Homo PLA: impact modified PLA blends based on monomers from Purac offer: - Heat resistance up to 120°C (HDT B) - Good processing economics - Impact resistance comparable to ABS - Biobased content - Multiple end-of-life options - Existing commercial availability Blend C: to achieve an ABS type of impact resistance, blend A was impact modified. In order to minimize the drop in modulus, talc was added to this blend (see blend C in the table below).

PURASORB PC 12 is a GMP grade homopolymer of e-caprolactone with an inherent viscosity midpoint of 1.2 dl/g. It is supplied in the form of white to light tan granules. PURASORB PC 12 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PD 24 is a GMP grade homopolymer of D-lactide with an inherent viscosity midpoint of 2.4 dl/g. It is supplied in the form of white to light tan granules. PURASORB PD 24 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PD 38 is a GMP grade homopolymer of D-lactide with an inherent viscosity midpoint of 3.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PD 38 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PDL 20 is a GMP grade copolymer of DL-lactide with an inherent viscosity midpoint of 2.0 dl/g. It is supplied in the form of white to light tan granules. PURASORB PDL 20 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PDL 45 is a GMP grade copolymer of DL-lactide with an inherent viscosity midpoint of 4.5 dl/g. It is supplied in the form of white to light tan granules. PURASORB PDL 45 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PDLG 5010 is a GMP grade copolymer of DL-lactide and Glycolide in a 50/50 molar ratio and with an inherent viscosity midpoint of 1.0 dl/g. It is supplied in the form of white to light tan granules. PURASORB PDLG 5010 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PDLG 8531 is a GMP grade copolymer of DL-lactide and Glycolide in a 85/15 molar ratio and with an inherent viscosity midpoint of 3.1 dl/g. It is supplied in the form of white to light tan granules. PURASORB PDLG 8531 is primarily used for drug delivery applications and is suitable for all commonly used formulation techniques.

PURASORB PG S is a GMP grade homopolymer of Glycolide with an inherent viscosity midpoint of 1.4 dl/g. It is supplied in the form of light yellow to tan pellets. PURASORB PG S is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 10 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 1.05 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 10 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 18 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 1.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 18 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 24 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 2.4 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 24 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 32 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 3.2 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 32 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 38 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 3.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 38 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 49 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 4.9 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 49 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PL 65 is a GMP grade homopolymer of L-lactide with an inherent viscosity midpoint of 6.5 dl/g. It is supplied in the form of white to light tan granules. PURASORB PL 65 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLC 7015 is a GMP grade copolymer of L-lactide and e-caprolactone in a 70/30 molar ratio and with an inherent viscosity midpoint of 1.5 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLC 7015 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLC 8516 is a GMP grade copolymer of L-lactide and e-caprolactone in a 85/15 molar ratio and with an inherent viscosity midpoint of 1.6 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLC 8516 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLC 9517 is a GMP grade copolymer of L-lactide and e-caprolactone in a 95/05 molar ratio and with an inherent viscosity midpoint of 1.7 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLC 9517 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLC 9538 is a GMP grade copolymer of L-lactide and e-caprolactone in a 95/05 molar ratio and with an inherent viscosity midpoint of 3.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLC 9538 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLD 9620 is a GMP grade copolymer of L-lactide and D-lactide in a 96/04 molar ratio and with an inherent viscosity midpoint of 2.0 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLD 9620 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLD 9655 is a GMP grade copolymer of L-lactide and D-lactide in a 96/04 molar ratio and with an inherent viscosity midpoint of 5.5 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLD 9655 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLDL 7028 is a GMP grade copolymer of L-lactide and DL-lactide in a 70/30 molar ratio and with an inherent viscosity midpoint of 2.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLDL 7028 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLDL 7038 is a GMP grade copolymer of L-lactide and DL-lactide in a 70/30 molar ratio and with an inherent viscosity midpoint of 3.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLDL 7038 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLDL 7060 is a GMP grade copolymer of L-lactide and DL-lactide in a 70/30 molar ratio and with an inherent viscosity midpoint of 6.0 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLDL 7060 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLDL 8038 is a GMP grade copolymer of L-lactide and DL-lactide in a 80/20 molar ratio and with an inherent viscosity midpoint of 3.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLDL 8038 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLDL 8058 is a GMP grade copolymer of L-lactide and DL-lactide in a 80/20 molar ratio and with an inherent viscosity midpoint of 5.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLDL 8058 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 1017 is a GMP grade copolymer of L-lactide and Glycolide in a 10/90 molar ratio and with an inherent viscosity midpoint of 1.7 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 1017 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 8055 is a GMP grade copolymer of L-lactide and Glycolide in a 82/18 molar ratio and with an inherent viscosity midpoint of 5.5 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 8055 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 8218 is a GMP grade copolymer of L-lactide and Glycolide in a 82/18 molar ratio and with an inherent viscosity midpoint of 1.8 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 8218 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 8523 is a GMP grade copolymer of L-lactide and Glycolide in a 85/15 molar ratio and with an inherent viscosity midpoint of 2.3 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 8523 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 8531 is a GMP grade copolymer of L-lactide and Glycolide in a 85/15 molar ratio and with an inherent viscosity midpoint of 3.1 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 8531 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PURASORB PLG 8560 is a GMP grade copolymer of L-lactide and Glycolide in a 85/15 molar ratio and with an inherent viscosity midpoint of 6.0 dl/g. It is supplied in the form of white to light tan granules. PURASORB PLG 8560 is primarily used for medical device applications and is suitable for all commonly used polymer processing techniques.

PLA resin for 3D printing

Biodegradable resins are expected to contribute to the reduction of environmental problems caused by synthetic resins. Since polylactic acid (PLA) is one of the promising candidates, we have developed a PLA coating agent RESEM W-990 as an easy-to-use emulsion. By applying W-990 to a substrate such as paper or film and heat-treating it, a coating with PLA characteristics is easily finished on its surface. Features - Easy to handle. - Provide excellent heat seal performance. - Suitable for such as food contact paper package, because composed of only biodegradable materials and safe materials. Application Area - Heat seal performance for paper coatings. RESEM PLA emulsions are waterborne coating consistings of Poly Lactic Acid (PLA). The key features are Biodegradable plastic, Biopolymer, Environmetal-frendly coating, food and industrial paper packaging, contribution of circular economy, reduction of waste problems, solvent free, 100% Compostable and heat-sealable agents. This water-based coating is recommended for a wide range of coating applications to develop new products to solve environmental issues.

Biodegradable resins are expected to contribute to the reduction of environmental problems caused by synthetic resins. Since polylactic acid (PLA) is one of the promising candidates, we have developed a PLA coating agent RESEM Y-225 as an easy-to-use emulsion. By applying Y-225 to a substrate such as paper or film and heat-treating it, a coating with PLA characteristics is easily finished on its surface. Features - Easy to handle. - Provide excellent heat seal performance. - Suitable for such as food contact paper package, because composed of only biodegradable materials and safe materials. Application Area - Heat seal performance for paper coatings. RESEM PLA emulsions are waterborne coating consistings of Poly Lactic Acid (PLA). The key features are Biodegradable plastic, Biopolymer, Environmetal-frendly coating, food and industrial paper packaging, contribution of circular economy, reduction of waste problems, solvent free, 100% Compostable and heat-sealable agents. This water-based coating is recommended for a wide range of coating applications to develop new products to solve environmental issues.

Hisun Biomaterials PLA polymer REVODE101 is a thermoplastic resin derived from annually renewable resources and is specifically designed for sheet extrusion applications. Many products can be produced from REVODE101, and the application field of this resin is extended gradually. Suitable products including: cold drink cup, fruit container, salad plate, fruit plate, egg tray, electronics tray, IC card, cup lid or cake lid and etc.