Grade H208 has high magnetic permeability and excellent retention of properties after heat aging at elevated temperatures. This unique combination of properties allows Grade H208 to be used in various motor, transformer, coil, and other applications requiring low hysteresis or magnetic flux losses.

H261 is an advanced composite that combines high temperature resistant and high strength characteristics with static dissipative properties for use as wave and reflow solder pallets. SDL Grade H261 may be used as dedicated or adjustable flow solder carriers as well as surface mount pallets. Listed below are the expected performance properties of this material. H261 is available in snaded thicknesses from 3, 5, 6, 8, 10 and 12mm and in sheet sizes 36" x 72" and 48" x 96". Standard color is Black.

A thermoset polyester composite that offers superior energy efficiency, temperature control, and durability for high temperature mold and platen thermal applications. A proven, cost effective product for the plastic and rubber molder. Available in thicknesses from 1/8" - 2.00". Color - Brown.

A thermoset polyester composite that offers superior energy efficiency, temperature control, and durability for high temperature mold and platen thermal applications. A proven, cost effective product for the plastic and rubber molder. Available in thicknesses from 1/8" - 2.00". Color - Orange.

H400 is an advanced composite that combines high temperature resistant and high strength characteristics with static dissipative properties for use as wave and reflow solder pallets. SDL Grade H400 may be used as dedicated or adjustable flow solder carriers as well as surface mount pallets. Listed below are the expected performance properties of this material. H400 is available in snaded thicknesses from 3, 5, 6, 8, 10 and 12mm and in sheet sizes 36" x 72" and 48" x 96". Standard color is Black.

H515 exhibits excellent flexibility and retention of electrical properties at elevated temperatures. For use in 220°C insulation systems in dry type transformers and elsewhere where flexibility and high temperature is required. Standard color is tan. Thickness is 1/32" - 1/16". Sheet sizes are 36" x 72" and 48" x 96".

H722 is an all-purpose GPO-1 fiberglass mat reinforced thermoset polyester molded sheet. Available in thicknesses ranging from .031" - 2.00". Standard color - Natural. Meets Gov't Specs - LP-509, I-24768/6.

H755 is a glass mat reinforced thermoset polyester sheet that meets or exceeds NEMA GPO-1 properties and carries a thermal index of 155°C Electrical/165°C Mechanical. H755 is designed for use in class "F" insulation systems or elsewhere when 165°C material is required. Available thicknesses - .032" - 2.00". Standard color - Ivory. Meets Gov't Specs - LP-509, I-24768/6.

H900 is recognized throughout the world as a reliable, consistent GPO-3 material. Standard size sheets are available in thicknesses ranging from .094" to 2.00". H900 also exhibits excellent smoke, flame and toxicity characteristics. Govt. Spec I-24768/6. Standard color - red.

A breakthrough material in thermal insulation sheet, Heatmeiser® is a specially engineered composite offering superior energy efficiency, temperature control and durability for high temperature mold jacket and platen thermal insulation applications. Heatmeiser thermal conductivity results separate this material from all other glass reinforced products. Available is thicknesses from 1/8" - 2.00". Color - Lt. Gray.

UL, Inc. has granted HST-II the highest thermal recognition ever achieved by any glass polyester laminate (U.L. File No. E81893). HST-II has a 220° C/210° C rating for 1/8" thick and heavier, and a 210° C/210° C rating for 1/32" thick up to 1/8" thick. HST-II is a high temperature polyester laminate that exhibits excellent retention of electrical and mechanical properties at elevated temperatures. Applications for HST-II can be found in high voltage transformers, D.C. motors and elsewhere when materials with high thermal indices are required. Available thicknesses - .031" - 2.00". Standard color - Brown.

HTF exhibits excellent flexibility and retention of electrical properties at elevated temperatures. For use in 220° C insulation systems in dry type transformers and elsewhere where flexibility and high temperature is required. Standard color is tan. Thickness is 1/32" - 1/16". Sheet sizes are 36" x 72" and 48" x 96".

HETRON 197 resin is a non-thixotropic, unpromoted, halogenated, flame retardant") clear polyester. HETRON 197 resin may be used for closed molding applications. HETRON 197 resin can be formulated into other HETRON resins of the 197 series (except HETRON 197AT resin) with the addition of styrene, thixotrope agents or promoters. - Excellent corrosion resistance to acidic and other oxidizing environments - High heat resistance - gases and vapor to 177°C (350°F) - Excellent strength retention at elevated temperatures - Good fire retardancy - Has met ASTM E-84 Class ll rating with 5% antimony trioxide APPLICATIONS AND USE Corrosion resistant fiberglass reinforced plastic equipment including press molded and pultruded pipe, flanges, fittings, pumps, pump housings, mist eliminator blades and other equipment handling corrosive gases, vapors or liquids.

HETRON F 240 TF is a non pre-accelerated, thixotropic flame retardant resin based on a oithophtalic unsaturated polyester containing mineral and organic fillers. It contains neither chlorine nor nitogen. The colour of the resin is white. Application and use HETRON F 240 TF resin can be used in contact moulding, spray-up and cold press applications. It is particulary recommended for finished products which need very good flame retardency and low smoke toxicity, e.g. construction (sanitary etc.), and transport (trains underground/subway).

HETRON F 640 TF is a flame retardant based on unsaturated polyester resin containing mineral fillers. It is a halogen and antimony free resin. HETRON F 640 TF resin is thixotropic, non accelerated and the colour is white. Application and use HETRON F 640 TF resin can be used in hand lay-up and and spray-up applications. The resin is particularly recommended for finished products where very good fire retardancy and low smoke toxicity and opacity are required, e.g. construction (sanitary...), and transport (trains underground/subway).

HETRON FR 650 Series resins are flame retardant polyester resins. Composites made with HETRON FR 650 Series resins have been tested and have achieved a Class 1 Flame Spread per ASTM E-84 without addition of synergists such as antimony trioxide. HETRON FR 650 INF-20 resin is a low viscosity promoted resin optimized for the infusion process. This grade may also be used for resin transfer molding. It exhibits excellent glass wet out properties. APPLICATIONS AND USE HETRON FR 650 Series resins, depending on the grade selected, can be used in hand lay-up, spray-up, filament winding and infused flame retardant applications. Markets include architectural, mass transit, passenger rail, electrical and mine ducting.

HETRON FR 650 Series resins are flame retardant polyester resins. Composites made with HETRON FR 650 Series resins have been tested and have achieved a Class 1 Flame Spread per ASTM E-84 without addition of synergists such as antimony trioxide. HETRON FR 650 T-20 resin is a low viscosity, promoted, thixotropic, version. It exhibits excellent wet-out properties and low drainage when applied to vertical surfaces. This resin is formulated to contain 35% styrene. APPLICATIONS AND USE HETRON FR 650 Series resins, depending on the grade selected, can be used in hand lay-up, spray-up, filament winding and infused flame retardant applications. Markets include architectural, mass transit, passenger rail, electrical and mine ducting.

PRODUCT SERIES: ST 1000 SERIES BMC PRODUCT DESCRIPTION: POLYESTER, VINYLESTER AND HYBRID COMPOSITES

PRODUCT SERIES: ST 1000 SERIES BMC PRODUCT DESCRIPTION: POLYESTER, VINYLESTER AND HYBRID COMPOSITES

PRODUCT SERIES: ST 2000 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER COMPOSITES

PRODUCT SERIES: STC 2200 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER/VINYLESTER HYBRID COMPOSITES

PRODUCT SERIES: STC 2200 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER/VINYLESTER HYBRID COMPOSITES

PRODUCT SERIES: STC 2300 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER URETHANE HYBRID COMPOSITES

PRODUCT SERIES: STC 2300 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER URETHANE HYBRID COMPOSITES

PRODUCT SERIES: STC 2300 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER URETHANE HYBRID COMPOSITES

Type: Unsaturated Polyester moulding compound, glass fiber reinforced Suggested uses: H4 and H7 lamp sockets Processes: Injection molding. Compression molding. Benefits: Heat resistant. Low viscosity. Styrene free. Tracking resistance 600 V.