DFDA-1375 RD 是一种线性低密度聚乙烯电缆护套材料，以粒料形式供货。该产品专门应用于可识别电力电缆加工，在厚度为10 mils (0.25 mm)时，其不透明性要高于DFDA-1374 RD。该产品中带有一个有机颜料和填料体系，使其在酸、碱和水中均具有优异的保色性。该产品与LLDPE 护套相容，建议将其作为一种带材与DFDG-6059 BK一同使用。 规格 DFDA-1375 RD 满足以下原材料规格要求： - ASTM D 1248 Type 1, Class B, Category 4, Grades J1 和 J3

绝缘树脂 Dow AXELERON™ GP A-7530 NT 以粒料形式供货，是一种采用陶氏的UNIPOL PE工艺制备的线性低密度聚乙烯(LLDPE) 树脂，它具有优异的电性能，可用于实心电缆的绝缘材料。 规格 Dow AXELERON™ GP A-7530 NT 满足以下规格要求： - ASTM D-1248 Type I Category 4, Grade E4 与 E5。

用于电线和电缆的乙烯共聚物 Dow AXELERON™ GP K-6050 NT 是一种增强型的线性低密度聚乙烯树脂，在适当着色和经过稳定化之后可作为电缆护套材料。这种材料具有更高的韧性、强度，耐热性能高，同时还具有良好的柔软性、优异的耐环境应力开裂性能和优异的加工性能。由于其在机械性能和加工特性之间具有良好的平衡性，使得Dow AXELERON™ GP K-6050 NT 成为电力电缆和电信电缆的非常好的护套材料。 加工建议： Dow AXELERON™ GP K-6050 NT 可使用很多的普通的商用护套挤出机进行挤出加工。一般来说，挤出机料筒温度取决于很多因素，比如挤出机的规格。 一个较好的出发点是：在熔融温度低于250°时，料筒温度设置：140/190/200/200/200/200°C 。 应用领域： Dow AXELERON™ GP K-6050 NT 是一种原色树脂，可与炭黑或者颜料共混并需加入一种合适的紫外线稳定剂以确保其具有足够的耐候性能。需要加入适量的抗氧剂以确保其长期的耐老化性能。 规格： - 在采用业界标准的商用挤出规范时，这种聚合物材料符合以下电线和电缆材料的规格要求： ASTM D 1248, Type I, Class A, Category 3 Grade J3, E4. ISO 1872-PE, KGN - 在于适宜的炭黑和色母料混配，采用业界标准的商用挤出规范时，采用了Dow AXELERON™ GP K-6050 NT 制得的护套可满足以下规格要求： EN 50290-2-24 IEC 60708 IEC 60502 ST3 IEC 60840 ST3 HD 620 S1 Part 1, DMP 12, 14, 17 BT M132 请查询法规以获取完备的细节资料。

DOW ENDURANCE™ DHDA-7708 BK is a thermoplastic semiconductive compound specifically designed for jacketing over medium, high, and extra-high voltage power cables. It combines the excellent physical properties and low moisture vapor transmission normally associated with Dow insulating jacket materials with the conductivity of thermoplastic semiconductive insulation shielding compounds. In medium voltage cable applications, a semiconductive jacket provides cable endurance and prolongs cable life by reducing neutral-to-ground impulse voltage. The semiconductive jacket enables on-reel cable diagnostic analysis in high and extra-high voltage applications. Compared to conventional thermoplastic semiconductive materials, DOW ENDURANCE™ DHDA-7708 BK offers: - Improved environmental stress-crack resistance - Improved low-temperature properties - Improved thermomechanical properties - Reduced adhesion to strippable insulation shields - Improved cut-through and abrasion resistance - Reduced moisture vapor transmission Details are shown in Figures 1 to 4 Specifications Cables jacketed with DOW ENDURANCE™ DHDA-7708 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications: - AEIC: CS8, CS9 - ICEA: S-94-649 Type 1, S-108-720 Type 1 - IEC: 60502, 60840, 62067

- Linear Low Density Polyethylene - Excellent tear strength, outstanding toughness - Good processability at narrow die gaps - Complies with U.S. FDA 21 CFR 177.1520(c) 3.1a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Outstanding tear strength, impact strength and toughness - For high performance cast film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with U.S. FDA-DMF - Complies with U.S. FDA-U.S. USP - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOWLEX™ 2035G Polyethylene Resin is suitable for the production of cast films where low orientation in the film and ease of processing are primary considerations. Applications: - Cast Film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

DOWLEX™ 2036.01G Linear Low Density Polyethylene Resin is suitable for the production of cast films with high stiffness, good tear strength and outstanding toughness. It can be used in skin layers of coextreuded cast films made from DOWLEX resins to provide a surface with good slip properties. Complies with: - EU, N0 10/2011 - FDA 21 CRF 177.1520(c) 3.2a. Consult the regulations for complete details.

- Linear Low Density Polyethylene - Improved thermal stability for high stiffness film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Improved thermal stability for high stiffness film applications - Complies with -- U.S. FDA 21 CFR 177.1520 (c) 3.2a -- EU, No 10/2011 -- U.S. FDA-DMF -- HPFB (Canada), No Objection -- Consult the regulations for complete details

- Diaper back sheet - For high stiffness film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Fast processing on narrow die gaps - For blown film paper product overwrap applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA-DMF Consult the regulations for complete details.

DOWLEX™ 2042EC Polyethylene Resin is an ethylene/octene-1 copolymer suitable for the production of blown film requiring good tear strength and outstanding toughness with good stiffness and temperature resistance. Note: DOWLEX 2042EC Polyethylene Resin should comply with FDA regulation 177.1520, Canadian HPFB No Objection (With Limitations) and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.

- Linear Low Density Polyethylene - Good tear strength, medium stiffness, outstanding toughness - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consult the regulations for complete details.

DOWLEX 2045.01G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery. DOWLEX 2045.01G Polyethylene Resin contains slip and antiblock additives. Applications: - Thin gauge industrial & consumer films - Heavy duty films Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- For high speed, thin film applications - Additional thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - For heavy duty film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - Consult the regulations for complete details.

- Linear Low Density Polyethylene - For heavy duty applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Complies with ISCC PLUS certification for circular plastics - Canadian HPFB No Objection - Consult the regulations for complete details. DOWLEX™ 2045G CIR Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films . Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details DOWLEX™ 2045G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films . Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications - Excellent color and thermal stability - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a - Consult the regulations for complete details. DOWLEX™ 2045G Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films are made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For heavy duty applications Complies with - U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulations for complete details. DOWLEX™ 2045P Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness, tear resistance and color stability. The product also delivers very good processability on conventional LLDPE machinery.

- Linear Low Density Polyethylene - For high performance stretch film applications - Outstanding tear strength, impact strength and toughness Complies with: - U.S. FDA, FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Linear Low Density Polyethylene. - For high performance form-fill-seal packaging applications. - Outstanding tear strength, impact strength and toughness. - Formulated with slip and antiblock additives. - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Consult the regulations for complete details.

- Linear Low Density Polyethylene - Excellent tear strength and medium stiffness - Outstanding toughness and puncture resistance for films used in food contact applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a. - Consult the regulations for complete details.