LDF-722F is a certified prime resin specially designed for INJECTION MOLDING. LDF-722F features excellent combination of processability, flexibility and surface appearance. LDF-722F applications include caps, closures and overcaps. LDF-722F contains high slip and high antiblock. LDF-722F complies with FDA regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles.

LDF-722F is a certified prime resin specially designed for production of high drawdown thin gauged high clarity Blown films. LDF-722F features excellent combination of easy processability at high extrusion rates and very good balance of film mechanical properties. Films display very good color stability and superior heat seal performance. LDF-722F applications include films for garment laundry and dry cleaning, banana tree shroud bags, and produce bags. Maximum recommended film drawdown is 0.5 mils. LDF-722F contains high slip and high antiblock. LDF-722F complies with FDA regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles.

LDF-820A is a certified prime resin specially designed for production of laminates and coating Blown films. LDF-820A features easy processability and very good color stability. Films exhibit good mechanical properties, resistance to pinholling and excellent heat seal performance. Applications include lamination film, extrusion coating, expandable foam and as carrier resin for color com pounding. Maximum recommended drawdown is 0.5 mils. LDF-820A contains no slip and no antiblock.

LDI-2523 is a certified prime grade specially designed for Higher Flow INJECTION MOLDING / COMPOUNDING applications requiring good balance of mechanical and low warpage properties. LDI-2523 features easy processability over a wide range of molding conditions, good clarity, excellent flexibility, and high surface appearance of molded articles. LDI-2523 applications include housewares, lids, closures, overcaps, medical parts, and general purpose molded articles. Recommended processing temperature is 170 to 220°C., with mold at 20 to 40°C..

LDI-2618 is a certified prime grade designed for High-Flow INJECTION MOLDING applications. LDI-2618 features easy processability, good clarity, excellent flexibility and good surface appearance. LDI-2618 applications include housewares, lids, closures and general purpose molded articles. Recommended processing temperature is 170° to 220°C, with mold at 20° to 40°C. LDI-2618 complies with FDA regulation 21CFR 177.1520 (c) 2.1 and most international regulations concerning the use of Polyethylene in contact with food articles.

LDI-3524 is a certified prime grade designed for High-Flow INJECTION MOLDING applications. LDI-3524 features easy processability, excellent flexibility and warpage resistance. LDI-3524 applications include lids, closures and caps. LDI-3524 complies with FDA regulation 21CFR 177.1520 (c) 2.2 (conditions of use B through H) and most international regulations concerning the use of Polyethylene in contact with food articles.

LDI-4023 is a certified prime grade specially designed for High-Flow INJECTION MOLDING applications requiring good balance of mechanical and low warpage properties. LDI-4023 features very good processability over a wide range of molding conditions, good clarity, excellent flexibility, and high surface appearance of molded articles. LDI-4023 applications include housewares, lids, closures, overcaps, medical parts, and general purpose molded articles. Recommended processing temperature is170 to 220°C., with mold at 20 to 40°C.. LDI-4023 complies with FDR regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles.

LDI-5523 is a certified prime grade designed for High-Flow INJECTION MOLDING applications. LDI-5523 features easy processability, excellent flexibility, good clarity and low warpage. Typical applications for LDI-5523 include lids. LDI-5523 complies with FDA regulation 21CFR 177.1520 (c) 2.1.

LDI-918 is a certified prime grade low density polyethylene resin with a medium melt index (MI), especially designed for use in color concentrate and masterbatches, where its flow properties and rheology ensure improved processability and uniform dispersion of additives. LDI-918 can be used in injection molding applications, such as: caps, food packaging containers, closures, housewares product, compound and materbatch resin. LDI-918 could be used to make injection molding products to get outstanding balance of processability and end user performance. The resin does not contain the thermal stabilizer and LDI-918 complies with FDA regulation 21CFR 177.1520(c3).1a / 3.2a, and most international regulations for use in contact with food.

Flame Retardant LDPE, non-halogenated

extrusion grade, V-2 rated LDPE

COSMOTHENE EVA KA-10 is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan. COSMOTHENE EVA KA-10 has good adhesion strength and good flexibility.

COSMOTHENE EVA KA-31 is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan. COSMOTHENE EVA KA-31 is a high strength EVA grade with good adhesioin strength and provides soft feeling for sheet application.

COSMOTHENE EVA KA-40 is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan. COSMOTHENE EVA KA-40 offers good processibility, good color stability, transparency and gel control. COSMOTHENE EVA KA-40 is designed for extrusion/calendering sheet use in solar photovoltaic cell encapsulation.

COSMOTHENE EVA VF024N00 is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan. COSMOTHENE EVA VF024N0O offers good processibllity, good color stability, transparency and gel control. APPLICATIONS: COSMOTHENE EVA VF024N00 is designed for extrusion sheet use in solar photovoltaic cell encapsulation.

COSMOTHENE F108-5 is specially design for excellent shrinkage, toughness and strength. F108-5 is not formulated with slip and antiblocking agent. Shrink film food packaging, heavy duty bag & etc.

COSMOTHENE F210 is not formulated with additives such as slip and antiblock agents. F210 is suitable for foam sheet, bubble pack and film applications.

COSMOTHENE F210-6 has excellent strength, good processibility and transparencey. It is formulated with medium level of slip and antiblocking agent. Shopping bag, transparent bag, sealant film for lamination and many others general purpose bag.

COSMOTHENE F410-1 has excellent transparency, good stiffness and processibility. It is formulated with medium level of slip and antiblocking agent. Transparent thin gauge bag, shopping bag, zipper bag and many others general purpose bag.

COSMOTHENE F410-3 is not formulated with slip and antiblock agents for better cling property. Food wrapping film and diaper film.

COSMOTHENE F410-7 has excellent transparency, good stiffness and processibility. BHT is not used and it is formulated with medium level of slip and antiblocking agent. Transparent thin gauge bag, shopping bag, zipper bag and many others general purpose bag.

COSMOTHENE G215 has excellent strength and stress cracking resistance. APPLICATIONS: Small articles injection molding, blow bottle, bottle cap and lid. G215 complies with U.S. FDA Regulation 21 CFR 177.1520 (C) 2.1, as long as it is used unmodified and processed according to standard manufacturing practices in the industries.

COSMOTHENE G310-S has excellent cracking resistance, processibility and small pellets. APPLICATIONS: Artificial flower and other injection molding usages.

COSMOTHENE G811 has excellent gloss and moldability. Lid, toy, sundry and many others injection molding usages.

COSMOTHENE G812 has excellent gloss and moldability. Artificial flower, sundry and many others injection molding usages.

COSMOTHENE L420 shows good balance between neck-in and processability, good heat seal property, good adhesion (with base film). COSMOTHENE L420 is not formulated with additives. Extrusion coating on polyester film, biaxially oriented PP film, paper, aluminum and PE woven cloth.

COSMOTHENE L712 is low density polyethylene which has good bonding strength with substrates, good heat seal property and excellent processability for thinner coating. L712 is not formulated with additives. APPLICATIONS: Extrusion coating on polyester film, biaxially oriented PP (BOPP) film, paper, aluminium foil and PE woven cloth. L712 complies with U.S. FDA Regulation 21 CFR 177.1520 (C) 2.1, as long as it is used unmodified and processed according to standard manufacturing practices in the industries.

Low Density Polyethylene, FDA Compliant

20 Melt, Prime Low Density Polyethylene, FDA Compliant

2 Melt, Prime Low Density Polyethylene, FDA Compliant

8 Melt, Prime Low Density Polyethylene, FDA Compliant

NUCLEATOR MASTERBATCH HM-237 is an additive concentrate containing a highly efficient Nucleator. Nucleation in LLDPE can improve film properties, clarity, barrier and yield rates. In blow molding for PE, HM-237 can reduce cycle time and achieve better control over shrinkage characteristics. In injection molding applications the nucleator will provide faster cycle times, lower shrinkage and higher barrier properties. Key Features: - Designed to be added to polyethylene film, extrusion, blow molding and injection molding resins. - Improved Clarity in Films, bottles and injection molded articles - Uniform concentration of additives in concentrate form. - Masterbatch pellet form for ease of addition and feeding into extrusion equipment Directions for Use: - HM-237 is added to HDPE, LDPE or LLDPE at 2.5% to achieve improved crystallization for faster cooling, lower warpage especially between different colors. Achieve more uniform crystal sizes as the PE cools for improved gloss and barrier properties along with excellent clarity. - Note: Effectiveness reduced in LDPE with molecular weights resulting in < 2.0 MI or high LCB. FDA Compliance: - The components of this product are compliant with FDA requirements up to 9% LD by weight. Please consult with the FDA regulations for specific application requirements. - This product has a Drug Master File (DMF) listing.