Suggested Applications
Rigid Thin-Walled Containers, Sports & Leisure, Toys, Housewares, Molded Caps & Closures
|
HIVAL® PP HP 2420 | North America |
Suggested Applications
Rigid Thin-Walled Containers, Sports & Leisure, Toys, Housewares, Molded Caps & Closures
|
HIVAL® PP HP 2420NA | North America |
Suggested Applications
Rigid Thin-Walled Containers, Sports & Leisure, Toys, Housewares, Molded Caps & Closures
|
HIVAL® PP HP 2435 | North America |
Suggested Applications
Rigid Thin-Walled Containers, Sports & Leisure, Toys, Housewares, Molded Caps & Closures
|
HIVAL® PP HP 2435NA | North America |
Suggested Applications
Rigid Thin-Walled Containers, Sports & Leisure, Toys, Housewares, Molded Capes & Closures
|
Hostacom 1103 2003 (SC BLACK) | Asia Pacific |
Hostacom 1103 2003 is a 20% talc filled PP homopolymer, with medium melt flow rate, good stiffness, and good thermal resistance. Product is available as non color matched, black, pellet form.
|
Hostacom 5106 BLACK | Asia Pacific |
Hostacom 5106 BLACK is a 15% glass fiber reinforced PP homopolymer, with low melt flow rate. Product is available as non color matched, black, pellet form.
|
Hostacom 5106 NATURAL | Asia Pacific |
Hostacom 5106 NATURAL is a 15% glass fiber reinforced PP homopolymer, with low melt flow rate.
|
Hostacom 5340 D T 2 S | Europe |
Hostacom 5340 D T 2 S is an over 40% natural filler PP homopolymer, with medium melt flow rate, good impact/stiffness balance and good rigidity. The product is available as natural, pellet form. This grade is not intended for medical, pharmaceutical, food, drinking water and all applications not listed in the supported list. For more information please contact our sales representatives.
|
Hostacom 5340 D T 2 | Europe |
Hostacom 5340 D T 2 is an over mineral filled PP homopolymer, with medium melt flow rate. This grade is not intended for medical, pharmaceutical, food and drinking water applications.
|
Hostacom 62F4-2C | Africa & Middle East |
Hostacom 62F4-2C high melt flow, 1,900 MPa flexural modulus, precolored, 20% talc-filled polypropylene homopolymer has excellent heat aging characteristics, high chemical resistance and easy processability.
|
Hostacom 6551 | Africa & Middle East |
Hostacom 6551 conventional melt flow, 1,300 MPa flexural modulus, precolored polypropylene homopolymer has a good combination of strength, stiffness, impact and heat resistance. It was designed for a variety of industrial and consumer applications.
|
Hostacom 65F4-2 | Africa & Middle East |
Hostacom 65F4-2 conventional melt flow, 1,900 MPa flexural modulus, 20% talc-filled polypropylene homopolymer is designed for balanced stiffness, impact resistance, dimensional stability, colorability and heat aging performance.
|
Hostacom 65F4-3 | Africa & Middle East |
Hostacom 65F4-3 conventional melt flow, 2,200 MPa flexural modulus, 30% talc-filled polypropylene homopolymer is designed for high heat stability, high rigidity, excellent chemical resistance and improved surface quality of molded parts.
|
Hostacom 65F4-4C | North America |
Hostacom 65F4-4C conventional melt flow, 2,900 MPa flexural modulus, precolored, 40% talc-filled polypropylene homopolymer is designed for maximum stiffness, good dimensional stability and excellent heat aging performance.
|
Hostacom 65F5-2 | Africa & Middle East |
Hostacom 65F5-2 conventional melt flow, 1,500 MPa flexural modulus, 20% calcium carbonate-filled polypropylene homopolymer is designed for high stiffness, excellent chemical resistance and improved surface quality of molded parts.
|
Hostacom 65F5-4 | Africa & Middle East |
Hostacom 65F5-4 conventional melt flow, 2,200 MPa flexural modulus, 40% calcium carbonate- filled polypropylene homopolymer is designed for high stiffness, excellent chemical resistance and improved surface quality of molded parts.
|
Hostacom 6652 | North America |
Hostacom 6652 low melt flow, 1,650 MPa flexural modulus polypropylene homopolymer has high strength, excellent impact resistance and good hydrolytic stability.
|
Hostacom 68F4-3 | Africa & Middle East |
Hostacom 68F4-3 fractional melt flow, 3,400 MPa flexural modulus, 30% talc-filled, blow molding and extrusion grade polypropylene homopolymer is designed for high strength, stiffness, impact resistance and processability.
|
Hostacom AE716BC | Africa & Middle East |
Hostacom AE716BC conventional melt flow, 1,400 MPa flexural modulus, UV-stabilized, 40% calcium carbonate-filled polypropylene homopolymer has a good balance of properties and processing. It was designed to meet UL 746B (F1) requirements for outdoor applications.
|
Hostacom AJ 1165 E BLACK | Europe |
Hostacom AJ 1165 E BLACK is a 30 % chemically coupled, glass fiber reinforced PP homopolymer, with medium melt flow rate, high rigidity, good impact resistance and excellent impact/stiffness balance. The product is available in black color, pellet form.
|
Hostacom D1124 0001 | Europe |
Hostacom D1124 0001 is a 20% mineral filled PP homopolymer, with good surface appearance and good LTHS (long term heat stability). FDA approva/DMF registration under file N°13038. Medical and drinking water applications on request. This grade is delivered in Natural color version.
|
Hostacom ERD739T | North America |
Hostacom ERD739T black, 15% mica-filled, modified polypropylene homopolymer has a good balance of properties and processability. It was designed primarily for various automotive underhood components.
|
Hostacom FPP 20 GFC | Africa & Middle East |
20% chemical coupled glass fiber reinforced PP-Homopolymer. Former name: Polyfort FPP 20 GFC
|
Hostacom FPP 22T K1093 LE | Africa & Middle East |
22% mineral filled PP homopolymer, heat stabilized
Former name: Polyfort FPP 22T K1093 REC
|
Hostacom FPP 22T K1093 | Africa & Middle East |
22% talc filled PP-Homopolymer with long term heat stabilization, low emissions
Former name: Polyfort FPP 22T K1093
|
Hostacom FPP 30 GFC HI | Africa & Middle East |
High impact 30% glass fibre reinforced PP-Homopolymer, chemically coupled
Former name: Polyfort FPP 30 GFC HI
|
Hostacom FPP 30 GFC K1041 | Africa & Middle East |
30% glass fiber reinforced PP-Homopolymer chemically coupled
Former name: Polyfort FPP 30 GFC K1041
|
Hostacom FPP 30 GFC K1079 LW | Africa & Middle East |
30 % glass fibre reinforced PP-Homopolymer, long term heat stabilized, low emission, laser weldable
Former name: Polyfort FPP 30 GFC K1079 LW
|
Hostacom FPP 30 GFC K1079 | Africa & Middle East |
30 % glass fibre reinforced PP-Homopolymer, long term heat stabilized, low emission.
Former product name: Polyfort FPP 30 GFC K1079
|