DOW LDPE™ 132G 低密度聚乙烯树脂可以很容易地采用常用的吹塑薄膜技术进行挤出加工，所采用的熔体温度范围在170 至 230°C。在制备得当时，这种树脂将加工性能、挺度和物理性能很好地结合在一起。这种产品不含滑爽剂，也不含开口剂。 备注： 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料 应用领域： - 重包装工业用薄膜 - 收缩膜

- A barefoot resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used in shrink film, shipping sacks, construction film and other gauge film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Consult the regulations for complete details.

- A medium anti-block resin for heavy duty film applications - Optimum gauge range: 2.0-6.0 mil - Used for thick gauge film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2. - Canadian HPFB No Objections (With Limitations) - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE™ 150E 低密度聚乙烯树脂可以采用普通的吹塑薄膜工艺进行挤出加工，熔体温度在170 和 230°C之间。制备得当的DOW LDPE 150E 低密度聚乙烯树脂将加工性能、挺度和物理性能较好地综合在一起。 备注： DOW LDPE 150E 低密度聚乙烯应该符合以下法规要求： EU, No 10/2011 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 美国食品和药物管理局法规-药物主文件 (DMF) 请查询法规以获取完备的细节资料 应用领域： - 重包装工业用薄膜

DOW LDPE 303E Low Density Polyethylene Resin contains no slip or antiblock additives. DOW LDPE 303E Low Density Polyethylene Resin can readily be extruded using the blown film techniques utilising melt temperatures between 160 and 200 ° C. Main Characteristics: - Good draw down (30µm) - Good mechanical properties. - Good optics Applications: - Industrial and semiindustrial shrink films. - Heavy duty bags. - Construction films Complies with: - Canadian HPFB No Objection - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulation for complete details.

DOW LDPE 305E is a fractional melt index low density polyethylene resin designed for blown film extrusion where good optical properties and an excellent balance of physical properties is required. Main Characteristics: - High optical properties - Excellent tensile and tear strength - Excellent shrink properties Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 310E R is a fractional melt index low density polyethylene resin. DOW LDPE 310E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 310E REN is a fractional melt index low density polyethylene resin. DOW LDPE 310E REN blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 310E is a fractional melt index low density polyethylene resin. DOW LDPE 310E has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: - lamination film, shrink film, and stretch film Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details. Slip Additive: 0 ppm Antiblock Additive: 0 ppm

DOW LDPE 312E R is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. DOW LDPE 312E R has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: Health & hygiene films, Food packaging, Collation shrink, Agricultural films, Shopping bags, Garbage bags, Lamination films Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 312E REN is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. DOW LDPE 312E REN has been specially designed for superior processability on blown film lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. Applications: Health & hygiene films, Food packaging, Collation shrink, Agricultural films, Shopping bags, Garbage bags, Lamination films Main Characteristics: - Excellent processability and draw down - Good physical properties in blends with LLDPE - Can be readily extruded using conventional blown film techniques at melt temperatures between 160 and 195°C Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 312E 是一种低熔融指数、低密度聚乙烯树脂，含有滑爽剂和开口剂。DOW LDPE 312E具有优异的加工性能，是专为吹塑薄膜加工生产线而研制的，该产品的应用可显著地提高产能。 此外，该树脂还具有优异的牵伸性能。该树脂可单独使用或者与LLDPE树脂共混使用。 应用领域： 健康和卫生用薄膜，食品包装，冷食小吃收缩膜，农用薄膜，购物袋，垃圾袋，复合薄膜 主要特性： - 优异的加工性能和牵伸性能 - 与LLDPE的共混物具有良好的物理性能 - 可以很容易地采用常规的吹塑薄膜技术进行挤出加工，熔体温度范围在160 至 195°C DOW LDPE 312E 应该符合以下法规的要求： - 美国食品和药物管理局法规 21 CFR 177.1520 (c) 2.2 - EU, No 10/2011 - Canadian HPFB No Objection - U.S. FDA-DMF 请查询法规以获取完备的细节资料。 滑爽剂含量：385 ppm 开口剂含量：900 ppm

DOW LDPE 320E 是一种低熔融指数、低密度聚乙烯树脂。DOW LDPE 320E是专为需要高透明度和高光泽度而研制的。其提升的光学性能亦可在LLDPE共混物中见到，在LDPE含量高的结构中就更加明显。由于其牵伸性能优异，使其可以用于某些较薄结构部件的加工。 应用领域： 食品包装、展示性包装、消费品包装用的复合薄膜 主要特性： - 优异的加工性能和牵伸性能 - 用于需要优异的光学性能的应用领域，可单独使用，也可与LLDPE共混使用 DOW LDPE 320E 应该符合以下法规的要求： - 美国食品和药物管理局法规 21 CFR 177.1520 (c) 2.2 - EU, No 10/2011 请查询法规以获取完备的细节资料。 滑爽剂含量：0 ppm 开口剂含量：0 ppm

DOW LDPE 330E 是一种低熔融指数、低密度的聚乙烯树脂。DOW LDPE 330E是专为保护性薄膜而研制的，这种薄膜需要较高的光学性能和非常低的晶点 主要特性： - 光学性能高 - 晶点水平很低 - 优异的拉伸强度和抗撕裂强度 - 优异的收缩性能 - 符合以下法规： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料。 滑爽剂含量：0 ppm 开口剂含量：0 ppm

DOW LDPE 352E R Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags - Soft goods packaging - Textile packaging - Good optical general purpose bags - Hygiene films - Food packaging films Complies with: - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 352E REN Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags - Soft goods packaging - Textile packaging - Good optical general purpose bags - Hygiene films - Food packaging films Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 352E Low Density Polyethylene Resin is a high clarity resin designed for clarity over wrap applications. This resin does contain erucamide slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 160 and 175 °C. This resin when properly fabricated exhibits: - Excellent processability and draw drown. - Outstanding toughness and impact properties. - Superior optical properties. - Excellent tensile and tear strength. Applications: - Light-produce bags. - Soft goods packaging. - Textile packaging. - Good optical general purpose bags. - Hygiene films. - Food packaging films. Complies with: - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details.

Dow Polyethylene LDPE 4010 is a general purpose Extrusion Coating Resin. It complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - European Commission Regulation (EU) No 10/2011. Consult regulations for complete details.

- A high melt index resin for thin coating applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objection ( With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. Polyethylene 4012 is used for a variety of applications such as condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution.

- A high melt index resin for high speed thin coating applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. Polyethylene 4016 can be used for a variety of applications such as condiment packaging, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging.

DOW LDPE 410E 低密度聚乙烯树脂是一种高透明度树脂，用于复合薄膜和高透明度外包装膜加工。这种树脂不含滑爽剂和开口剂，可采用普通的吹塑薄膜工艺进行挤出加工，加工熔融温度在170至195°C之间，其流延薄膜的熔体温度在180 至240°C之间。制备得当时，这种树脂具有优异的加工性能和牵伸性能，韧性和抗冲击性能优异，光学性能优异以及拉伸强度和抗撕裂强度优异的特点。 应用领域： - 复合薄膜 - 食品包装薄膜 - 卫生用薄膜 - 流延薄膜 - 气泡膜 - 发泡PE - 挤出涂覆 Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE 410F Low Density Polyethylene Resin is a high clarity resin designed for lamination film and clarity over wrap applications. This resin does not contain slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 195°C; and cast film using temperatures between 180 and 220°C. This resin when properly fabricated shows: excellent processability and draw down, outstanding toughness and impact properties, superior optical properties, excellent tensile and tear strength. Main Characteristics: - DOW LDPE 410F Low Density Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.

DOW LDPE™ 421E 低密度聚乙烯树脂可采用普通的吹塑薄膜工艺进行挤出加工，熔体温度在160 至195°C之间。制备得当时，与标准树脂相比，这种树脂即便具有更高的密度（挺度高）下也具有优异的机械性能， 同时还保持着非常高的透明度和光泽度。这种树脂具有较好的牵伸性能和加工性能。这种产品不含滑爽剂或者开口剂。 法规要求： DOW LDPE 421E 低密度聚乙烯树脂应该符合以下法规要求： 美国食品和药物管理局法规 21 CFR 177.1520(c)2.2 EU, No 10/2011 请查询法规以获取完备的细节资料。 应用领域： - 透明度高的复合薄膜 - 软质物品的性包装材料，比如纸巾、卫生纸、妇女卫生用品 - 透明度高的纸巾包装膜 - 生鲜食品袋 - 食品包装薄膜

DOW LDPE 432E is a high clarity resin designed for lamination film and clarity overwrap applications. This resin contains slip and antiblock additives. When properly fabricated, this product displays excellent processability and draw down, and a very good balance of film impact resistance, tensile strength and tear resistance. Main Applications: - Lamination films - Food packaging films Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 Consult the regulations for complete details.

DOW LDPE 450E R Low Density Polyethylene Resin has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, DOW LDPE 450E R displays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, DOW LDPE 450E R gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2. - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE 450E REN Low Density Polyethylene Resin has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, DOW LDPE 450E REN displays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, DOW LDPE 450E REN gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2. - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE 450 E 低密度聚乙烯树脂在熔体强度和拉延性之间具有最佳平衡，在流延薄膜、发泡材料、吹塑薄膜和气泡薄膜的挤出加工中具有优异的性能表现。当制备得当时，DOW LDPE 450 E 具有以下性能：优异的加工性能；缩颈小（流延薄膜）；韧性和抗冲击性能很好；而且抗撕裂强度好。在发泡挤出成型时，DOW LDPE 450 E在泡孔生长和稳定性之间具有极佳的平衡，可使极低密度的产品在生产过程中不会产生空洞。 主要特性： - 流延薄膜 - 发泡材料 - 气泡膜 - 通用型吹塑薄膜 - EU, No 10/2011。 - 符合美国食品和药物管理局法规 21 CFR 177.1520(c)2.2的要求。请查询法规以获取完备的细节资料。 - Canadian HPFB No Objection 滑爽剂含量：无 开口剂含量：无

Dow LDPE 5004I is used for fresh milk cartons, liquid/juice containers, dry foods packaging, snack foods packaging, moist foods packaging, and medical packaging. Dow LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. - A low melt index coating resin for demanding packaging applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.2 - U.S. FDA -DMF - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association Consult the regulations for complete details.

Polyethylene 5005 Low Density is used for fresh milk cartons, liquid/juice containers, dry foods packaging, snack foods packaging, moist foods packaging, and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. Main Characteristics: - A low melt index coating resin for demanding packaging applications Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details.

- A resin for clarity and bakery film applications - Optimum gauge range: 1.0 - 3.0 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 - Complies with U.S. FDA - DMF - Complies with EU, No 10/2011 - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details.

- A slip and Antiblock additive resin for liners, industrial and clarity - Optimum gauge range: 1.0-3.0 mil - Complies with U.S. FDA 21 CFR 177.1520(c)2.2. - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 505I Resin is a barefoot grade for general purpose blown film applications. Main Characteristics: - Blown film extrusion - Pellet form Complies with: - U.S. FDA, 21 CFR 177.1520(c)2.1 - Europe EU No. 10/2011 - Consult the regulations for complete details.