Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010

Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010

Fluoroelastomer (F26) (FKM) Quality Standard: Q/321200GDH010—2010

Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010

Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010

Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010

Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010

Fluoroelastomer (F246) (FKM) Quality Standard: Q/321200GDH010-2010

This modified fluoro-elastomer based compound is the right choice for manufacturing very flexible wires and cables. Applications in harsh environments in military, aerospace, automotive and other industries, where high performance takes first place.

A translucent brown fluoropolymer compound reinforced with semi- crystalline perfluoropolymer nano-particles, specially developed to meet the demands of the semiconductor industry. Nanofluor® Y75N combines a fully fluorinated nano-filler system which significantly reduces gas permeability. The absence of metallic or carbon-based fillers produces an exceptionally pure, translucent elastomer that is less prone to chemical attack with the benefit of reduced swelling following exposure to aggressive media. Nanofluor® Y75N is a truly novel material which bridges the gap between fluorocarbons (FKM) and perfluoroelastomers (FFKM). Its high fluorine content provides unrivalled purity, excellent high temperature capability and very good chemical resistance. Nanofluor® Y75N is a cost effective upgrade from FKM and fluorosilicone in many semiconductor applications. Key Attributes - Good all round chemical and temperature resistance. - Outstanding mechanical properties. - Exceptional oxygen plasma resistance. - Exceptionally pure - does not contain any inorganic fillers or metal oxides which cause particulation problems. - Extremely low permeability and out-gassing properties making it ideal for vacuum sealing applications. - High sealing conformity reduces surface permeation. Typical Applications Designed for use in semiconductor applications, including: - NW and KF flange fittings - Dry plasma etch - Wet etch (acid based) - Dry ashing - Oxidation/diffusion - Lithography - Static seals: O-rings, body seals, cathode seals - Gaskets

Fluoroelastomer Rubber, 60 IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. ASTM designation = FKM. ISO designation = FPM. Excellent oil and heat resistance. For repeated use in equipment associated with the production of foodstuffs intended for human consumption. For use with aqueous or fatty foods.

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications. V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance. V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components. Key Attributes - With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C - Low compression set giving excellent seal performance - Good elongation properties making fitting easier even at low temperature - Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications - Valves and pumps in cold operating environments - Seal applications that are exposed to cold situations - Applications that demand high variations in temperature

V70H is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V70H has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. V70H also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1. Key Attributes - Low compression set provides long-term sealing performance. - Excellent resistance to oils - FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) - USP Class VI <88> and USP <87> compliant - 3-A Sanitary Standards Class 1 compliant - Free from Animal Derived Ingredients Typical Applications - Pharmaceutical and bio-analytical equipment - Food and dairy processing equipment - Brewing equipment

Black, Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. ASTM designation = FKM. ISO designation = FPM. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) in accordance with Code of Federal Regulations Title 21 (CFR21) Part 177.2600. WRC approved for cold water applications. WRC Reference No: 0907521 FDA grade, formulated for use as product contact surfaces in dairy equipment.

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F). V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media. Key Attributes - Excellent steam resistance up to 200°C - Superior resistance to a wide range of solvents & chemicals - Superior mechanical properties - FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) - USP Class VI compliant - 3-A Standard 18-03 Class 1 compliant - Free from Animal Derived Ingredients Typical Applications Recommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. - O-rings - Gaskets - Hygienic/sanitary couplings & pipe connectors - Ball segment valve seals (inflatable seals)

V71C is a Terpolymer FKM material developed to offer increased efficiency and service life in low temperature applications. V71C extends the operational performance of FKM seals by a full 15°C lower than is possible with well established low temperature FKM grades. It sets a new industry benchmark in low temperature performance. V71C exhibits the same chemical and mechanical properties as B-type and G-type FKM grades. Available in any sized O-ring (fully moulded up to 2m/6.5ft internal diameter) and custom designed components. Key Attributes - With a glass transition of -40°C (-40°F), V71C offers the widest operating temperature range of -51°C to +225°C - Low compression set giving excellent seal performance - Good elongation properties making fitting easier even at low temperature - Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications - Valves and pumps in cold (Arctic) operating environments - Mechanical seals - Flow meters & sensors - Seal applications that are exposed to cold situations or high temperature variations.

V72G is a fluoroelastomer (FKM) rubber, a Copolymer of vinylidene fluoride and hexafluoropropylene, coloured green for easy identification. FKM materials typically provide excellent resistance to heat, aliphatic and aromatic hydrocarbons, chlorinated solvents and petroleum fluids. Fluoroelastomers offer superior O-ring sealing force retention over most other oil-heat resistant elastomers, with the exception of perfluoroelastomers. V72G is accepted by the UK Ministry of Defence (MOD) to Defence Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Available in any sized O-ring (fully moulded up to 2.5m/8ft internal diameter) and custom designed components. Key Attributes - Excellent heat resistance and long-term sealing performance - Broad chemical resistance - Superior mechanical properties - Coloured green for easy identification - Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications - Naval ships and submarines - Chemical processing equipment - Pumps - Valves

V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat ageing properties. V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership. V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature. Available in any sized O-ring (fully moulded up to 2m/6.5ft internal diameter) and custom designed components. Key Attributes - Extremely low compression set and cumulative compression set providing extended seal life - Excellent long-term high temperature stability - Superior heat ageing properties for long-term sealing Typical Applications - Vacuum pumps & compressors (high temperature applications) - Mechanical seals - Chemical pumps and valves - Couplings and quick connectors

Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out:- M2HK710, A1-10, B37, B38, EF31, EO78, F14, Z1, where Z1 = compression set 30% max. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

V75G is a fluoroelastomer (FKM) material developed to offer good compression set performance and good all-round chemical resistance in operating temperatures up to 200°C (392°F). This material is used extensively in vacuum applications due to its low gas permeability and diesel engines where its broad chemical resistance, at medium operating temperatures, provides excellent long- term service life. Available in any sized O-ring (fully moulded up to 2m/6.5ft internal diameter) and custom designed components. V75G meets ASTM D2000 line call-out M2HK707, A1-10, B38, EF31, EO78, F15, Z1, Z2 (Z1 = colour green & Z2 = comp-set 30% max.). Key Attributes - Excellent long-term sealing performance - Broad chemical resistance - Coloured green for easy identification Typical Applications - Vacuum equipment - Mechanical seals - Marine diesel engines: Cylinder liners, Injection systems, Low temp. exhaust valve seals, Cooling channels

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments. V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives. V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations. Key Attributes - Excellent resistance to hot water and steam - Excellent resistance to oils, fuels and hydraulic fluids - High temperature performance - Superior long-term sealing performance Typical Applications - Marine diesel engines (valve seats & liner rings) - Heat exchangers - Paper/pulp processing equipment - Hot water/steam systems

Brown Fluoroelastomer Rubber, 70-80 IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out:- M2HK710, A1-10, B37, B38, EF31, EO78, F15, Z1, Z2. Z1 = comp-set 30% max. Z2 = brown. ASTM designation = FKM. ISO designation = FPM. Excellent resistance to oils, fuels and hydraulic fluids at high temperatures.

V75SR is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. Unlike other FDA-compliant fluoroelastomers, V75SR provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F). V75SR can be used for all types of applications requiring FDA, 3A and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media. Available in any sized O-ring (fully moulded up to 2m/6.5ft internal diameter) and custom designed components. Key Attributes - Excellent steam resistance up to 200°C (+392°F) - Superior resistance to a wide range of solvents & chemicals - Superior mechanical properties - FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) - 3A Sanitary Standard 18-03 Class 1 compliant - Free from Animal Derived Ingredients Typical Applications Recommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. - O-rings - Gaskets - Hygienic/sanitary couplings & pipe connectors - Ball segment valve seals (inflatable seals)

Peroxide cured, Fluoroelastomer Rubber, 70-80 IRHD. Tetrapolymer of vinylidene fluoride, perfluoromethyl vinyl ether, tetrafluoroethylene plus cure site monomer (CSM). Formulated using Viton? GLT. Viton? is a registered trademark of Dupont®. ASTM designation = FKM. ISO designation = FPM. Recommended for use in static or dynamic applications where low temperature performance is required. Chemical resistance is similar to that of standard fluoroelastomer. Low temperature performance superior to other grades of fluoroelastomer.

V75W is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V75W has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. V75W also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1. Key Attributes - Low compression set provides long-term sealing performance. - Excellent resistance to oils, fuels and hydraulic fluids. - FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) - USP Class VI <88> and USP <87> compliant - 3-A Sanitary Standards 18-03 Class 1 compliant - Free from Animal Derived Ingredients (ADI-free) Typical Applications - Pharmaceutical and bio-analytical equipment - Food processing equipment - Industrial applications (eg. paint spray and printing)

ETP polymer. This peroxide cured compound is based on a tetrapolymer of Ethylene, Tetrafluoroethylene (TFE) and Perfluoromethylvinylether (PMVE), and a cure site monomer - 70-80 °IRHD. This compound offers a higher level of fluid resistance than that of fluoroelastomers. It is not totally perfluorinated, so will not exhibit the ultra-low volume swell associated with Perlast® perfluoroelastomers. It is particularly suited to applications which have contact with strong amines, bases, steam and polar solvents. It improves on the chemical resistance of Aflas® and FKM elastomers, while retaining excellent low temperature performance.

V76F is a peroxide-cured tetrapolymer (70% fluorine) formulated for high performance sealing applications in today's aggressive industrial environments. V76F has been developed to provide outstanding resistance to solvents, fuels, hot water and steam (above 150°C/302°F). V76F also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in fuel systems, chemical processing equipment and certain critical diesel engine locations. Alternative to lead-containing (litharge-cured) steam resistant grades. Key Attributes - Excellent resistance to fuels and solvents - Excellent resistance to oils, steam/water and hydraulic fluids - High temperature performance - Superior long-term sealing performance Typical Applications - Marine diesel engines (e.g. fuel systems, cooling ports) - Biofuel processing equipment - Heat exchangers - Paper/pulp processing equipment - Hot water/steam systems

Off-white Fluoroelastomer Rubber, 70-80 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. With additional anti friction agents. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. Also complies to the requirements of USP 25, NF20, 2002, Class 6. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

Fluoroelastomer Rubber, 76-85 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out:- M2HK810, A1-10, B37, B38, EF31, EO78, F15, Z1. Where Z1 = compression set 30% max. ASTM designation = FKM. ISO designation = FPM. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

V80D is a fluoroelastomer (FKM) material developed to offer superior long-term low compression set and heat ageing properties whilst operating at high temperature. V80D has been engineered to retain its mechanical properties longer than conventional FKM grades combined with excellent chemical resistance to petroleum, silicone, air and diester-based fluids. Meets Aerospace Specifications DTD5612A & DTD5543B Grade 80. Available in any sized O-ring (fully moulded up to 2.5m/8ft internal diameter) and custom designed components. Key Attributes - Excellent long-term sealing performance - Superior heat ageing properties for extended service life - Superior chemical resistance especially in heavy fuel oil (HFO) at temperatures up to 150°C (302°F). Typical Applications - Mechanical seals - Chemical pumps and valves - Diesel engines: Injection systems, Cylinder seals, Exhaust valve seals up to 180°C (356°F) - Couplings and quick connectors

Fluoroelastomer Rubber, 75-85 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). Water and n-Hexane extraction tested in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600. Excellent oil and heat resistance. For repeated use in equipment associated with the production of foodstuffs intended for human consumption. For use with aqueous or fatty foods.

V95X is a high performance general purpose copolymer fluoroelastomer (FKM). This material provides excellent compression set performance and good chemical resistance to phosphate ester, acids, aliphatic and aromatic hydrocarbons, brines, solvents and petroleum fluids. V95X offers superior high temperature capability over HNBR elastomers and provides outstanding O-ring sealing force retention over most other oil-heat resistant elastomers with the exception of FFKM perfluoroelastomers. Key Attributes - Good resistance to Explosive Decompression - Wide chemical resistance - Excellent properties in high pressure applications - High strength and extrusion resistant Typical Applications - Low temperature and high pressure environments - Exploration and drilling equipment - Completion equipment - Subsea valves and pumps - Compressors - O-rings, special profile and custom-made seals

Fluoroelastomer Rubber, 90-98 °IRHD. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. To meet ASTM D2000 line call-out M3HK914, A1-10, B37, B38, EF31, EO78, Z1. Where Z1 = hardness 90-98. ASTM designation = FKM. ISO designation = FPM. A hard, anti-extrusion resistant rubber, specially designed for use in high pressure applications. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

Quniton® serves as a highly lubricious material compound with performance capabilities uniquely designed to improve and withstand application needs. Formulated to have a low coefficient of friction, it resists bonding or sticking to a wide range of materials diversifying interface capability. Quniton® possesses non-reactive properties that ensure consistent surface to surface contact over time retaining chemical and thermal stability.

Quniton® serves as a highly lubricious material compound with performance capabilities uniquely designed to improve and withstand application needs. Formulated to have a low coefficient of friction, it resists bonding or sticking to a wide range of materials diversifying interface capability. Quniton® possesses non-reactive properties that ensure consistent surface to surface contact over time retaining chemical and thermal stability.

Quniton® serves as a highly lubricious material compound with performance capabilities uniquely designed to improve and withstand application needs. Formulated to have a low coefficient of friction, it resists bonding or sticking to a wide range of materials diversifying interface capability. Quniton® possesses non-reactive properties that ensure consistent surface to surface contact over time retaining chemical and thermal stability.

Quniton® serves as a highly lubricious material compound with performance capabilities uniquely designed to improve and withstand application needs. Formulated to have a low coefficient of friction, it resists bonding or sticking to a wide range of materials diversifying interface capability. Quniton® possesses non-reactive properties that ensure consistent surface to surface contact over time retaining chemical and thermal stability.

Viton® A-100 fluoroelastomer is an ultralow-viscosity, "A-type" gum polymer that demonstrates improved processing and rheology in comparison with existing fluoroelastomers. Viton® A-100 is especially designed for use with Viton® Curative #50. It may be blended with other Viton® types to enhance flow and processibility. Compared with other "A-family" dipolymers, Viton® A-100 provides: - Ultralow viscosity - Improved processing -- increased mold flow -- can be blended with other Viton® types to enhance processibility and improve flow - Excellent mold release - Good compression set resistance for low-viscosity types of Viton® . Applications - Transfer and injection molding of complex shapes such as gaskets - Extrusions -- can be used to modify viscosity of other types of Viton® - Solution coating -- fabric -- tanks or chemical containers

Viton® A-200 fluoroelastomer is an "A-family" gum polymer that demonstrates improved processing when compared with existing fluoroelastomers.Viton® A-200 is designed for use with the clean molding bisphenol curative, Viton® Curative No. 50. Compared to other "A-family" dipolymers, Viton® A-200 provides: - Lower viscosity - Improved mold flow - Excellent extrusion characteristics - Better mold release - Less mold fouling - Improved compression set resistance Applications - Transfer and injection molding -- O-rings -- Valve stem seals and shaft seals -- Parts with complicated shapes - Extrusions -- Fuel hose and tubing - Solution coating -- Fabric -- Tanks or chemical containers

Viton® A-331C is an incorporated cure "A-family" dipolymer designed for the injection and transfer of molding parts requiring improved demolding "hot tear" resistance. The moderate viscosity level of Viton® A-331C also allows for satisfactory compression molding of parts. Features - Intermediate viscosity level (when compared with related "O-Ring" polymers Viton® A-202C and Viton® A-402C) - Fully precompounded -- reduced curative level -- incorporated process aid - Improved processing -- increased mold flow -- better mold release with less mold fouling -- improved demolding "hot tear" - Good compression set resistance Applications - Injection, transfer and compression molding of: -- O-rings, seals, and gaskets -- Other profiles requiring improved demolding "hot tear" -- Extruded O-ring cord, hose, and other profiles