Polyethylene (PE): LDPE
製品 | 可用性 | 製品の説明 |
---|---|---|
Osterlene® LD600 (-B, -SA) | 北アメリカ |
- LD600 is a low density polytheylene resin. Its a garment film resin with good toughness. It is capable of being drawn-down to thin gauges.
- Specific recommendations for processing LD600 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your sales representative.
|
Osterlene® LD6521 | 北アメリカ |
- LD6521 is a general purpose LDPE grade resin. It has good toughness and stiffness and is easy to process.
- Applications for LD6521 include domestic housewares, food containers, rigid medium sized moldings, film applications, non-abrasive packaging applications.
|
Osterlene® LD7020 | 北アメリカ |
- LD7020 is a broad molecular weight distribution homopolymer designed to offer good impact strength and crack resistance, and has excellent flexibility. This resin has good processability over a wide range of molding conditions.
- Typical applications for LD7020 include Caps & Closures, containers, and household goods
- LD7020 is well suited for injection molding and extrusion coating.
- Specific recommendations can be made only when the end use applications, properties and processing equipment are known. Consult your Osterman sales representative.
- Contact your Osterman Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB)
|
Osterlene® LD750-EC | 北アメリカ |
- LD750-EC is a broad molecular weight distribution homopolymer designed to offer good impact strength and crack resistance and has excellent flexibility. It has good processability over a wide range of molding conditions.
- LD750-EC may be used in both extrusion coating and injection molding applications. LD750-EC is intended for use in flexible packaging and paperboard coating applications and provides a good balance of neck in and drawdown performance. When used in injection molding applications LD750-EC provides a good balance of softness and toughness for applications including housewares and containers.
- Specific recommendations for processing LD750-EC can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your Osterman sales representative.
|
Osterlene® LD900 | アジア太平洋地域 |
- LD900 is designed for injection molding, bottles and master batches.
|
Osterlene® LDC1821 (-A, -SA) | 北アメリカ |
- LDC1821 is a series of homopolymer resins that combine premium clarity with strength and stiffness. It exhibits good impact strength on both flat and creased film. It is recommended for textile packaging, light produce, bread bags and other thin packaging films enhanced by clarity and sparkle.
- Specific recommendations for processing can only be made when the processing conditions, equipment and end use are known. Consult your Osterman sales Representative.
|
PAXOTHENE® NA112-27 | アジア太平洋地域 |
PAXOTHENE®NA112-27 is a low density polyethylene resin (LDPE) for use in blown film extrusion and injection molding.
This resin is supplied in pellet form and contains a slip agent to improve machinability.
Characteristics
- Good toughness
- High gloss
- Low haze characteristics of blown film
Applications
- Shopping bag, frozen food bag and reclosable bag
- Plastic potion bottle
|
PAXOTHENE® NA207-66 | アジア太平洋地域 |
PAXOTHENE®NA207-66 is a low density polyethylene resin (LDPE) for use in blown film extrusion and injection molding.
This resin is supplied in pellet form and contains an antiblocking agent and a slip agent to improve openability of film and machinability.
Characteristics
- High flowability
- Good surface anti-blocking
- Excellent openability
- Outstanding gloss
Applications
- Bags
- Plastic tree trunk
|
PAXOTHENE® NA208 | アジア太平洋地域 |
PAXOTHENE®NA208 is a low density polyethylene resin (LDPE) for use in power coating and injection molding.
Characteristics
- High flowability
- Outstanding gloss
- Good toughness
- Good stiffness
Applications
- Housewares
- PE plastic lid for milk powder can
- Toys
- Christmas mini lights
- Plastic tree trunk
|
PAXOTHENE® NA248 | アジア太平洋地域 |
PAXOTHENE®NA248 is a low density polyethylene resin (LDPE) for use in injection molding.
Characteristics
- High flowability
- Flexibility
Applications
- Artificial flowers or leaves
- PE plastic lid for milk powder can
|
Pemex PX 20020 P | ラテンアメリカ | |
Pemex PX 20020 X | ラテンアメリカ | |
Pemex PX 22004 C | ラテンアメリカ | |
PermaStat® 700 A | アジア太平洋地域 |
ESD Protection - Permanently Anti-static
|
PETILEN F2-12 | アジア太平洋地域 |
PETILEN F2-12 is a low density polyethylene resin produced by high pressure autoclave process. The product is developed for general purpose blown film applications used in packaging industry.
Applications
Film extrusion: food packaging, multi-layer film lamination, air bubble film and toy’s net bags
Sheet extrusion: foam sheet
Additives
PETILEN F2-12 contains medium level of antiblock and slip agent. It is heat stabilized.
Compliance to Regulations
The formulation and production of PETILEN F2-12 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN F2-21T | アジア太平洋地域 |
PETILEN F2-21T is a low density polyethylene resin produced by high pressure tubular process. The product is developed for general purpose blown film applications used in packaging industry.
Applications
Film extrusion: film production for general purpose and display packaging
Additives
PETILEN F2-21T contains medium level of antiblock and slip agent. It is heat stabilized.
Compliance to Regulations
The formulation and production of PETILEN F2-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN F2-26TO | アジア太平洋地域 |
PETILEN F2-26TO is a low density polyethylene resin produced by high pressure tubular process. The product is developed for general purpose blown film applications used in packaging industry.
Applications
Film extrusion: high speed automatic packaging, multi-layer film lamination
Sheet extrusion: foam sheet
Additives
PETILEN F2-26TO contains a medium level of anti-blocking and slip agents (Oleamide).
Compliance to Regulations
The formulation and production of PETILEN F2-26TO conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN F5-21T | アジア太平洋地域 |
PETILEN F5-21T is a low density polyethylene resin produced by high pressure tubular process. The product is developed especially for very thin blown film applications.
Applications
Film extrusion: textile packaging, mulch film, lamination, thin film applications
Additives
PETILEN F5-21T contains medium level of anti-blocking and slip agent.
Compliance to Regulations
The formulation and production of PETILEN F5-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN G03-21T | アジア太平洋地域 |
PETILEN G03-21T is a low density polyethylene resin produced by high pressure tubular process. Having high average molecular weight, the product is developed for general purpose applications.
PETILEN G03-21T contains no additives.
Applications
Blown film extrusion: shrink film, agriculture, heavy duty bags
Blow molding: containers and bottles
Pipe extrusion: various pipes
Compliance to Regulations
The formulation and production of PETILEN G03-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN G03-5 | アジア太平洋地域 |
PETILEN G03-5 is a low density polyethylene resin produced by high pressure autoclave process. The product has broad molecular weight distribution and low melt flow rate. Developed for general purpose applications, PETILEN G03-5 contains no additives.
Applications
Blown film extrusion: shrink films, construction and agricultural films, heavy duty bags and sacks
Blow molding: containers and bottles
Pipe extrusion: drip irrigation pipes
Compliance to Regulations
The formulation and production of PETILEN G03-5 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN G08-21T | アジア太平洋地域 |
PETILEN G08-21T is a low density polyethylene resin produced by high pressure tubular process. Having high average molecular weight, the product is developed for general purpose applications.
PETILEN G08-21T contains no additives.
Applications
Blown film extrusion: thin shrink film, heavy duty bags
Blow molding: bottles
Compliance to Regulations
The formulation and production of PETILEN G08-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN H2-21T | アジア太平洋地域 |
PETILEN H2-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications.
PETILEN H2-21T contains no additives.
Applications
General purpose coating: wire coating, cable sheath
Sheet extrusion: foam sheets
Pipe extrusion: foam pipes
Film extrusion: lamination, citrus fruit bags
Compliance to Regulations
The formulation and production of PETILEN H2-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN H2-8 | アジア太平洋地域 |
PETILEN H2-8 is a low density polyethylene resin produced by high pressure autoclave process. The product has medium molecular weight distribution and medium melt flow rate. Developed for general purpose coating and blown film applications, PETILEN H2-8 contains no additives.
Applications
Film extrusion: air bubble films, color and film masterbatch production
General purpose coating: paper lamination, aluminum panel coating
Compliance to Regulations
The formulation and production of PETILEN H2-8 conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN H5-21T | アジア太平洋地域 |
PETILEN H5-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications.
PETILEN H5-21T contains no additives.
Applications
Extrusion coating: paper coating, cardboard coating, aluminum foil coating
Masterbatch and compound production: colour and filler masterbatches, compound production
Injection molding: kitchen goods, toys, caps and closures
Compliance to Regulations
The formulation and production of PETILEN H5-21T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN H7-20T | アジア太平洋地域 |
PETILEN H7-20T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications.
PETILEN H7-20T contains no additives.
Applications
Extrusion coating: paper coating, cardboard coating, aluminum foil coating
Masterbatch and compound production: colour and filler masterbatches, compound production
Injection molding: kitchen goods, toys, caps and closures
Compliance to Regulations
The formulation and production of PETILEN H7-20T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN I10-19T | アジア太平洋地域 |
PETILEN I10-19T is a high flow low density polyethylene resin, produced by high pressure tubular process. It is developed for injection molding and compounding applications. PETILEN I10-19T contains no additives.
Applications
Injection molding: kitchen goods, toys, caps and closures
Masterbatch production: color and filler masterbatches, compound production
Compliance to Regulations
The formulation and production of PETILEN I10-19T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETILEN I22-19T | アジア太平洋地域 |
PETILEN I22-19T is a high flow low density polyethylene resin, produced by high pressure tubular process. It is developed for injection molding and compounding applications. PETILEN I22-19T contains no additives.
Applications
Injection molding: kitchen goods, toys, caps and closures
Masterbatch production: color and filler masterbatches, compound production
Compliance to Regulations
The formulation and production of PETILEN I22-19T conforms to the compositional requirements of the Commission Regulation (EU) No. 10/2011.
|
PETLIN LD C150Y | アジア太平洋地域 |
PETLIN LD C150Y is a low density polyethylene resin for general purpose and film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for blown film process.
|
PETLIN LD C225Y | アジア太平洋地域 |
PETLIN LD C225Y is a low density polyethylene resin for high clarity general purpose film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for blown film process.
|
PETLIN LD M022X | アジア太平洋地域 |
PETLIN LD M022X is a low density polyethylene resin designed primarily for injection molding and masterbatch applications. It is produced by the state-of-the-art Clean Tubular Reactor production technology.
|
PETLIN LD M050X | アジア太平洋地域 |
PETLIN LD M050X is a low density polyethylene resin designed primarily for injection molding applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free).
|
PETLIN LD N103X | アジア太平洋地域 |
PETLIN LD N103X is a low density polyethylene resin for heavy duty film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free) additives. It is intended primarily for blown film process.
|
PETLIN LD N109X | アジア太平洋地域 |
PETLIN LD N109X is a low density polyethylene resin for emdium duty film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free) additives. It is intended primarily for blown film process.
|
PETLIN LD N119X | アジア太平洋地域 |
PETLIN LD N119X is a low density polyethylene resin designed for a wide range of applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free) additives.
|
PETLIN LD N125Y | アジア太平洋地域 |
PETLIN LD N125Y is a low density polyethylene resin for general purpose film applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free), slip and antiblock additives. It is intended primarily for blown film process.
|
Petro Rabigh PE G201 | アフリカ&中東 |
G201 is a high-pressure Low Density Polyethylene. This resin is mainly recommendable for Injection molding applications.
Applications:
Injection application (Inside plug, Container, etc.) and small bottles.
|
Petro Rabigh PE L705 | アフリカ&中東 |
L705 is a Low Density Polyethylene resin designed for mainly extrusion coating application. L705 contains no additives such as slipping agents or anti-blocking agents.
Applications:
Extrusion coating application
|
Petrothene® GA635962 | 北アメリカ |
Petrothene GA635962 is a high flow hexene LLDPE resin selected by customers for the rotational molding of large hollow objects, including toys, playground equipment, drums and agricultural and chemical storage containers. GA635962 exhibits high ESCR, low temperature impact strength and warp resistance. GA635962 is UV-stabilized and available in a 35-mesh powder as Microthene MP635962.
|
Petrothene® L2560S | アジア太平洋地域 |
PETROTHENE L 2560S is a fractional melt index LDPE resin that exhibits a good balance of strength, clarity and heat seal characteristics. L 2560S is formulated without slip but with a medium antiblock level. Typical applications include produce bags, shrink wrap, frozen food containers, bundling and diaper films.
|
Petrothene® L3035 | 北アメリカ |
Petrothene L3035 is a fractional melt index LDPE resin that exhibits an excellent balance of optics, modulus, puncture, tear and shrink characteristics. Typical applications include collation shrink film, shrink bundling, pallet shrink film, frozen food packaging, overwraps and heavy duty films where clarity and stiffness are important.
|