Polyethylene (PE): LDPE
製品 | 可用性 | 製品の説明 |
---|---|---|
Alkathene® LD1217 | アジア太平洋地域 |
Alkathene LD1217 is an extrusion coating grade exhibiting very low odour and taint and excellent heat seal characteristics. It also has good drawdown and very low neck-in allowing low coating weights whilst maintaining very good adhesion to a variety of substances.
Alkathene LD1217 is ideally suited for liquid packaging and other sensitive food packaging laminates.
|
Alkathene® LD6622 | アジア太平洋地域 |
Alkathene LD6622 is a high flow injection moulding grade of low density polyethylene.
Alkathene LD6622 is intended for use in the production of thin-walled injection mouldings. LD6622 is not recommended for high stress crack resistance applications. Suitability for use in any application should be determined by appropriate performance testing.
|
Alkathene® LDD201 | アジア太平洋地域 |
Alkathene LDD201 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) general purpose film applications. Alkathene LDD201 is formulated with a process stabilisation additive package but contains no antiblock or slip additives.
Film Extrusion: Alkathene LDD201 is intended for heavy duty bags, shrink film and other medium to heavy gauge films.
|
Alkathene® LDD203 | アジア太平洋地域 |
Alkathene LDD203 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) general purpose film applications. Alkathene LDD203 is formulated with a process stabilisation and antiblock additive package but contains no slip additives.
Film Extrusion: Alkathene LDD203 is intended for heavy duty bags, shrink film and other medium to heavy gauge films that require antiblock.
|
Alkathene® LDD204 | アジア太平洋地域 |
Alkathene LDD204 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) applications in which a medium slip film is required. Alkathene LDD204 is formulated with a process stabilisation and antiblock additive package and contains additives to confer a medium level of slip.
Film Extrusion: Alkathene LDD204 is intended for heavy duty bags, shrink film and other medium to heavy duty films that require antiblock and a medium level of slip.
|
Alkathene® LDD205 | アジア太平洋地域 |
Alkathene LDD205 is a low density polyethylene designed for a variety of medium to heavy gauge (50-150µm) applications in which a high slip film is required. Alkathene LDD205 is formulated with a process stabilisation and antiblock additive package and contains additives designed to confer a high level of slip.
Film Extrusion: Alkathene LDD205 is intended for heavy duty bags, shrink film and other medium to heavy gauge films that require antiblock and a high level of slip.
|
Alkathene® LDF433 | アジア太平洋地域 |
Alkathene LDF433 is a low density polyethylene designed for a variety of medium to heavy gauge (70 - 200µm) film applications where increased stiffness is required. Alkathene LDF433 is formulated with a process stabilisation and antiblock package but contains no slip additives.
Film Extrusion: Alkathene LDF433 is intended for use in medium to heavy duty sacks, shrink film, pallet wrap and other industrial applications requiring increased stiffness.
|
Alkathene® LDH210 | アジア太平洋地域 |
Alkathene LDH210 is a low density polyethylene designed for a variety of medium gauge (40-80µm) general purpose film applications. Alkathene LDH210 is formulated with a process stabilisation additive package but contains no antiblock or slip additives.
Film Extrusion: Alkathene LDH210 is intended for use in bundle shrink films as well as a variety of other medium gauge applications including produce bags and carry bags. Alkathene LDH210 is also used as a minor component in many LLDPE films.
|
Alkathene® LDH215 | アジア太平洋地域 |
Alkathene LDH215 is a low density polyethylene designed for a variety of medium gauge (40-80µm) general purpose applications in which a high slip film is required. Alkathene LDH215 is formulated with a process stabilisation and antiblock additive package and contains additives designed to confer a high level of slip.
Film Extrusion: Alkathene LDH215 is intended for use in medium gauge general purpose applications such as high slip carry bags and produce bags. Alkathene LDH215 is also used as a minor component in many high slip LLDPE films.
|
Alkathene® LDJ225 | アジア太平洋地域 |
Alkathene LDJ225 is a low density polyethylene designed for use in the production of low gauge (20 - 50µm), high quality film. Alkathene LDJ225 is formulated with a process stabilisation and antiblock additive package and contains other additives designed to confer very high levels of slip.
Film Extrusion: Alkathene LDJ225 is intended primarily for use in bread bag film and other low gauge applications requiring very high slip. It is typically blended with LLDPE for applications such as lamination and overwrap films.
|
Alkathene® LDJ226 | アジア太平洋地域 |
Alkathene LDJ226 is a low density polyethylene designed for a variety of low gauge (20-50µm) general purpose applications where antistatic or a low to medium slip film is required. Alkathene LDJ226 is formulated with a process stabilisation and antiblock package and contains an antistatic additive.
Film Extrusion: Alkathene LDJ226 is intended for use in a wide range of shrink and other low gauge film applications including carry bags and overwrap films that require antiblock and a low to medium level of slip.
|
Alkathene® LDN248 | アジア太平洋地域 |
Alkathene LDN248 is a medium flow injection moulding grade of low density polyethylene.
Alkathene LDN248 is intended for use in the production of injection moulded caps and closures. LDN248 is not recommended for high stress crack resistance applications. Suitability for use in any application should be determined by appropriate performance testing.
|
Alkathene® WNC199 | アジア太平洋地域 |
Alkathene WNC199 is an extrusion coating grade exhibiting very low odour and taint and excellent heat seal characteristics. It also has good drawdown allowing low coating weights whilst maintaining very good adhesion to a variety of substances.
Alkathene WNC199 is ideally suited for liquid packaging and other sensitive food packaging laminates.
|
Alkathene® WRM124 | アジア太平洋地域 |
Alkathene WRM124 is a high flow low density polyethylene which offers excellent gloss and flow/toughness ratio coupled with a low tendency to warp.
Alkathene WRM124 is designed specifically for caps, housewares and toys. WRM124 is not recommended for high stress crack resistance applications. Suitability for use in any application should be determined by appropriate performance testing.
|
Alkathene® XDS34 | アジア太平洋地域 |
Alkathene XDS34 is a low density polyethylene designed for a variety of heavy gauge (70 - 200µm) film applications. Alkathene XDS34 does not contain any additives.
Film Extrusion: Alkathene XDS34 is intended for applications such as sacks, palletwrap, shrink film and a variety of industrial films requiring heavy gauge film.
|
Alkathene® XJF143 | アジア太平洋地域 |
Alkathene XJF143 is a low density polyethylene designed for a variety of low gauge (20 - 50µm) general purpose film applications. Alkathene XJF143 does not contain any additives.
Film Extrusion: Alkathene XJF143 is intended for use in a variety of low gauge general purpose film applications, in blown film or cast film processes. Alkathene XJF143 may also be used for other applications such as extruded foam and masterbatch.
|
Alkathene® XLC177 | アジア太平洋地域 |
Alkathene XLC177 is an extrusion coating grade exhibiting very good drawdown. The higher density and low MFI of this grade provide low moisture vapour transmission rates and excellent hot tack.
Alkathene XLC177 has been designed specifically for milkboard coating but is also used for fabric coating and production of cardboard stock.
|
Alkathene® XLF197 | アジア太平洋地域 |
Alkathene XLF197 is a low density polyethylene designed for the production of thin gauge (less than 20µm) high clarity films. Alkathene XLF197 does not contain any additives.
Film Extrusion: Alkathene XLF197 is intended primarily for the manufacture of thin food wrap and dry-cleaning films. It may also be used for other extrusion processes and masterbatch.
|
ALPERFORM PE DET FC 0243-17 | アジア太平洋地域 |
Base Polymer
Polyethylene Low Density
Filler/Additive System
detectable taggant
For Use In
Polyethylene, Polyethylene Low Density, Polyethylene Linear Low Density, Polyethylene High Density, Polypropylene, Polypropylene Homopolymer, Polypropylene Heterophasic Copolymer
Special Features
metal detection, detectable
Market Segment
food processing industry
Application Area
injection moulded parts, extruded parts, blow moulded parts
Typical Applications
film, transportation crates, scraper, fixtures / fittings
Dosage
extrusion >15 %
injection moulding >15 %
dependant on application and operational area
|
ALPERFORM PE SL FC 0205-14 EA | アジア太平洋地域 |
Base Polymer
Polyethylene Low Density
Filler/Additive System
2 % lubricant
For Use In
Polyethylene Low Density, Polyethylene Linear Low Density, Polyethylene High Density, Ethylene Acrylic Acid Copolymer, Polypropylene, Polypropylene Copolymer
Special Features
slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, dust-free
Market Segment
food processing industry, household goods, packaging
Application Area
injection moulded parts, extruded parts, blow moulded parts, compounding
Dosage
5 % extrusion
5 % injection moulding
dependant on application and operational area
|
ALPERFORM PE SL FC 0207-14 OA | アジア太平洋地域 |
Base Polymer
Polyethylene Low Density
Filler/Additive System
2 % lubricant
For Use In
Polyethylene Low Density, Polyethylene Linear Low Density, Polyethylene High Density, Ethylene Acrylic Acid Copolymer, Polypropylene, Polypropylene Copolymer
Special Features
slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, dust-free
Market Segment
food processing industry, household goods, packaging
Application Area
injection moulded parts, extruded parts, blow moulded parts, compounding
Dosage
5 % injection moulding
5 % extrusion
dependant on application and operational area
|
ASI POLYETHYLENE CP 795-31 Black | アジア太平洋地域 |
CP 795-31 black is an extruded, blow molding, and injection molding grade of low density polyethylene having good processability and heat sealability. The property data documented in this TDS is based off of a Natural color version of this material.
|
AT® 190 | アジア太平洋地域 |
This resin is commonly used for hot melt adhesive and coating applications. This product is not intended for use in medical or dental implants.
|
AT® 191A | アジア太平洋地域 |
This resin is commonly used for hot melt adhesive and coating applications. This product is not intended for use in medical or dental implants.
|
AT® 192 | アジア太平洋地域 |
This resin is commonly used for carpet backing extrusion coating applications. This product is not intended for use in medical or dental implants.
|
AT® 193 | アジア太平洋地域 |
This resin is commonly used for hot melt adhesive and coating applications. This product is not intended for use in medical or dental implants.
|
AT® 220 | アジア太平洋地域 |
This resin is commonly used for semi-rigid pipe, tubing, molding and foam applications. This product is not intended for use in medical or dental implants.
|
AT® 280 | アジア太平洋地域 |
This resin is commonly used for hot melt coating and adhesive applications, compounds and masterbatches, and extrusion and molding applications. This product is not intended for use in medical or dental implants.
|
AT® 412 | アジア太平洋地域 |
This resin is commonly used for extrusion coating and lamination applications. This resin has excellent adhesion and low neck-in at high linespeeds. This product is not intended for use in medical or dental implants.
|
AT® 415 | アジア太平洋地域 |
This resin is commonly used for extrusion coating and lamination applications such as envelope stock and thin paper coatings. This resin has excellent adhesion and high line speed capability. This product is not intended for use in medical or dental implants.
|
AT® 474 | アジア太平洋地域 |
This resin is commonly used in Extrusion Coating applications. This product is not intended for use in medical or dental implants.
|
AT® 505 | アジア太平洋地域 |
This resin is commonly used for the production of high strength general purpose packaging and shrink films. This product is not intended for use in medical or dental implants.
|
AT® 520 | アジア太平洋地域 |
This resin is commonly used for general film applications. This product is not intended for use in medical or dental implants.
|
AT® 525 | アジア太平洋地域 |
This resin is commonly used for shrink films and general pupose packaging. This product is not intended for use in medical or dental implants.
|
AT® 7110 | アジア太平洋地域 |
This resin is commonly used for packaging material for food, nutrient and pharmaceutical ingredients, as well as in medical device applications.
|
AT® 7205 | アジア太平洋地域 |
This resin is commonly used for blow molding and extruded tubing applications due to its high strength, excellent environmental stress crack resistance, and good gloss. This product is not intended for use in medical or dental implants.
|
AUROlen® PE-LD black | 欧州 |
AUROlen® PE-LD black is a regranulated low density polyethylene injection molding grade. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Caps, Closures, Lids
|
AUROlen® PE-LD natural | 欧州 |
AUROlen® PE-LD natural is a regranulated low density polyethylene injection molding grade. Contains sorted post-industrial plastic parts and sprues.
Typical Applications: Caps, Closures, Lids
|
AuroraGuard™ GPE3003-70 | アジア太平洋地域 |
Flame Retardant Concentrate in Linear Low-Density Polyethylene
Note: Additional custom color matching is available upon request.
GPE3003-70 is a 70% active, PE based flame retardant concentrate with a 1.80 g/cm3 Gravity and Melt Flow Index of 7g/10 minutes designed to impart flame resistance to polyolefin. Dependent upon let-down ratio in extrusion or molding grade resins, GPE3003-70 can provide a range of V-2 to V-0 flammability UL-94 ratings.
GPE3003-70 can be formulated to comply with RoHS requirements as well as with or without a UV package.
GPE3003-70 performance in a specific resin system may be submitted to Underwriters Laboratories for confirmatory UL Recognition.
|
AuroraTec™ LDPE02NA | アジア太平洋地域 |
LDPE, Barefoot
Formerly known as EnLene LDPE02NA
|