- Superior mechanical propertiesand chemical resistance at elevated temperature. - Suitable for solvent resistance applications

- Suitable for extreme high temperature environment. - High heat distortion temperaturewith excellent fatique resistance

- Modified Bisphenol A epoxy vinyl ester resin. - Good heat distortion temperature. - Excellent fatique resistance. - Suitable for compression molding process

- High elongation with high toughness i.e. high impact strength. - Suitable for non-critical corrosive applications

- Vinyl ester primer for concrete, carbon steel, stainless steel and old FRP. - Excellent resilience and adhesion to metal

- Vinyl ester primer for concrete. - Excellent adhesion to concrete. - High heat resistance and excellent chemical resistance

SYMPOXY 1010 - CA809 is a two component, room temperature curing epoxy system with a convenient 2:1 mix ratio by volume. Recommended uses: Electrical potting and encapsulating, industrial surface coating, wood surface coat and seal coat. This product has a high gloss finish, low viscosity, and good water/chemical resistance.

SYMPOXY 1010 - CA810 is a two component, room temperature curing epoxy system with a convenient 1:1 mix ratio by volume. Recommended uses: Electrical potting and encapsulating, industrial surface coating, wood surface coat and seal coat. This product has a high gloss finish, low viscosity, and good water/chemical resistance.

SYMPOXY 1225FR - CA561 is a filled, two component epoxy system that is pigmented black. • 94V - 0 • Thermal Shock Resistant • Low Coefficient of Linear Thermal Expansion Recommended uses: Electrical potting and encapsulating, industrial coating, tooling, and military applications. This product was designed for good thermal shock resistance, excellent adhesion to metals, and long term heat stability at operating temperatures of 325°F.

SYMPOXY 1870 is a two - component, white epoxy system with a convenient 1:1 mix ratio by volume. Recommended uses: This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

SYMPOXY 1873 is a two - component, room temperature curing epoxy system with a convenient 1:1 mix ratio by volume. Recommended uses: This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

SYMPOXY 1960G is a single component epoxy system that is pigmented grey and has the following characteristics: - Flame Retardant to 94 V-0 - Thermal Shock Resistant - Excellent Moisture Resistance - Lightweight SYMPOXY 1960G is typically used for potting electrical components. It is ideal in applications where exothermic or curing temperatures above 85°C cannot be tolerated and where thermal expansion/contraction should not harm delicate components.

SYMPOXY 506 - CA803 is a two component, low viscosity, 100% solids epoxy system designed for maximum impregnation or flow. Recommended uses: Electrical potting and encapsulating, bonding, and coating. This epoxy has high impact strength and thermal shock in castings, relief of internal stress, and exhibits excellent adhesion to metal materials. .

Glass-fibre reinforced epoxy moulding compound Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures Primary application(s): Connectors, Thermocouples, Sensors, Resistors, Potentiometers This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

Glass-fibre reinforced epoxy moulding compound Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures Primary application(s): Connectors, Thermocouples, Sensors, Resistors, Potentiometers This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

Glass-fibre reinforced epoxy moulding compound Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures Primary Application(s): Wirewound inductors, transformers This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

Glass-fibre reinforced epoxy moulding compound Good mechanical and electrical strength, enhanced elasticity for ensuring good sealing under extreme heat and/or humidity, good chemical resistance, exceptional metal adhesion, very good flame retardance. Suitable for pelleting and preheating Primary application(s): Embedding metal parts for metallurgical tests This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

Techsil EP25485 is a low viscosity, thermally conductive flame retardant potting and encapsulating compound. The mixed system has a long usable life and may be hot or cold cured. The system exhibits a good surface finish, high electrical strength, excellent thermal conductivity and low cure shrinkage. EP25485 is compatible with most circuit board components and materials over a wide temperature range. Adhesion is excellent to most plastics and substrates. The combination of properties and the ease of use of the material will lend itself to a wide range of applications. The flame-retardants in EP25485 are of a non-halogen type and do not contain heavy metals. It is available in bulk, kits and twinpack form. The standard colour is Black but other colours are available on request. Features: - Excellent thermal conductivity - High electrical insulating characteristics - Non-toxic - Low shrinkage - High adhesion - Flame retardant to UL94-V0 - Good chemical and water resistance - RoHS and WEEE compliant

One-component Epoxy composition in which carbon fibers are dispersed T&K TOKA's "Tenacis" ™ is an epoxy composite containing milled carbon fiber (MCF) dispersed in high concentration. Our unique dispersion technology prevents separation of the epoxy resin and carbon fibers during heating, resulting in high mechanical strength after heating and curing. Because "Tenacis'' ™ is in liquid form, it can be used for applications such as molding complex shapes, which were previously difficult. In addition, the cured product has the same strength or more than pure aluminum and is less than half the weight. Characteristics of carbon fiber dispersed epoxy resin Tenacis™ EP01 is made by dispersing milled carbon fibers in epoxy resin. When elevated temparature curing, it develops high strength and modulus. T&K TOKA's unique dispersion technology allows it to maintain fluidity, making it suitable for molding. In addition, by combining it with your favorite epoxy resin curing agent, you can give it the desired physical properties and customize it as you like.