SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7358A is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. SUPEER™ 7358A is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SUPEER™ Metallocene Linear Low Density Polyethylene (mLLDPE) 7358TA is a metallocene ethylene-hexene copolymer. It has a good processability and performs well in a wide range of general purpose and high performance cast film applications. Films produced with this grade offer good impact strength, puncture resistance, sealing and optical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications.

LLC4-010 is a Butene-comonomer certified prime resin designed for Blown films for general purpose packaging. LLC4-010 features a wide heat sealing temperature range easy processability and good film strength as well as wide heat sealing temperature range. LLC4-010 complies with FDA regulation 21CFR 177.1520(c) 3.1a, and with most international regulations concerning the use of Polyethylene in contact with food articles. LLC4-010 contains no slip and no antiblock. Also Available in: B = Barefoot A= 0 Slip / High Anti Block (0/6500) F = Full Adds (1500/6500)

LLC4-020 is a Butene-comonomer certified prime resin designed for Cast or Blown film for Stretch-Cling and General Purpose applications. LLC4-020 features easy processability, good film strength and a broad heat sealing range. LLC4-020 complies with FDA regulation 21CFR 177.1520(c) 3.1a. LLC4-020 contains no slip and no antiblock. Also Available in: B = Barefoot A= 0 Slip / High Anti Block (0/6500) F = Full Adds (1500/6500)

LLC4-200 is a Butene-ethylene copolymer certified prime resin designed for INJECTION MOLDING applications that require a good balance of good mechanical properties and low warpage and low temperature resistance. LLC4-200 features easy processability over a wide range of molding conditions, good flexibility, and high surface appearance of molded articles. LLC4-200 is ideal for when excellent toughness, high impact strength and high gloss are required. Recommended processing temperature is 180 to 220°C., with mold at 20 to 40°C. LLC4-200 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLC4-200G is a Butene-ethylene certified prime copolymer, designed for COMPOUNDING applications requiring good melt viscosity and good melt flow to assure thorough mixing and dispersion of components. LLC4-200G features wide process window, easy processability, medium melt flow and improved dispersion capability. LLC4-200G is supplied in granular form. Suggested processing temperature is 180° to 220°C. LLC4-200G complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

LLC4-500 is a certified prime grade, containing Butene-ethylene copolymer designed for High-Flow INJECTION MOLDING of thin-walled high quality applications. LLC4-500 features superior processability over a wide range of molding conditions, fast cycle times, very good rigidity, high gloss surface, low temperature toughness, and warpage free moldings. LLC4-500 applications include housewares, margarine tubs, small to medium containers, trash cans, toys, and multicavity lids, closures and caps, where excellent toughness, good impact strength and high gloss are required. Recommended processing temperature is 170 to 210°C., with mold at 20 to 40°C. LLC4-500 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLC6-008 is a Hexene copolymer certified resin designed for production of Blown films requiring a combination of good film stiffness and toughness. LLC6-008 contains no slip, medium antiblock and process aid. LLC6-008 complies with FDA regulation 21CFR 177.1520(c)3.2a and with most international regulations concerning the use of Polyethylene in contact with food articles. LLC6-008 is available in high antiblock, high slip and process aid.Film Specimen: 1.0 mils (25 µm) film; blow-up-ratio 2.5:1; Melt Temperature: 440°F AVAILABLE FORMULATIONS B = Barefoot A = 0 Slip / High Anti Block F = Full Adds

LLC6-010 is a certified prime grade resin designed for production of blown films used in general purpose packaging. LLC6-010 features a combination of easy process ability, good film strength, broad heat sealing temperature range and includes full additives. Applications include shipping sacks, ice bags, stretch films & liners. AVAILABLE ADDITIVES B = Barefoot A = 0 Slip/ High Antiblock F = Full Additives

LLC6-020 is an Ethylene-Hexene copolymer certified prime resin for CAST Flat-Die extrusion of film applications requiring high strength, toughness, excellent clarity, low stiffness, and good tensile properties. LLC6-020 contains no slip and no antiblock. LLC6-020 complies with FDA regulation 21CFR 177.1520(c) 3.1a, and with most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 Slip/ High Antiblock F = Full Additives

LLC6-200 is a certified prime resin designed for injection molding applications requiring low warpage, low temperature resistance and easy processability over a wide range of molding conditions. Recommended processing temperature is 180 to 220°C., with mold at 20 to 40°C.

LLC6-500 is a copolymer certified prime resin designed for High-Flow Injection Molding of thin-walled, high quality applications. LLC6-500 features easy processability over a wide range of molding conditions, high gloss surface, good rigidity, fast cycle times, low temperature toughness and warpage free moldings. Suggested processing temperature is 170 to 210°C, with the mold at 20 to 40°C. LLC6-500 complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles.

LLC6-500G is a granular certified prime copolymer designed for easing blending with pigments, slip and antiblock additives and other materials. LLC6-500G is an excellent base resin for masterbatch products. LLC6-500G complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles.

SureSpec LLC8-010 is a certified prime grade Ethylene-Octene Copolymer certified prime resin developed for production of High Performance Blown films of outstanding mechanical properties. LLC8-010 features easy processability and films exhibit very good Elmendorf Tear and include high toughness, impact strength and puncure resistance. Maximum recommended film drawdown is 0.4 mil. LLC8-010 contains no slip and no antiblock. LLC8-010 complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 Slip/ High Antiblock F = Full Additives

LLSC6-007 is a Super Hexene Copolymer certified prime resin developed for blown film with outstanding Impact Strength and Toughness. LLSC6-007 features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLSC6-007 complies with FDA regulation 21CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. LLSC6-007 also complies with most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 slip/ High Antiblock F = Full Additives

LLSC6-010 is an Ethylene-Hexene Copolymer certified prime g dorf tear strength. LLSC6-010 contains no slip and no antiblock. Maximum recommended film drawdown is 0.3 mil. LLSC6-010 complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 Slip/ High Antiblock F = Full Additives

Octene Copolymer LLDPE Film Resin

Octene Copolymer LLDPE Film Resin

Octene Copolymer LLDPE Film Resin

A chemically cross linkable LD-LLDPE compound for the production of flexible insulation with an improved surface quality TABOCAB SXI 003 is a cross-linkable insulation compound made using SIOPLAS technology; made by aSilane grafted ethylene copolymer known as the graft and a Masterbatch containing catalyst, antioxidant and copper deactivator system. This product is dedicated for insulation. The properties of this compound comply with the requirements of IEC 60502 XLPE; IEC 60092/351; VDE 0276 2XI1; HD 604 2XI1.

TABOREN-EC 49 C70 is a compound based on LLDPE, filled with 70 % CaCO3 and stabilized with a high antioxidant additive package. The grade is suitable for production of breathable films used in the hygiene industry. It is available in natural colour.

Taisox 3210/3214 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for blown film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3210/3214 provides various good properties, such as excellent film strength, good processability, good heat-seal and optical properties. Taisox 3210/3214 can be used for heavy duty sacks,agricultural films,liners produce bags ,stretch film.

Taisox 3210/3214 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for blown film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3210/3214 provides various good properties, such as excellent film strength, good processability, good heat-seal and optical properties. Taisox 3210/3214 can be used for heavy duty sacks,agricultural films,liners produce bags ,stretch film.

Taisox 3220/3224/3224D is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for blown film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3220/3224/3224D provides various good properties, such as excellent film strength, good processability, good heat-seal and optical properties. Taisox 3220/3224/3224D can be used for heavy duty sacks,agricultural films,liners produce bags ,stretch film.

Taisox 3220/3224/3224D is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for blown film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3220/3224/3224D provides various good properties, such as excellent film strength, good processability, good heat-seal and optical properties. Taisox 3220/3224/3224D can be used for heavy duty sacks,agricultural films,liners produce bags ,stretch film.

Taisox 3220/3224/3224D is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for blown film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3220/3224/3224D provides various good properties, such as excellent film strength, good processability, good heat-seal and optical properties. Taisox 3220/3224/3224D can be used for heavy duty sacks,agricultural films,liners produce bags ,stretch film.

Taisox 3225 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for cast film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3225 provides various good properties, such as excellent film strength, good processability, good heat-seal, superior optical properties. Taisox 3225 can be used for cast stretch film, overwarp film.

Taisox 3225 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for cast film applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3225 provides various good properties, such as excellent film strength, good processability, good heat-seal, superior optical properties. Taisox 3225 can be used for cast stretch film, overwarp film.

TAISOX 3440/3450/3460 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for extrusion molding applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3440/3450/3460 provides various good properties,such as excellent strength, good processability. Taisox 3440/3450/3460 can be used for PE sheeting.

TAISOX 3440/3450/3460 is an ethylene/butene copolymer based Linear Low Density Polyethylene which is designed for extrusion molding applications. The Taisox LLDPE is produced by advanced technology from BP using gas phase process. Taisox 3440/3450/3460 provides various good properties,such as excellent strength, good processability. Taisox 3440/3450/3460 can be used for PE sheeting.

3470/3490 Linear Low Density Polyethylene plastic resin are the product of advanced technology INNOVENE from BP.Ltd.UK. This gas phase process under careful process control and additive selection make TAISOX LLDPE outstanding for various good properties. Such as excellent strength, good processability. 3470/3490 can be used for Housewares, Thin walled food containers ,Lids, masterbatch.

3470/3490 Linear Low Density Polyethylene plastic resin are the product of advanced technology INNOVENE from BP.Ltd.UK. This gas phase process under careful process control and additive selection make TAISOX LLDPE outstanding for various good properties. Such as excellent strength, good processability. 3470/3490 can be used for Housewares, Thin walled food containers ,Lids, masterbatch.

3840U is linear low density polyethylene resin made by gas phase process. 3840U use 1-butene as comonomer and UV stabilizer is added. 3840U is suitable for rotational molding of large crate containers, tank, barricade etc.. 3840U has good balance of stiffness, impact strength, ESCR, and processability.

Biobased linear low density polyethylene, butene copolymer, containing mineral fillers. The biobased carbon content (BCC) is > 85 % (calculated). Suitable for profile extrusion of tubes.

Titanvene™ BPD3220 is a linear low density polyethylene designed for extrusion process especially in wire and cable insulation applications. Titanvene™ BPD3220 characterized by low gel content, easy extrusion without slip and anti block additives content. Applications Titanvene™ BPD3220 is a wire and cable polyethylene grade applications for low voltage wire insulation Recommended Processing Conditions Titanvene™ BPD3220 can be easily processed on normal machines at temperatures in the range of 180°C to 210°C. Food Contact Compliance Titanvene™ BPD3220 can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.

Titanvene™ LL0209AA is a linear low density polyethylene suitable for a wide variety of film applications with low gel content, good transparency, and excellent mechanical properties. Titanvene™ LL0209AA has no slip and antiblock additives (bare foot). Applications Titanvene™ LL0220AA is typically used for : - Sack film - Food packaging - Industrial packaging Recommended Processing Conditions Titanvene™ LL0209AA can be easily processed on normal polyethylene blow film machines at temperatures in the range of 170°C to 190°C. Food Contact Compliance Titanvene™ LL0209AA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.

Titanvene™ LL0209SC is a linear low density polyethylene for high clarity film application. Titanvene™ LL0209SC is characterized by excellent transparency, low gel content, good process ability, and good mechanical properties with low blocking force and high slip. Applications - Industrial packaging - Shopping bags - Food packaging - Rice Bag - Transparent Film - Garment Sack Recommended Processing Conditions Titanvene™ LL0209SC can be easily processed on normal polyethylene blow film machines at temperatures in the range of 170°C to 200°C. Food Contact Compliance Titanvene™ LL0209SC can be used in food contact applications. Please contact your nearest PT. Lotte Chemical TITAN Nusantara representative for more detail of food contact compliance statements for the specific grade.

Titanvene™ LL0209SR is a linear low density polyethylene designed for wide range of film. Titanvene™ LL0209SR is characterised by low gel content, good transparency, and excellent mechanical properties with low blocking force and high slip. Applications Titanvene™ LL0209SR is typically used in : - Industrial packaging - Shopping bags - Food packaging Recommended Processing Conditions Titanvene™ LL0209SR can be easily processed on normal polyethylene blow film machines at temperatures in the range of 150°C to 190°C. Food Contact Compliance Titanvene™ LL0209SR can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.

Titanvene™ LL0218AA is a linear low density polyethylene with narrow molecular weight distribution which is designed for variety injection molding applications. Titanvene™ LL0218AA has high processing characteristic, offers excellent impact strength and stress crack resistance. Applications Titanvene™ LL0218AA is typically used for : - Lids and closures - Container and trash bins - Housewares - Coating and stretch film - Toys - Master batch carrier Recommended Processing Conditions Titanvene™ LL0218AA can be easily processed on normal polyethylene injection or compression machines at temperatures in the range of 175°C to 230°C. Food Contact Compliance Titanvene™ LL0218AA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.

Titanvene™ LL0220AA is a linear low density polyethylene suitable for a wide variety of film applications with low gel content, good transparency, and excellent mechanical properties. Titanvene™ LL0220AA has no slip and antiblock additives (bare foot). Applications Titanvene™ LL0220AA is typically used for : - Casting film - Blended film. - Inner layer rotomoulding - Cable insulation. Recommended Processing Conditions Titanvene™ LL0220AA can be easily processed on normal polyethylene blow film machines at temperatures in the range of 170°C to 190°C. Food Contact Compliance Titanvene™ LL0220AA can be used in food contact applications. Please contact your nearest PT. TITAN Petrokimia Nusantara representative for more detail of food contact compliance statements for the specific grade.