Epoxy: エポキシ
製品 | 可用性 | 製品の説明 |
---|---|---|
Devcon High Performance Backing Compound | 北アメリカ |
High-strength liquid epoxy with the necessary resiliency and strength to withstand forces generated by crushers and mills.
Intended Use:
- Rod, ball, pebble, and autogenous mills; cone and gyratory crushers
Product Features:
- 100% solids - no solvents
- High compression and impact strength
- Negligible shrink
- Easy to pour; easy to use
- Low exothermic reaction
|
Devcon HP 250 | 北アメリカ |
High performance epoxy with high shear strength and impact toughness for structural assembly applications.
Intended Use:
- Bonds metals, FRP/SMC composites,phenolics, stainless steel, aluminum, vinyl esters, nylon, PVC,PC,styrenics, wood, and rigid plastics.
Product Features:
- Non-corrosive/outstanding chemical resistance
- Excellent salt spray durability
|
Devcon HV Tile Adhesive | 北アメリカ |
High-strength towelable adhesive compound designed for bonding ceramic tile to vertical, curved and overhead surfaces and repariing ceramic tile surfaces.
Intended Use:
- Bonding ceramic tle to vertical, curved and overhead surfaces.
Product Features:
- Non-sagging adhesive that will support 4 lbs. per square foot while curing
- Fills gaps and joints in crushers prior to pouring backing compounds
- Excellent adhesion to metal, ceramic and concrete
- Easy to use 1:1 formula
|
Devcon Korrobond 95 | 北アメリカ |
Korrobond 95 is a two-component epoxy based backing compound and damping material for stone crushers. It serves as a backing and reinforcing layer between machine parts and as a damper when subjected to impact and shock loads.
Features:
- Very high compressive strength
- 100% Solids, no solvents, minimum shrinkage
- Easy to mix and pour
- High impact strength and resilience
- Ideal for extremely cold environments
|
Devcon Metal Welder™ | 北アメリカ |
Fast curing 10:1 methacrylate adhesive designed for structural bonding of metals without primers. The system requires little to no surface preparation or primers.
Intended Use:
- Structural bonding of aluminum, steel, and stainless steel, along with bonding thermoplastic and composite assemblies.
Features:
- Excellent environmental resistance
- Low odor technology
- Bonds dissimilar substrates
- Excellent impact, peel, and shear resistance
- Beads in activator for proper bond line thickness
|
Devcon Plastic Steel Putty (A) | 北アメリカ |
A steel-filled epoxy putty that cures at room temperature and is designed for filling, rebuilding, and bonding metal surfaces.
Intended Use:
- Patching and repairing areas where welding or brazing would be undesirable or impossible
Product features:
- Applies easily to vertical surfaces
- Machinable to metallic finish
- Bonds to aluminum, concrete, and many other metals
- Resistant to chemicals and most acids, bases, solvents, and alkalis
|
Devcon Plastic Steel® 5-Minute® Putty (SF) | 北アメリカ |
A steel-filled, fast-setting epoxy putty for filling, rebuilding, and bonding metal surfaces.
Intended Use:
- Restores worn or fatiqued metals; patches castings; makes jigs and fixtures; rebuilds pump and valve bodies; restores bearing journals and races
Product features:
- Bonds to aluminum, concrete, and many other metals
- Resistant to chemicals and most acids, bases, solvents, and alkalis
- Applies easily to vertical surfaces
- Machinable to metallic finish
|
Devcon Plastic Steel® Liquid (B) | 北アメリカ |
A steel-filled, liquid epoxy designed for maintaining and/or repairing tooling, mold-making, and leveling equipment.
Intended Use:
- Holding fixtures for intricate parts; filling and leveling equipment; repairing hard-to-reach areas where a flowable epoxy is needed; duplicating or tracing masters; short run dies and molds
Product features:
- Low viscosity, self-leveling liquid
- Castable
- Low shrinkage
- Machinable to metallic finish
|
Devcon Plastic Welder™ II | 北アメリカ |
A 100% reactive, toughened structural acrylic adhesive formulated for bonding difficult-to-bond substrates such as nylon-based alloys, epoxy composites, and modified polyesters.
Intended Use:
- Bond: PVC, fiberglass, ABS, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, Nylon, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Features:
- Room temperature cure
- Bonds dissimilar substrates
- Excellent environmental resistance
- Minimal surface preparation
- Non-sagging formula
- Excellent chemical resistance
- Excellent impact, peel, and shear resistance
|
Devcon Plastic Welder™ White | 北アメリカ |
Toughened structural adhesive, after curing, produces superior strength load-bearing bonds to engineered plastics.
Intended Use:
- Bond: PVC, fiberglass, ABS, FRT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Features:
- Minimal surface preparation
- Room temperature cure
- 1:1 mix ratio
- Rapid fixture in thin set
- Non-sagging formula
|
Devcon Plastic Welder™ | 北アメリカ |
Toughened structural adhesive, after curing, produces superior strength to load-bearing bonds to engineered plastics.
Intended Use:
- Bond: PVC, fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.
Features:
- Minimal surface preparation
- Room temperature cure
- 1:1 mix ratio
- Rapid fixture in thin set
- Non-sagging formula
|
Devcon Stainless Steel Putty (ST) | 北アメリカ |
A stainless steel-filled epoxy for rebuilding and repairing stainless steel equipment.
Intended Use:
- Repairs cracks, dents, and breaks in stainless steel machinery or castings; rebuilds dairy equipment; repairs stainless steel holding tanks
Product features:
- Acceptable for use in meat and poultry plants
- Machinable to metallic finish
- NSF® Approved (Certified to ANSI/NSF61)
- Resistant to chemicals and most acids, bases, solvents, and alkalis
|
Devcon Titanium Putty | 北アメリカ |
High-tech, titanium-reinforced epoxy putty engineered for making critical repairs to machinery and precision parts.
Intended Use:
- Restore bearing housings and scored shafts; rebuild wear rings, hydraulic rams, and valves; repair equipment and parts that require a machined finish
Product features:
- High compressive strength
- Temperature resistance to 350°F
- Resistant to chemicals and most acids, bases, solvents, and alkalis
|
Devcon Ultra Quartz™ | 北アメリカ |
A heavy-duty, premium floor patching system (includes primer)
Intended Use:
- Used to repair concrete in chemical environments where heavy concentrations of acids, alkalais, and hydrocarbons are destroying the floor. Ideal for rebuilding floors around acid dip tanks, pump pads, and secondary containment areas.
Product features:
- Trowelable to a non-porous finish
- 9000 psi compression strength
- Superior adhesion to cured concrete
- Non-sag formulation
- Outstanding resistance to acids, alkalis, water, oils, solvents, chemicals
|
Devcon Underwater Repair Putty (UW) | 北アメリカ |
Makes (effective) repairs to metal, concrete, wood surfaces in wet and dry environments.
Intended Use:
- Repairing and refitting pipes, valves, pumps, and tanks. Repair concrete vessels and piping in wet environments. This product will bond to a wet or damp surface.
Product features:
- Bonds to aluminum, concrete, and many other metals
- Bonds to ferrous and non-ferrous metals
- Non-rusting
- Bonds to wet surfaces
- Bonds, patches, and seals metals
- Non-sagging
|
Devcon Wear Guard™ Fine Load | 北アメリカ |
High-density, micro-alumina ceramic bead-filled epoxy system for protecting equipment that handles particulate smaller than 1/8"
Intended Use:
- Dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyors
Product Features:
- Services temperatures to 300°F
- Trowelable to a smooth surface
- Outstanding resistance to a wide range of chemicals
|
Devcon Wear Guard™ High Impact | 北アメリカ |
High density, micro alumina ceramic bead-filled epoxy system with urethane acyrlate for superior impact abrasion used for protecting equipment against tremendous impact and flex.
Intended Use:
- High impact applications in pumps, scrubbers, screens, chutes, handling equipment and screw conveyers
Product Features:
- Extremely wear resistant
- Non-sagging putty, creamy paste
- High compression and impact strength
- Services temperatures to 300°F
|
Devcon Wear Guard™ High Load | 北アメリカ |
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8"
Intended Use:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes; recontour chippers, bins, hoppers, bunkers, separators, diester tables; protect exhausters, chutes, launderers, housing fans, crushers, and breakers
Product Features:
- Outstanding resistance to a wide range of chemicals
- Services temperatures to 300°F
- Non-sagging
|
Devcon Wear Guard™ High Temp 450 | 北アメリカ |
High-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in high-temperature applications
Intended Use:
- Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes; recontour chippers, bins, hoppers, bunkers, separators, diester tables; protect exhausters, chutes, launderers, housing fans, crushers, and breakers.
Product Features:
- Provides up to 30% better abrasion resistance than conventional wear compounds
- Unmatched resistance to acids, bases, salts, and solvents
- Services temperatures to 450°F
- Excellent adhesion to metal, ceramic, and concrete
|
Devcon Wear Guard™ Ultra | 北アメリカ |
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions.
Intended Use:
- Repair scrubbers, ash handling systems, pipe elbows, screens and ceramic lined chutes; recontour chippers, bins, hoppers, bunkers, separators; protect exhausters, chutes, launders, housing fans, crushers and breakers.
Product Features:
- Extends Equipment Operating Cycles
- Epoxy Primer FC included (For use as primer)
- Non-sagging
- Outstanding Wear Resistance
|
Devcon Wear Resistant Putty (WR-2) | 北アメリカ |
A ceramic-filled epoxy putty with a smooth, low-friction finish.
Intended Use:
- For repairing flange faces, machine ways, valve seats and bodies, and tracing guides
Product features:
- Rebuilds and protects interfacing metal surfaces
- Protects metal from bi-metallic corrosion
- Repairs metals and concrete
|
Devcon Zip Patch | 北アメリカ |
A fast-setting patch system for making permanent, waterproof field repairs.
Intended Use:
- Patching PVC/ABS piping, tanks, vessels, and containers. Repairing all substrates with a 1 hour functional cure.
Product Features:
- Low odor technology
- Room temperature cure
- Non-sagging formula
- Bonds dissimular substrates
- Minimal surface preparation
- Strong adhesion
|
D-MEC SCR11120 | アジア太平洋地域 |
Characteristics: Crystal clear
Laser: Solid-state
Post-cure: Not needed
|
D-MEC SCR701 | アジア太平洋地域 |
Characteristics: General use, moisture resistant
Laser: Ar/solid-state
Post-cure: Not needed
|
D-MEC SCR710 | アジア太平洋地域 |
Characteristics: High toughness
Laser: Ar/solid-state
Post-cure: Not needed
|
D-MEC SCR735 | アジア太平洋地域 |
Characteristics: High heat resistance, high toughness
Laser: Solid-state
Post-cure: Not needed /or heating
|
D-MEC SCR740 | アジア太平洋地域 |
Characteristics: Ultra-high heat resistance
Laser: Solid-state
Post-cure: Heating
|
D-MEC SCR751 | アジア太平洋地域 |
Characteristics: General use, moisture resistant
Laser: He-Cd
Post-cure: Not needed
|
D-MEC SCR802 | アジア太平洋地域 |
Characteristics: For direct mold
Laser: Ar/solid-state
Post-cure: Heating
|
D-MEC SCR9100 | アジア太平洋地域 |
Characteristics: Ultra-high toughness
Laser: Solid-state
Post-cure: Not needed
|
D-MEC SCR9120 | アジア太平洋地域 |
Characteristics: Ultra-high toughness
Laser: Solid-state
Post-cure: Not needed
|
Ebaboard EP 138 | アジア太平洋地域 |
Applications
- Prepreg tooling
- Master models for prepreg tools
- Moulds and tools for composites
- Vacuum forming tools
Properties
- very low coefficient of linear expansion
- very high heat resistance
- very fine surface structure
- very good dimension stability
- low generation of dust during machining
|
Ebacryl coupling paste / TGL | アジア太平洋地域 |
Applications
- Coupling paste for epoxy gel coats
Properties
- high heat resistance
|
Ebacryl O-1 / SP-1 | アジア太平洋地域 |
Applications
- gel coat for hand laminating
- Negatives
- fixtures
- Scenery for theater
- Supporting shells for heat treatment
- Supporting for laser cutting
- supporting shells
- Negative shells of clay models
Properties
- free shrinkage
- low thermal expansion
- low exothermic character
- tools can be washed with water
- no health and safety problem
|
Ebalta Adhesive 552 | アジア太平洋地域 |
Applications
- Bonding of epoxy boards
Properties
- very high heat resistance
- fast curing
|
Ebalta AH 100 / D | アジア太平洋地域 |
Applications
- Bonding resin for fillers
- Bonding resin for backfillings
Properties
- unfilled
- extreme low viscosity
- high filler content possible
|
Ebalta AH 100 / GL | アジア太平洋地域 |
Applications
- Laminating resin for fabrics
- Bonding resin for fillers
Properties
- unfilled
- skin friendly
- nearly odourless
- good wet-out characteristics
|
Ebalta AH 100 / TG | アジア太平洋地域 |
Applications
- Bonding resin for silica sand auxiliary negatives
- Laminating resin for fabrics
- Bonding resin for fillers
Properties
- unfilled
- low cost
- low viscosity
|
Ebalta AH 100 / TGL | アジア太平洋地域 |
Applications
- Laminating resin for fabrics
- Bonding resin for fillers
- for large volume back fillings
Properties
- unfilled
- slow curing
|
Ebalta AH 100 / TGS | アジア太平洋地域 |
Applications
- Thin-walled laminates
- Low volume backfillings
- Bonding resin for fillers
Properties
- unfilled
- fast curing
|