Glastic® Grade 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required.

Glastic 1580 is an easily fabricated laminate that exhibits excellent flame resistance. This flame-resistant laminate meets the UL94 V0 specification of Underwriters Laboratories. This material was originally designed to meet the television industry's safety assurance requirements. Glastic 1580 has exceptional flame resistance, arc resistance and a high temperature capability for applications such as flyback transformers and arc stack assemblies.

Grade 1603 is a multi-purpose, moderate strength, low-cost material that is suitable for injection, compression and transfer molding.

Glastic 1603-2A is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1603-2A features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1603-2A are higher than those of conventional plastic insulators.

Glastic 1603-2D is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1603-2D features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1603-2D are higher than those of conventional plastic insulators.

Grade 1605 is an excellent low-cost HB material with low shrink and medium strength. Has excellent surface finish and gloss. Can be injection, compression or transfer molded.

Grade 1608 is a very high-strength, general purpose, corrosion-resistant material. Recommended for compression molding only. UL® Recognized. Meets FDA requirements for food contact.

Glastic 1642-10-E is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1642-10-E features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1642-10-E are higher than those of conventional plastic insulators. Glastic 1642-10-E should not be used upside down if there is a possibility of the center hole being filled with water.

Glastic 1872 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 1872 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 1872 are higher than those of conventional plastic insulators.

Glastic 2015 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2015 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2015 are higher than those of conventional plastic insulators.

Glastic 2035-1 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2035-1 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2035-1 are higher than those of conventional plastic insulators.

Glastic® 210 is a high temperature resin reinforced with glass fibers. Recommended for stator application.

Glastic 2165 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2165 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2165 are higher than those of conventional plastic insulators.

Glastic 2450-15 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2450-15 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2450-15 are higher than those of conventional plastic insulators. Glastic 2450-15 should not be used upside down if there is a possibility of the center hole being filled with water.

Glastic® Grade FHT (Flexible High Temperature) Laminate provides numerous high-performance features and benefits, such as high flexibility and excellent dielectric strength at elevated temperatures. It also exhibits the highest UL temperature index in the industry for a flexible glass-reinforced polyester in 1/32 inch and 1/16 inch thicknesses: 190°C and 200°C respectively (for both electrical and mechanical properties). Part Number: 1800

Glastic SG-200 high-strength and high-temperature laminate offers the same high-performance features and benefits as Glastic's FHT Laminate. In addition, SG-200 offers much higher mechanical strengths than FHT with temperature ratings of up to 210°C. Glastic SG-200 is also a superior replacement material for epoxy-bonded mica in layer insulation applications.

Glastic® SLC-1000 is a medium strength, and low-cost glass-reinforced polyester compound with adjustable shrinkage. It is V-O flame arc and track resistant. UL® recognized.

Glastic T-160 is a high-strength, heat-resistant laminate. This highly creep-resistant material is excellent for applications where electrically insulating materials are subject to physical loading and moderately high temperature.

Glastic TSF 1312 general-purpose laminate is the most cost-effective fiberglass-reinforced laminate sheet available from Glastic. This resin exhibits outstanding punchability in thin thicknesses. It is widely used in motors and dry-type transformers, as well as a variety of other applications.

Glastic UTR 1494 is a fiberglass reinforced thermoset polyester material. It is available in sheet form as well as a wide selection of channel, angle, and tube sizes. These materials are the industry standard for flame and arc/track resistant electrical insulation. In addition, the excellent combination of high strength, flame resistance, and low smoke generation has given it application in many other areas such as transit and marine where safe, yet economical materials are required.

Glastic UTS 141 is a fiberglass-reinforced laminate. This resin is ideal for applications requiring flame and heat resistance, as well as applications requiring higher retention of properties after heat aging. Glastic UTS 141 is ideal for a wide variety of applications, including intricate punchings for switches, switch plates, controls, control panels, and terminal boards.

Glastic UTS 1478 is a fiberglass-reinforced laminate. This resin is ideal for applications requiring flame and heat resistance, as well as applications requiring higher retention of properties after heat aging. Glastic UTS 1478 is ideal for a wide variety of applications, including intricate punchings for switches, switch plates, controls, control panels, and terminal boards.

This IEEE Class F 155°C high strength fiberglass mat reinforced thermoset polyester material exhibits substantial resistance to cold flow or creep under heat and pressure. Suggested applications include motor slot wedges, washers, brush plates and terminal boards. Available in thicknesses - .032" - 2.00". Standard color - Brown. Meets Gov't Specs - LP-509, I-24768/6.

EMD is a glass mat reinforced polyester sheet designed primarily as a "slot wedge" material in large motors and generators. EMD has low weight loss at elevated temperatures and high flexural and shear strength; properties required in demanding "slot wedge" applications. Available thicknesses - .062" - 1.00". Standard color - Black.

Haysite's high performance material that meets NEMA GPO-3 requirements and exceeds NEMA in dielectric strength, arc resistance, and track resistance. This UL recognized grade is highly flame retardant and low smoke generating. ETR-FR-C is a IEEE 130° C electrical / 160° mechanical Class B material. Applications include high voltage appliance insulators, bus bar supports, and barriers in switchgear. Available in thicknesses .032" - 2.00". Standard color - Red. Meets Gov't Spec - I-24768/6.

A NEMA GPO-1 grade fiberglass mat reinforced thermoset polyester molded sheet. ETS is an IEEE Class B 130°C electrical / 160° C mechanical material with good punching characteristics. Typical applications include transformer spacers and supports. Available in .032" - 2.00". Standard color - Buff. Meets Gov't Specs - LP-509, I-24768/6.

A NEMA GPO-2 glass mat reinforced polyester molded sheet. ETS-FR-II is UL recognized with a flame rating of 94V-0 and arc resistance of 185 seconds. This grade is an IEEE Thermal Class B, 130°C electrical/160°C mechanical material. Typical uses are general purpose electrical insulation application where flame retardancy is required. Available thicknesses - .032" - 2.00". Standard color - Red. Meets Gov't Specs - LP-509, I-24768/6.

Haysite Grade 1000 laminate sheet is an outstanding material that is used in applications requiring exceptional weather and corrosion resistance. Grade H1000's unique polyester resin system provides corrosion resistance in sunlight and harsh weather environments in addition to meeting NEMA GPO-3 specifications for track resistance, flame retardance, heat resistance and physical properties. H1000 is particularly qualified for applications in the transportation industry due to its' low smoke generation, low smoke toxicity & halogen-free flame retardants. H1000 meets the rigid New York City Transit - Specification #64. Transit Authorities use Grade H1000 under their 3rd rail ties to provide electrical insulation, corrosion protection, UV resistance & most importantly to insure low smoke/flame toxicity in case of electrical failure. H1000, in a pultruded profile shape is used for electrical insulation for electrical cables, conduit & 3rd rail protection for workers.