LLHF-0826A is a certified prime grade Ethylene-Hexene Copolymer designed for production of superior strength and high stiffness Blown films. LLHF-0826A features good processability and films exhibit high impact strength, exceptional creep resistance, good tensile and tear resistances. LLHF-0826A major applications include heavy duty bags, shipping sacks, high strength liners, grocery bags and frozen food packaging films. Maximum recommended film drawdown is 0.5 mil. LLHF-0826A contains no slip and no antiblock. LLHF-0826A complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-116XF is a certified prime, Super-Hexene Copolymer developed for blown film with outstanding Impact Strength and Toughness. LLHF-116XF features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLHF-116XF major applications include high strength liners (industrial and consumer), super strong carry-on-bags and industrial packaging. LLHF-116XF contains High slip and High antiblock. LLHF-116XF complies with FDA regulation 21CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. LLHF-116XF also complies with most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-117XA is a certified prime grade Ethylene-Hexene Copolymer specially developed for extrusion of SUPER STRENGTH Blown films of outstanding Impact and Toughness. LLHF-117XA features good processability and films exhibit exceptional Elmendorf Tear strength and Puncture resistance. LLHF-117XA major applications include super strong liners, lamination films, stretch wrapping films, and super strong carry-on-bags. Maximum recommended film drawdown is 0.3 mil. LLHF-117XA contains no slip and no antiblock. LLHF-117XA complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-117XJ is a certified prime, Ethylene-Hexene Copolymer developed for extrusion of Super Strength blown films needing outstanding impact and Toughness. LLHF-117XJ features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLHF-117XJ major applications include high strength liners (industrial and consumer), super strong carry-on-bags and industrial packaging. LLHF-117XJ contains No slip and High antiblock. LLHF-117XJ complies with FDA regulation 21CFR 177.1520(c)3.2a, conditions of use B - H as described in Table 2 of 21 CFR 176.170(c). LLHF-117XJ also complies with most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-118A is a certified prime resin with Hexene-comonomer, designed for production of Blown films used in general purpose packaging. LLHF-118A features an excellent combination of easy processability, very good film strength and a broad heat sealing temperature range. LLHF-118A applications include shipping sacks, ice bags, stretch film and liners. LLHF-118A contains no slip or no antiblock. LLHF-118A complies with FDA regulation 21CFR 177.1520(c)3.1a (conditions of use C-H) and with most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-120B is a certified prime resin containing Hexene-comonomer designed for production of superior strength and low stiffness Blown films. LLHF-120B features easy processability and films exhibit high impact strength, very good tear and excellent creep resistances. LLHF-120B major applications include heavy duty bags, high strength liners, grocery bags and frozen food packaging. Maximum recommended film drawdown is 0.5 mil. LLHF-120B contains no slip and medium antiblock.

LLHF-120C is a certified prime resin containing Hexene-comonomer designed for production of superior strength and low stiffness Blown films. LLHF-120C features easy processability and films exhibit high impact strength, very good tear and excellent creep resistances. LLHF-120C major applications include heavy duty bags, high strength liners, grocery bags and frozen food packaging. Maxim um recommended film drawdown is 0.5 mil. LLHF-120C contains medium slip and medium antiblock.

LLHF-120F is a certified prime resin with Hexene-comonomer, designed for production of Blown films used in general purpose packaging. LLHF-120F features an excellent combination of easy processability, very good film strength and a broad heat sealing temperature range. LLHF-120F applications include shipping sacks, ice bags, stretch film and liners. LLHF-120F contains high slip and high antiblock. LLHF-120F complies with FDA regulation 21CFR 177.1520(c)3.1a and with most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-122D is a certified prime resin containing Hexene-comonomer designed for production of superior strength and low stiffness Blown films. LLHF-122D features easy processability and films exhibit high impact strength, very good tear and excellent creep resistances. LLHF-122D major applications include heavy duty bags, high strength liners, grocery bags and frozen food packaging. Maxim um recommended film drawdown is 0.5 mil. LLHF-122D contains medium slip and high antiblock.

LLHF-122XH is a certified prime grade Ethylene-Hexene Copolymer specially developed for BLOWN FILM extrusion for applications requiring SUPER STRENGTH with outstanding Impact and Toughness. LLHF-122XH features exceptional Elmendorf Tear strength for maximum downgauging potential. LLHF-122XH major applications include super strong liners, and high performance strength films. Maximum recommended film drawdown is 0.35 mil. LLHF-122XH contains high slip and extra high antiblock. LLHF-122XH complies with FDA regulation 21CFR177.1520 (c) 3.1(a) + 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLHF-123F is a certified prime grade Ethylene-Hexene Copolymer designed for production of high strength GP packaging Blown Films. LLHF-123F features good processability and films exhibit exceptional toughness, superior dart impact strength, high Elmendorf Tear resistance, and excellent Creep resistance. LLHF-123F major applications include high strength liners, heavy duty bags, grocery bags, and frozen food packaging. Maximum recommended film drawdown is 0.5 mil. LLHF-123F contains high slip and high antiblock. LLHF-123F complies with FDA regulation 21CFR 177.1520(c) 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

LLHG-1522A is a certified prime grade Ethylene-Hexene Copolymer High Molecular Weight specially developed for Geomembrane extrusion applications requiring outstanding balance of optimal ESCR, Toughness, and excellent Flexibility. LLHG-1522A offers very good processability, broad fusion range, excellent melt strength, and improved output and texture appearance surface. LLHG-1522A major applications include landfill covers and caps, coextruded cap layers for HDPE, tubular and flat die projects, blends with HDPE, and as carrier resin for Masterbatch compounds. LLHG-1522A contains no slip or antiblock, and complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles.

LLI-10030 is a certified prime resin specially designed for injection molding applications requiring good low temperature resistance. LLI-10030 features superior processability , excellent low temperature toughness, gloss, and ESCR. LLI-10030 conforms with FDA regulation 21CFR 177.1520 for food contact articles.

LLI-2024 is a certified prime resin specially designed for injection molding applications requiring good low temperature resistance and low warpage. LLI-2024 features easy processability over a wide range of molding conditions. LLI-2024 applications include housewares, closures, caps, medical parts, and toys where toughness, high impact resistance and high gloss are required. Recommended processing temperature is180 to 220°C., with mold at 20 to 40°C.

LLI-3525 is a certified prime grade designed for INJECTION MOLDING applications requiring excellent impact strength and environmental stress crack resistance. LLI-3525 features excellent low temperature impact strength, good processability and rigidity. LLI-3525 applications include general purpose injection molding applications. LLI-3525 recommended processing temperature is 180 to 220°C. with mold @ 20 to 40°C.. LLI-3525 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) and most international regulations concerning the use of Polyethylene in contact with food articles.

LLI-5026 is a certified prime copolymer designed for High-Flow INJECTION MOLDING of thin-walled, high quality applications. LLI-5026 features easy processability over a wide range of molding conditions, fast cycle times, good rigidity, high gloss surface, low temperature toughness and warpage free moldings. LLI-5026 applications include housewares, margarine tubs, containers, trash cans, toys, lids, closures and caps. Suggested processing temperature is 170 to 210°C, with the mold at 20 to 40°C. LLI-5026 complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles.

LLI-5026G is a certified prime, granular copolymer designed for easing blending with pigments, slip and antiblock additives and other materials making it an excellent base resin for masterbatch products. LLI-5026G complies with FDA regulation 21CFR 177.1520 (c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles.

Stretch films manufactured with Clearflex H&T CHH 196 BA have outstanding fracture mechanical properties, mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. It is recommended for production of super-power stretch films. Its properties, especiallyin terms of holding force and puncture resistance, make Clearflex H&T CHH 196 BA the ideal choice for packaginggoods of irregular shape and for applications requiring a superior mechanical strength. Sustainability The “bio attributed” product Clearflex H&T CHH 196 BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T CHH 196 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex H&T CHH 196 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex H&T CHH 196 BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Stretch films manufactured with Clearflex H&T CHH 196 BCA have outstanding fracture mechanical properties, mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. It is recommended for production of super-power stretch films. Its properties, especially in terms of holding force and puncture resistance, make Clearflex H&T CHH 196 BCA the ideal choice for packaging goods of irregular shape and for applications requiring a superior mechanical strength. Sustainability The “bio circular attributed” product Clearflex H&T CHH 196 BCA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T CHH 196 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex H&T CHH 196 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T CHH 196 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T CHH 196 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion. Stretch films manufactured with Clearflex H&T CHH 196 have outstanding fracture mechanical properties, mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. Main Applications Clearflex H&T CHH 196 is recommended for production of super-power stretch films. Its properties, especially in terms of holding force and puncture resistance, make Clearflex H&T CHH 196 the ideal choice for packaging goods of irregular shape and for applications requiring a superior mechanical strength.

Stretch films manufactured with Clearflex H&T CLH 196 BA have outstanding fracture mechanical properties,mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. Moreover, the holdingforce is the key property of these films when used in automatic wrapping machines. Clearflex H&T CLH 196 BA is recommended for production of super-power stretch films. Its properties, especially in terms of holding force and puncture resistance, make Clearflex H&T CLH 196 BA the ideal choice for packaging goods of irregular shape and for applications requiring a superior mechanical strength. Sustainability The “bio attributed” product Clearflex H&T CLH 196 BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T CLH 196 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex H&T CLH 196 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex H&T CLH 196 BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Stretch films manufactured with Clearflex H&T CLH 196 BCA have outstanding fracture mechanical properties, mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. Moreover, the holding force is the key property of these films when used in automatic wrapping machines. Clearflex H&T CLH 196 BCA is recommended for production of super-power stretch films. Its properties, especially in terms of holding force and puncture resistance, make Clearflex H&T CLH 196 BCA the ideal choice for packaging goods of irregular shape and for applications requiring a superior mechanical strength. Sustainability The “bio circular attributed” product Clearflex H&T CLH 196 BCA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T CLH 196 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex H&T CLH 196 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T CLH 196 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T CLH 196 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion. Stretch films manufactured with Clearflex H&T CLH 196 have outstanding fracture mechanical properties, mainly Elmendorf tear strength along machine direction (MD) and puncture resistance. Main Application Clearflex H&T CLH 196 is recommended for production of super-power stretch films. Its properties, especially in terms of holding force and puncture resistance, make Clearflex H&T CLH 196 the ideal choice for packaging goods of irregular shape and for applications requiring a superior mechanical strength.

Clearflex H&T DFH 20 BA exhibits a typical wide molecular weights distribution which gives an excellent processability together with good mechanical characteristics. It is mainly designed for the production of micro-irrigation tubes, durable hoses and pipes, extruded profiles and for the production by injection molding of fittings. The outdoor use, requires the additivation with anti-UV, to maintain excellent performance even after prolonged periods of exposure to sunlight. Sustainability The product Clearflex H&T DFH 20 BA ‘Bio attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T DFH 20 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low density polyethylene, butene comonomer, produced by Unipol gas phase technology and suitable for extrusion. The production of Clearflex H&T DFH 20 BA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T DFH 20 BA will be bio circular attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T DFH 20 BCA exhibits a typical wide molecular weights distribution which gives an excellent processability together with good mechanical characteristics. It is mainly designed for the production of micro-irrigation tubes, durable hoses and pipes, extruded profiles and for the production by injection molding of fittings. The outdoor use, requires the additivation with anti-UV, to maintain excellent performance even after prolonged periods of exposure to sunlight. Sustainability The product Clearflex H&T DFH 20 BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T DFH 20 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low density polyethylene, butene comonomer, produced by Unipol gas phase technology and suitable for extrusion. The production of Clearflex H&T DFH 20 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T DFH 20 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex DFH 20 is a Linear Low Density Polyethylene Resin butene comonomer produced by Unipol gas phase technology. Clearflex DFH 20 exhibits a typical wide molecular weights distribution which gives an excellent processability together with good mechanical characteristics. Main Applications Clearflex DFH 20 is mainly designed for the production of micro-irrigation tubes, durable hoses and pipes, extruded profiles and for the production by injection molding of fittings. The outdoor use, requires the additivation with anti-UV, to maintain excellent performance even after prolonged periods of exposure to sunlight.

Clearflex H&T FGH 196 A BA for its overall characteristics is the right choice for applications like silage stretch film, low thickness and high clarity packaging film requiring superior mechanical strength. Moreover, the excellent weldability behavior makes it ideal for lamination film production. Films obtained from Clearflex H&T FGH 196 A BA show excellent optical properties, a wide sealing window, both hot tack and heat seal, together with a low sealing initiation temperature (S.I.T.), outstanding impact, puncture and Elmendorf tear resistance. Sustainability The “bio attributed” product Clearflex H&T FGH 196 A BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T FGH 196 A BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for blown film technology. The production of Clearflex H&T FGH 196 A BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex H&T FGH 196 A BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T FGH 196 A BCA for its overall characteristics is the right choice for applications like silage stretch film, low thickness and high clarity packaging film requiring superior mechanical strength. Moreover, the excellent weldability behavior makes it ideal for lamination film production. Films obtained from Clearflex H&T FGH 196 A BCA show excellent optical properties, a wide sealing window, both hot tack and heat seal, together with a low sealing initiation temperature (S.I.T.), outstanding impact, puncture and Elmendorf tear resistance. Sustainability The “bio circular attributed” product Clearflex H&T FGH 196 A BCA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T FGH 196 A BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for blown film technology. The production of Clearflex H&T FGH 196 A BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T FGH 196 A BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T FGH 196 A is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants and processing aid, suitable for blown film extrusion. Films obtained from Clearflex H&T FGH 196 A show excellent optical properties, a wide sealing window, both hot tack and heat seal, together with a low sealing initiation temperature (S.I.T.) and outstanding impact, puncture and Elmendorf tear resistance. Main Application Clearflex H&T FGH 196 A, for its overall characteristics, is the right choice for all applications, like silage stretch film, low thickness high clarity packaging film, requiring a superior mechanical strength. Moreover, the excellent sealability behaviour makes it ideal for lamination film production.

Clearflex H&T FGH B0 BA, is recommended to produce blown film requiring a combination of optical properties, puncture resistance and impact strength and very good sealability. Clearflex H&T FGH B0 BA is also recommended in the production of lamination film. Sustainability The “bio attributed” product Clearflex H&T FGH B0 BA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T FGH B0 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene made by proprietary enhanced Z-N catalyst, suitable for blown film technology. The resin, containing antioxidants, is characterized by a very low density and high molecular weight. The production of Clearflex H&T FGH B0 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex H&T FGH B0 BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T FGH B0 BCA, is recommended to produce blown film requiring a combination of optical properties, puncture resistance and impact strength and very good sealability. Clearflex H&T FGH B0 BCA is also recommended in the production of lamination film. Sustainability The “bio circular attributed” product Clearflex H&T FGH B0 BCA is a highly sustainable VLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex H&T FGH B0 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene made by proprietary enhanced Z-N catalyst, suitable for blown film technology. The resin, containing antioxidants, is characterized by a very low density and high molecular weight. The production of Clearflex H&T FGH B0 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex H&T FGH B0 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex H&T FGH B0 is a linear low density polyethylene, made by proprietary enhanced Z-N catalyst, suitable for blown film technology. The resin, containing antioxidants, is characterized by a very low density and high molecular weight. Compared to std Clearflex VLDPE grades, Clearflex H&T FGH B0 offers lower seal initiation temperature, excellent optical properties and mechanical performances. Main Application Clearflex H&T FGH B0 is recommended to produce blown film requiring a combination of optical properties, puncture resistance and impact strength and very good sealability. Clearflex H&T FGH B0 is also recommended in the production of Lamination film.

Clearflex CL 106 BA is recommended for the production of low cling cast film with high optical properties and goodmechanical resistance. It is ideal for the production of power stretch film characterized by a medium prestretch. Films manufactured with Clearflex CL 106 BA are characterised by high clarity, optimum elongation at break,optimum impact and tear resistance. Sustainability The “bio attributed” product Clearflex CL 106 BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL 106 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex CL 106 BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex CL 106 BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL 106 BCA is recommended for the production of low cling cast film with high optical properties and goodmechanical resistance. It is ideal for the production of power stretch film characterized by a medium prestretch. Films manufactured with Clearflex CL 106 BCA are characterised by high clarity, optimum elongation at break,optimum impact and tear resistance. Sustainability The “bio circular attributed” product Clearflex CL 106 BCA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex CL 106 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a linear low-density polyethylene, hexene comonomer (C6-LLDPE), added with antioxidants and suitable for cast film technology. The production of Clearflex CL 106 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex CL 106 BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex CL 106 is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for cast film extrusion. Films manufactured with Clearflex CL 106 are characterised by high clarity, optimum elongation at break, optimum impact and tear resistance. The product is particularly suitable for extrusion at low thicknesses. Main Application Clearflex CL 106 is recommended for the production of low cling cast film with high optical properties and good mechanical resistance. It is ideal for the production of power stretch film characterized by a medium prestretch.

Film manufactured with Clearflex FF 106 A BA are characterised by high optical properties (haze, gloss), optimumimpact, tear and puncture resistance. It is recommended for the production of blown stretch film for agriculture, incoextrusion or blending with LDPE. Because of its excellent bubble stability, Clearflex FF 106 A BA is theideal choice for the production of low gauge film where high mechanical properties are required. Sustainability The “bio attributed” product Clearflex FF 106 A BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FF 106 A BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion. The production of Clearflex FF 106 A BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex FF 106 A BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Film manufactured with Clearflex FF 106 A BCA are characterised by high optical properties (haze, gloss), optimum impact, tear and puncture resistance. It is recommended for the production of blown stretch film for agriculture, in coextrusion or blending with LDPE. Because of its excellent bubble stability, Clearflex FF 106 A BCA is the ideal choice for the production of low gauge film where high mechanical properties are required. Sustainability The product Clearflex FF 106 A BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FF 106 A BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion. The production of Clearflex FF 106 A BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex FF 106 A BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex FF 106 A is a hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion. Film manufactured with Clearflex FF 106 A are characterised by high optical properties (haze, gloss), optimum impact, tear and puncture resistance. Main Application Clearflex FF 106 A is recommended for the production of blown stretch film, low gauge agricultural, in coextrusion or blending with LDPE. Because of its excellent bubble stability, Clearflex FF 106 A is the ideal choice for the production of low gauge film where high mechanical properties are required.

Clearflex FG 106 A BA properties include: superior film toughness and strength, potential downgauging, superioroptical properties and outstanding sealing performance. It is recommended for agricultural film, blown stretch film, barrier food packaging, form filland seal packaging, lamination film. Improved toughness, excellent sealability and high throughput are justsome of the benefits which add value to our customers across the supply chain. Sustainability The “bio attributed” product Clearflex FG 106 A BA is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FG 106 A BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion. The production of Clearflex FG 106 A BA allows to contribute to the circular economy, since the bionafta used derives from renewable sources (e.g. vegetable oils). Clearflex FG 106 A BA will be bio attributed for 85%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Clearflex FG 106 A BCA properties include: superior film toughness and strength, potential downgauging, superioroptical properties and outstanding sealing performance. It is recommended for agricultural film, blown stretch film, barrier food packaging, form filland seal packaging, lamination film. Improved toughness, excellent sealability and high throughput are justsome of the benefits which add value to our customers across the supply chain. Sustainability The product Clearflex FG 106 A BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Clearflex FG 106 A BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an hexene copolymer linear low density polyethylene (C6-LLDPE), with antioxidants, suitable for blown film extrusion. The production of Clearflex FG 106 A BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Clearflex FG 106 A BCA will be bio circular attributed for 85%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.