Alathon 8005M-3 is a high molecular weight, high density polyethylene copolymer with broad, bimodal molecular weight distribution. Typical applications are non-pressure-rated pipes. Alathon 8005M-3 meets the following standard: - ASTM D3350 Cell Classifications: PE445540A

Alathon 9301 is a high density polyethylene resin selected by customers for sheet extrusion and thermoforming. Alathon 9301 exhibits very low sag and high stiffness.

Alathon 9305TC is a high molecular weight high density copolymer with a broad bimodal molecular weight distribution. This resin exhibits high density, stiffness and good processability. Typical applications for wire and cable include cable in conduit. Alathon 9305TC meets the requirements of the following: ASTM D 1248, Type III, Category 5, Class A, Grade E10; Federal LP390C, Type II, Class H, Category 5, Grade 5.

Alathon H4262 is a high-flow resin that exhibits very good cold temperature impact performance, optimum processing and thermal stability, with good color and organoleptic properties. Typical customer applications include rigid food packaging such as four, five and six-quart ice cream containers produced at high speeds in fast-cycling, multi-cavity stack molds.

ALATHON H 4745 is a multi-purpose, high-flow resin featuring enhanced cold temperature impact performance, enhanced processability and thermal stability for fast cycling and exhibits good color and organoleptic properties. Typical applications are cultured dairy containers, margarine containers, butter tubs and promotional drink cups. Freezer applications include ice cream, sherbet and other frozen dessert containers.

Alathon H4250 is a high-flow "freezer" grade resin that exhibits enhanced cold temperature impact performance, enhanced processing and thermal stability, with good color and organoleptic properties. Typical applications are rigid food containers such as four, five and six-quart ice cream containers that are produced at high speeds in fast cycling multi-cavity stack molds.

Alathon H4620 is a high density polyethylene resin selected by customers for use in extrusion applications. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant LyondellBasell Technical and Business contacts first.

Alathon H4837 is a high-flow "freezer" grade resin that exhibits enhanced cold temperature impact performance, enhanced processing, and thermal stability with good color and organoleptic properties. Typical applications are rigid food containers such as 4-, 5- and 6- quart ice cream containers that are produced in fast cycling multi-cavity stack molds.

Alathon H5057 is a multi-purpose high-flow resin that exhibits enhanced low temperature impact performance, enhanced processing and thermal stability for fast cycling in multi-cavity stack molds, good color and organoleptic properties. Typical applications are rigid food containers such as cultured dairy product containers, margarine tubs, butter tubs, small frozen food containers and promotional drink cups.

Alathon H5112 is a medium-molecular-weight-distribution resin with balanced impact/ESCR and high flow characteristics. Typical applications include housewares, food containers, pail handles and toys.

Alathon H5220 provides easy processing characteristics and exhibits excellent toughness properties and color as well as low odor and good processing stability. Typical applications include housewares, containers, caps and closures.

Alathon H5234 is a high flow injection molding grade of resin selected by customers for fast cycle and thin wall molding. It provides good cold temperature impact resistance. Typical applications include frozen food, ice cream, and deli/condiment containers.

Alathon H5520 provides good processing characteristics and exhibits excellent toughness and color as well as low odor and good molded-part stability. Typical applications include housewares, caps, closures and various food containers.

Alathon H5618 provides easy processing characteristics and exhibits excellent toughness properties and color as well as low odor and good processing stability. Typical applications include housewares, containers, caps and closures.

Alathon H6012 is medium molecular weight high density polyethylene homoopolymer selected by customers for use in cast film applications. Typical applications for this resin include extrusion coating, blends with LDPE and laminations.

Alathon H6017 provides good processing characteristics and exhibits excellent toughness and color as well as low odor and good molded-part stability. Typical applications include housewares, caps, closures and various food containers.

Alathon H6018 is a medium molecular weight high density homopolymer. Typical applications include cast film, extrusion coating and dry food overwraps.

Alathon H6030 is a homopolymer that provides enhanced processability, excellent stiffness and short molding cycles. Typical applications include thin wall and deep-draw.

ALATHON L 3810X03 is an experimental medium density polyethylene copolymer with a broad and bimodal molecular weight distribution. Typical applications include merchandise bags, multi-wall bag film, heavy-duty shipping sacks and roll stock. L 3810X03 is also an excellent blend component for processors who wish to improve the tensile properties and processability of LLDPE film resins or improve the heat seal of HDPE films. This resin can be used to produce mono- and multi-layer films requiring toughness as well as an improved feel and appearance. L 3810X03 also provides processors without grooved feed extruders an opportunity to experience the advantages of higher molecular weight resins.

Alathon L4434 is a medium molecular weight high density copolymer for use in blown film applications. Typical applications include blown film over pouches.

Alathon L4550 is a medium molecular weight high density copolymer with a narrow molecular weight distribution. L4550 inherently has very low gels and is used for monofilament, slit tape and high speed orientation processes. Typical applications include specialty films, packaging of agriculture products, protective netting for the agriculture and building industry, and netting for food applications.

Alathon L4903 is a high molecular weight high density copolymer with broad bimodal molecular weight distribution. This resin exhibits excellent machine direction tear in an HMW-HD resin as well as low gel levels. Typical applications include trash can liners and products requiring incorporation of PCR.

Alathon L4904 is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L4904 is selected by customers for pressure pipe applications including gas distribution, industrial piping, mining, oil & gas gathering, municipal water service lines and sewers. Customers typically use L4904 in applications requiring high resistance to pipe failure by rapid crack propagation and slow crack growth mechanisms. When L4904 is combined with a LyondellBasell approved color or black masterbatch at the correct use level, this compound may meet the following standards or requirements (see Technical Data Sheet for limitations and more information): - ASTM D2513-09a for Polyethylene (PE) Gas Pressure Pipe, Tubing and Fittings - ASTM D3350 Cell Classifications: PE445574C, PE445574E, PE445576C, PE445576E - CSA B137.1 for Pipe, Tubing, and Fittings for Cold-Water Pressure Services - NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings - NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems - Plastics Pipe Institute (PPI) PE 4710 and PE100 per PPI TR-3

Alathon L4907 is a high molecular weight high density copolymer with broad bimodal molecular weight distribution. This resin exhibits high density and stiffness and is selected by customers for use in grooved feed and smooth bore equipment. Typical applications include merchandise bags, grocery sacks, roll stock and produce bags.

Alathon L4930TC is a bimodal high density polyethylene copolymer natural resin used by customers for telecommunications conduits. L4930TC offers an excellent balance of stiffness, toughness and ease of processing. Conduits made with this resin are used with fiber optic cable, electrical cable and telecommunications cable. L4930TC meets the material requirements for polyethylene conduit as per ASTM F2160 and also meets the requirements of ASTM D3350 cell classification 435540A.

Alathon L5005 is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. L5005 is selected by customers for use in merchandise bags, grocery sacks, trash can liners, produce bags and roll stock.

Alathon L5005V is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. L5005V is selected by customers for use in merchandise bags, grocery sacks, trash can liners, produce bags and roll stock. Materials of animal origin are not used as plasticizers, additives or raw materials in L5005V.

Alathon L5008 is a bimodal, high molecular weight, high density polyethylene resin with excellent processing characteristics. L5008 is selected by customers for demanding pressure pipe applications. When combined with an approved color or black masterbatch at the correct use level, L5008 may meet the following standards or requirements (see Technical Data Sheet for limitations and more information): - ASTM D3350 Cell Classifications: PE445564C, PE445564E, PE445565C, PE445565E - NSF Standard 14 and Standard 61 for Potable Water Pipe and Fittings - NSF Standard 358-1 for PE Pipe and Fittings for "Geothermal" Heat Pump Systems - PE80 per ISO 9080 & ISO 12162 - Plastics Pipe Institute (PPI) PE 3408 and PE4608 per PPI TR-3