FA6220 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Includes Antioxidant. This grade is developed for the production of thin blown films. CAS-No.: 9002-88-4 Applications FA6220 has been developed especially for applications like: - Shrink film - General packaging film - Pouches - Bubble film and foam Additives FA6220 contains antioxidant.

FA6224 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Contains Antioxidant, Anti-block and Medium Slip additives. This grade is developed for the production of thin blown films. CAS-No.: 9002-88-4 Applications FA6224 has been developed especially for applications like: - Pouches - General packaging film Additives Content Antiblock (Talc) 850 ppm Borealis Method Slip (Erucamide) 500 ppm Borealis Method Antioxidant (Vitamin E) Yes Borealis Method

FA7220 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Includes Antioxidant. This grade is developed for production of blown film or cast film with good optical properties. When cast on a polished chill roll, the grade produces household cling film with excellent optical and cling properties. CAS-No.: 9002-88-4 Applications FA7220 has been developed especially for applications like: - Protective film - Laundry and other textile bags - Very thin and clear packing films Additives FA7220 contains antioxidant.

FA7224 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Contains Antioxidant, Anti-block and Medium Slip additives. This grade is developed for production of blown film or cast film with good optical properties. CAS-No.: 9002-88-4 Applications FA7224 has been developed especially for applications like: - Thin bags with excellent optical and slip properties - Laundry and other textile bags Additives Content Antiblock (Talc) 1100 ppm Borealis Method Slip (Erucamide) 700 ppm Borealis Method Antioxidant Yes Borealis Method

FA7229 is a Low Density Polyethylene for Film Extrusion. Autoclave Technology. Includes Antioxidant and Cling additive. This grade is developed for production of blown cling film. CAS-No.: 9002-88-4 Applications FA7229 has been developed especially for applications like: - Food wrap film - Blending - Lamination films Additives FA7229 contains antioxidant and antifog/cling additives.

FT3200 is a Low Density Polyethylene for Film Extrusion. Tubular Technology. Unmodified. CAS-No.: 9002-88-4 Applications FT3200 is recommended for: - Heavy-duty bags - Construction films - Shrink film - Agricultural films Additives FT3200 contains no additives. Special Features FT3200 is optimised to deliver: - Excellent shrink performance

FT5230 is a Low Density Polyethylene for Film Extrusion. Tubular Technology. Unmodified. This grade is developed for the production of packaging film with good optical properties for medium duty film applications. CAS-No.: 9002-88-4 Applications FT5230 has been developed especially for applications like: - Shrink film - Lamination films - Carrier-bag film - Food packaging - Pouches Additives - FT5230 contains no additives.

FT5236 is a Low Density Polyethylene for Film Extrusion. Tubular Technology. Includes Anti-block and Medium Slip additives.

FT6230 is a tubular, low density, polyethylene grade for the production of packaging film. FT6230 is developed to give films with good optical properties for thin film applications. FT6230 is intended for applications like: - Films for use on automated packaging machinery - Pouches - Fine shrink films - Food packaging films FT6230 contains no additives.

It is a low density polyethylene compound intended for the insulation of radio frequency coaxial cables. LE1120 is designed to give the lowest possible cable attenuation by the selection of electrical clean feedstock and contains no additives. Applications LE1120 is designed to use as physically foamed insulation for: - Radio frequency coaxial cables (50 Ohm) Specifications LE1120 meets the following material classification: - ISO 1872-PE, KGN, 23-D045 - ASTM D 1248 Type I, Class A, Category 3, Grade E1, E2, E3 The following cable material standards are met by LE1120: - EN 50290-2-23 Cables manufactured with LE1120 using sound extrusion practice normally comply with the following cable product standards: - IEC 61196 - EN 50117 Special Features LE1120 consists of specially selected components to offer: - Low attenuation at high frequency - Expansion degree above 80 %

MA8200 is an autoclave polymerised LDPE homopolymer offering good impact strength and flowability. It is intended to be used over a wide range of moulding applications especially injection moulded caps and closures applications. The grade does not contain slip or antistatic agent. CAS-No. 9002-88-4 Applications - Caps and closures Additives MA8200 contains no additives.

Bormed LE6600-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6600-PH is an additive free low density polyethylene which is used to produce soft and flexible packages for pharmaceutical products. The material can be converted via blow moulding, including BFS technology, or IBM into small bottles or ampoules. However, material can as well be used in injection moulding and blown film process. The flexibility of the materials will facilitate the dosing of the medicine when used in ampoules and bottles. Bormed LE6600-PH may be sterilized by steam, ethylene oxide or gamma radiation. CAS-No.9002-88-4

Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH . - Bottles for irrigation solutions - Ampoules for injectable solutions - Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features - No additives

Bormed LE6609-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6609-PH is an additive free low density polyethylene typically used in blow moulding articles . Material is characterised with a balanced inflexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6609PH can be steam sterilised at temperatures above 110 °C. Products made from Bormed LE6609-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6609-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6609-PH . - Bottles for irrigation solutions - Ampoules for injectable solutions - Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features - No additives

Borstar LE8707 is a black linear low density (LLD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology. Borstar LE8707 contains 2.6% well-dispersed carbon black in order to ensure excellent weathering resistance. Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR). Applications Borstar LE8707 is designed for jacketing of energy and communication cables. The abrasion resistance combined with low coefficient of friction makes it ideally suitable for the jacketing of energy and communication cables. Borstar LE8707 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables. Specifications Borstar LE8707 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ASTM D 1248 Type I, Class C, Category 4, Grade E4, E5, J3, W2-4 - ISO 1872-PE, KCHL, 23-D012 The following cable material standards are met by Borstar LE8707: - EN 50290-2-24 - DMP 5, 7-10, 12, 14, 15, 17 Cables manufactured with Borstar LE8707 using sound extrusion practice normally comply with the following cable product standards: - IEC 60708 - IEC 60794 - IEC 60502, Part 2, Type ST3, ST7 - IEC 60840, Type ST3 - IEC 60840, Type ST7 - HD 632 S2, ST3, ST7 - EN 50407 - EN 187105 - HD 603 S1, DMP 5, 7, 8 - HD 620 S2, DMP 9, 10, 12, 14, 15, 17 - UL 1072 Oil resistance I & II Special Features Borstar LE8707 consists of specially selected components to offer: - Superior processability - Excellent environmental stress cracking resistance (ESCR) - Rather low heat deformation - Low coefficient of friction - Low water permeability - Good petroleum-jelly resistance - Outstanding UV resistance - Low shrinkage

BRALEN+ FA 03-01 is a film grade of low density polyethylene with good processability, flexibility, toughness and good tear strength. This grade is additives free. BRALEN+ FA 03-01 is designed for production of heavy duty and shrink films. It is well suited for blow moulding of various containers, bottles, pipes, sheets and profiles extrusion and for injection moulding. Recommended film thickness is 0.07 to 0.22 mm.

BRALEN+ FB 03-02 is a film grade of low density polyethylene with good processability, flexibility, toughness and good tear strength. This grade is additives free. BRALEN+ FB 03-02 is designed for production of heavy duty and shrink films. It is well suited for blow moulding of various containers, bottles, pipes, sheets and profiles extrusion and for injection moulding. Recommended film thickness is 0.07 to 0.22 mm.

BRALEN+ FB 08-12 is a film grade of low density polyethylene. This grade is additives free. BRALEN+ FB 08-12 is suitable for production of non-slip shrink films for collation packaging, technical films, bags and pouches. This grade can be used also for blow moulding applications. Recommended film thickness is 0.025 to 0.100 mm.

BRALEN+ FB 08-50 is a film grade of low density polyethylene containing slip agent erucamide and antiblocking agent. BRALEN+ FB 08-50 is designed for production of shrink and technical films. This grade can be used also for production of carrier bags and pouches. Recommended film thickness is 0.025 to 0.080 mm.

BRALEN+ FB 2-16 is a film grade of low density polyethylene. This grade is additives free. BRALEN+ FB 2-16 is intended for production of bags and pouches, shrink films, packaging and technical films as well as for production of cast and bubble films. This grade can be used also for production of foamed sheets and profiles. Recommended film thickness is 0.02 to 0.10 mm.

BRALEN+ FB 2-51 is a film grade of low density polyethylene containing slip agent erucamide and antiblocking agent. BRALEN+ FB 2-51 is designed for production of thin slip films for automatic packaging. It is well suited also for production of bags, pouches, shrink films, as well as cast films. Recommended film thickness for this grade is 0.02 to 0.06 mm.

BRALEN+ FB 4-31 is a film grade of low density polyethylene with good processability and optical properties. This grade is additives free. BRALEN+ FB 4-31 is suitable for production of non-slip blown films, surface protection films, cast films. This grade can be used also for extrusion coating and injection moulding applications. Recommended film thickness is 0.015 to 0.040 mm. This grade can be used also for extrusion coating and injection moulding applications.

BRALEN+ FB 4-52 is a film grade of low density polyethylene with low friction, good processability and optical properties. This grade contains erucamide slip agent and antiblocking agent. BRALEN+ FB 4-52 is intended for production of thin slip films for automatic packaging and cast films. Recommended film thickness is 0.015 to 0.040 mm.

BRALEN+ FC 03-03 is a film grade of low density polyethylene with increased density (MD LDPE). High rigidity, good optical properties and chemical resistance are typical for this grade. It is additives free. BRALEN+ FC 03-03 can be used for bags & pouches, blown films, shrink films and surface protection films, blow moulding products as well as injection moulding especially closures and seals. Recommended film thickness is 0.06 to 0.22 mm.

BRALEN RB 03-23 is a general purpose grade of low density polyethylene. It is characterized by high environmental stress cracking resistance and very good mechanical properties. This grade is additives free. BRALEN RB 03-23 is designed for production of heavy duty and shrink films. It is well suited for blow moulding of various containers, bottles, pipes, sheets and profiles extrusion and for injection moulding. Recommended film thickness is 0.07 to 0.25 mm.

BC818 is a low density polyethylene indicated for several applications. In the coating process it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. In the injection molding process it gives excellent flexibility. Application: Masterbatches, Caps, Bungs, Extrusion coating, Flexible injection molded articles Processes: Injection Molding, Extrusion

BC818 is a low density polyethylene indicated for several applications. In the coating process it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. In the injection molding process it gives excellent flexibility. Applications: Masterbatches, Caps, Bungs, Extrusion coating, Flexible injection molded articles Processes: Injection Molding, Extrusion

BF0323/12 is a high molecular weight LDPE produced under high pressure technology. Films obtained with this product show outstanding optical properties, excellent mechanical properties, and good shrinkage. Additive: Slip, Antiblock. Applications: Technical film for liquid packaging

BF2021 is a grade that shows excellent processability in cast films. Applications: Foamed PE Blankets, General use films Process: Extrusion Blow Molding

BF0323HC is a high molecular weight grade produced under high pressure. Films obtained with this product show excellent mechanical and optical properties. Process: Extrusion Blow Molding

DLR 001A is a low density polyethylene is obtained from post-consumer shink, having a concentration of 55% recycled material. This product has a transparent color. Applications: Flexible packaging., Stretch Films Processes: Blown Film Extrusion, General extrusion.

EB853/72 is a grade produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. Additive: Slip, Antiblock. Applications: Automatic packaging, High transparency films

EB853 low density polyethylene produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Applications: Blends with LLDPE, Blends with HDPE Processes: Cast Film Extrusion.

EB853 low density polyethylene produced under high pressure in a Tubular reactor. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Applications: Blends with LLDPE, Blends with HDPE. Process: Cast Film Extrusion

EF2126S3 is a Low Density Polyethylene produced under high pressure conditions in an autoclave reactor. It offers excellent processability and optical properties. Additives: This resin contains slip and antiblock additives Application: General use films, Technical films for automatic packaging, Blends with LLDPE Process: Blown Film Extrusion

EF2222 is a low-density polyethylene (LDPE), with excellent processability and low gel content. Those features allow production of thin and highly uniform films. Application: Technical Films for Lamination, Plain and embossed films for the production of diapers and wipes, Foamable compounds Process: Extrusion Blow Molding, Cast film extrusion

F2022/0 is a grade that shows excellent processability in cast films. Applications: Diapers, Hygienic absorbent, Foamed PE Blankets, Foamed products, General use films Processes: Extrusion Blow Molding, Cast Film Extrusion.

Good processability and flexibility, high melt flow rate and mechanical resistance. No additives added. Applications: Blends with EVA for expanded plate, Caps, Flexible injection molded articles Processes: Injection Molding

LD4003 is a Low Density Polyethylene produced under high pressure conditions in a tubular reactor. It offers good processability and excellent mechanical and optical properties. Additives: Slip and Antiblock Application: Technical films for automatic packaging, General use films, Blends with LLDPE Process: Blown film extrusion.

LD5000A is a low density polyethylene (LDPE), with good mechanical properties and high flexibility. Contain no additives. Applications: Blends with HDPE, Blow molding small volumes, Pharmaceutical products packaging (not indicated for parenteral solution), Squeeze packaging Process: Extrusion Blow Molding, Injection blow molding