A RoHS compliant, lead-free, low smoke generating, highly flame-retardant jacketing and insulation compound designed for Plenum cable applications. The compound exhibits excellent processability and electrical properties. FS-1000H is AOM free alloy.

A Polyolefin based, highly flame retardant, zero halogen compound

An Olefin-based, zero halogen, low smoke, flame retardant compound with good processing and mechanical characteristics and good surface quality. Note: Additional custom color matching is avaliable upon request.

An Olefin-based radiation cross-linkable, zero halogen, low smoke, flame retardant compound with good processing and mechanical characteristics and good surface quality. Note: Additional custom color matching is available upon request.

Flexible, TPO based, Low Smoke, Zero Halogen compound, exhibiting good processing characteristics with excellent physical and low temperature properties. Note: Additional custom color matching is avaliable upon request.

A Polyolefin based, highly flame retardant, zero halogen compound with extra mar and scratch resistance.

The GTPO8102EGS compound is an FR, olefin based insulation and jacketing compound for appliance, flat ribbon and heat trace wire applications. It is formulated to meet the UL VW 1 and CSA C22 2 No. 0.6 flame tests. Compound is RoHS compliant.

The GTPO8102EGSUV compound is an FR, UV, olefin based insulation and jacketing compound for appliance, flat ribbon and heat trace wire applications. It is formulated to meet the UL VW 1 and CSA C22 2 No. 0.6 flame tests. Compound is RoHS compliant. GTPO8102EGSUV is suitable for 1000 hour sunlight resistance applications.

The GTPO8102ROHS compound is an FR, UV, olefin-based insulation and jacketing compound for appliance, flat ribbon and heat trace wire applications. It is formulated to meet the UL VW-1 and CSA C22-2 No. 0.6 flame tests and is suitable for 105°C continuous use. Compound is RoHS compliant. Note: Additional custom color matching is avaliable upon request.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements. Note: Additional custom color matching upon request.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements. Note: Additional custom color matching upon request.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements.

A Polyolefin based, highly flame retardant, zero halogen jacketing material designed to pass CSA Teck 90 requirements. This compound features enhanced scratch and mar resistance and is designed to have a lower COF to aide in ease of cable pull-through and installation.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements with extra mar and scratch resistance.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements with extra mar and scratch resistance.

A Polyolefin based, highly flame retardant, zero halogen compound designed to pass CSA Teck 90 requirements with extra mar and scratch resistance.

Bondyram® 7003 is a maleic anhydride modified polyolefin elastomer recommended for toughening of polyamide 6, polyamide 66 and other polyamide compounds. This product is food contact standards compliant.

Bondyram® 7103 is a maleic anhydride modified Polyolefin elastomer specially designed for toughening of Polyamide 6. The product is also recommended to toughening Polyamide 66 and other Polyamide compounds. , This product is food contact standards compliant.

Bondyram® 7107 is a maleic anhydride modified Polyolefin elastomer specially designed for toughening of Polyamide 6. The product is also recommended to toughening Polyamide 66 and other Polyamide compounds. , This product is food contact standards compliant.

Bondyram® 7108 is a Maleic Anhydride Modified Polyolefin Elastomer specially designed for toughening of polyamide 6, polyamide 66 and polyamide 12 with outstanding performance at low temperatures of -40oC. , This product is food contact standards compliant.

Bondyram® 7109 is a Maleic Anhydride Modified Polyolefin especially designed for toughening of Polyamide compounds with and without glass, the product is recommended for toughening PA6 and 66. , This product is food contact standards compliant.

FR4810 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, black jacketing compound combining with flexibility and exceptional fluid resistance. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Magnesium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%. Its excellent flame retardancy is achieved by an inorganic filler and a novel char-forming additive. Applications FR4810 is designed for: -90°C rated jacket for energy cables with high flame retardancy required The high operating temperatures and durability (abrasion resistance, hardness) of FR4810 makes it an attractive solution for energy cables installed in industrial areas, tunnels, ducts The ability of this compound to be used for both internal and external applications is valuable as it avoids the requirement of cable splicing at building service entrances. It can be used in areas sensitive to smoke or corrosive and toxic combustion products. In general, FR4810 has sufficient flame retardancy to satisfy bunched cable vertical burning tests. Specifications FR4810 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: - ISO 1872-PE, KCGH, 33-D001 - ASTM D 1248 Type I, Class C, Category 4 The following cable material standards are met by FR4810: - EN 50290-2-27 - EN 50363-8 TM7 - VDE 0207 Teil 24 (HM4) - BS 7655 LTS2 Cables manufactured with FR4810 using sound extrusion practice normally comply with the following cable product standards: - IEC 60502, Part 1, Type ST3, ST8 Special Features FR4810 consists of specially selected components to offer: - Low smoke and reduced toxic or corrosive gas emissions - Excellent processing properties - High mechanical strength and toughness - Superb system ageing compatibility - Low water permeability - UV resistance - Processability on most PVC/PE extrusion equipment - No need for pre-drying normally

WD955CF is a polyolefin resin suitable for the manufacturing of unoriented peelable cast films on chill roll processes. CAS-No. 9010-79-1 CAS-No. 9002-88-4

WE950CF is a polyolefin resin suitable for the manufacturing of non-oriented sterilisable peelable cast films on chill roll processes. CAS-No. 9010-79-1 CAS-No. 9002-88-4

PP4821 is a thermoplastic, non-halogen containing, insulation compound based on a polypropylene copolymer. The composition of PP4821 is based on the elements Carbon and Hydrogen. Compounds based on these elements will therefore be the only significant constituents of the fumes due to the combustion of this product. Other elements may be present in concentrations less than 0.1% Applications PP4821 is designed for: 70°C rated insulation for building wires (installation cables), flexible cords, power cables It can be used in areas sensitive to smoke or corrosive and toxic combustion products. PP4821 is stabilised for use in contact with copper.

WD255CF is a polyolefin resin suitable for the manufacturing of unoriented peelable cast films on chill roll processes. CAS-No.: 9010-79-1 CAS-No.: 9002-88-4 Applications WD255CF is recommended for: - Food packaging - Lidding film - Lamination films Additives WD255CF contains antiblock and slip agents Additives Content Antiblock (SiO2) 1000 ppm Borealis Method Slip (EAA) 1100 ppm Borealis Method Special features WD255CF is optimised to deliver: - Seal- and peelable against itself - Non sterilisable - Seal- and peelable against Polypropylene

Filler MB Description CALFIN 1152CF is a polyolefin based masterbatch highly filled with fine treated calcium carbonate. It is designed for use in cast-film applications based on HDPE, LLD/LDPE and PP to improve optical and mechanical properties whilst providing significant cost reduction potential. It can be used as an anti-block agent as well. Application CALFIN 1152CF is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application and film structure it can be used from 5% to 40%.

Filler MB Description CALFIN 1152WA is a polyolefin based masterbatch highly filled with fine treated calcium carbonate. It is designed for use in film applications such as HDPE or LLD/LDPE shopping bags to improve optical and mechanical properties whilst providing significant cost reduction potential. It can be used as an antiblock agent. Furthermore it presents bluish white shade to the final film. Application CALFIN 1152WA is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. CALFIN 1152WA is specially designed for high level usage up to 50%.

Filler MB Description CALFIN 1154CFW is a polyolefin based masterbatch filled with a fine treated calcium carbonate. It is designed for use in mono and multilayer blown or cast film applications based on HDPE, LLD/LDPE and PP to improve optical and mechanical properties such as stiffness, dart-drop impact resistance, printability, sealability and thermal conductivity whilst providing significant cost reduction potential due to replacing white MB and base polymer partially. It can be used as an anti-block agent as well. Furthermore it presents bluish white shade to the final film. Application CALFIN 1154CFW is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application and film structure it can be used from 5% to 60%. It should be stored in cool and dry place not to exceed 12 months. CALFIN 1154CFW is applicable for food contact application. For more information please contact us.