- Nylene 4114-33 HSL is a 33% glass fiber reinforced, impact modified, heat-stabilized nylon 6,6. - Nylene 4114-33 HSL is useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments.

Nylene 4120 HS is an impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength. Free of silicones, it possesses very low wear properties.

Nylene 4120 is an impact-modified nylon 6/6 molding resin with high impact strength. While free of silicones, it possesses very low wear properties.

Nylene 4121 HS is an impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties.

Nylene 4214-14 BK is a 14% glass fiber-reinforced, impact-modified nylon 6 with excellent molding characteristics and very good physical properties.

Impact-modified with excellent molding characteristics and very good physical properties

- Glass fiber reinforced, impact modified, heat stabilized nylon 6 - Suitable for applications which require this unique blend of properties - Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions

- Glass fiber reinforced, impact modified, heat-stabilized nylon 6 - Useful in applications which require the stiffness of 33% glass fiber reinforcement, but also benefit from improved toughness, especially in dry or cold environments

Nylene 4214-40 HS is a 40% glass fiber-reinforced, heat-stabilized and impactmodified nylon 6 with excellent molding characteristics and very good physical properties.

- Dried to less than 0.20% moisture and packaged in foil-lined gaylords or bags to eliminate the need for pre-drying - Heat stabilized - Specially formulated nylon for the ROTOMOLDING process to reduce cost vs. using 100% powder. - For rotomolding, this product must be used in conjunction with Nylene® 494P BLK powder to achieve good part quality. - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures - Custom colors on demand - Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. - Higher impact at room and elevated temperatures - Meets the strict CARB and EPA fuel permeation regulations - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive

- Specially formulated, heat stabilized, nylon powder for the ROTOMOLDING process - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures - Custom colors on demand - Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. - Higher impact at room and elevated temperatures - Meets the strict CARB and EPA fuel permeation regulations - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive

- Specially formulated nylon powder for the ROTOMOLDING process. - For uses where HIGH IMPACT properties are required. - Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. - Higher heat resistance and melting point. - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures. - Excellent low temperature impact properties (Special impact modified products). - Higher impact at room and elevated temperatures. - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive. - Meets the strict CARB and EPA fuel permeation regulations.

- 10 year UV stabilization package added for outdoor exposure protection. - Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. - For uses where HIGH IMPACT properties are required. - Specially formulated nylon powder for the ROTOMOLDING process. - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures. - UV resistance package increases end-use product life, protects against premature color fading, and retains appearance under weathering conditions for longer periods. - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive. - Meets the strict CARB and EPA fuel permeation regulations. - Higher impact at room and elevated temperatures. - Higher heat resistance and melting point. - Excellent low temperature impact properties (Special impact modified products).

- Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying. - For uses where HIGH IMPACT properties are required. - Specially formulated nylon powder for the ROTOMOLDING process. - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures - Excellent low temperature impact properties (Special impact modified products) - Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. - Higher impact at room and elevated temperatures - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive

- Nylene powders for rotational molding are heat stabilized nylon 6 materials specially formulated for the rotational molding process. - Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying - Higher heat resistance and melting point. Not as likely to melt or lose shape if left in the sun. - Chemical resistance to aromatic solvents, etc. especially at elevated temperatures - Higher impact at room and elevated temperatures - Permits a single step process and a single layer material fuel tank. This will reduce the chances of failure and scrap, which makes it extremely cost competitive

- Nylene 5135 HS is a heat stabilized, 5% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. - Suitable for applications where strength and stiffness are required. - Exhibits an improved impact resistance and flexibility over unmodified nylons

Nylene 5105 HS is a 5% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Nylene 5110 HS is a 10% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Heat stabilized, Glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness

Heat stabilized, Glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness

Nylene 5113 is a 13% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Nylene 5115 HS is a 15% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

- Nylene 5120 HB Cool Grey is a 20% glass fiber-reinforced nylon 6/6 featuring flame retardant, high tensile strength and stiffness. - This product is recognized by Underwriters Laboratories.

Nylene 5120 HS is a 20% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Nylene 5125 HS is a 25% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

- Nylene 5130 HR BK is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. - Product is specially formulated to improve resistance to glycol, such as automotive engine cooling fluid. - Excellent thermal and mechanical properties to increase the lifetime of parts in constant contact with under the hood chemicals.

- Nylene 5130 HR NAT is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. - Nylene 5130 HR NAT is specially stabilized to improve its resistance automotive cooling liquids. - Excellent thermal and mechanical properties to increase the lifetime of parts that are in constant contact with automotive chemicals.

Nylene 5130 HS is a 30% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

- Nylene 5130 MS is a low wear 30% glass fiber reinforced nylon 6,6 using molybdenum disulphide as a lubricant. - This material provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. - 5130 MS is suitable for applications where wear may be an issue.

- Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using 15% PTFE as a lubricant. - This material provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. - 5130 PT15 is suitable for applications where high strength with maximum wear resistance is required.

Nylene 5133 HRL is 33% glass fiber-reinforced nylon 6/6 with improved hydrolysis resistance, featuring high tensile strength and stiffness.

- 5133 HS OR is a 33% glass fiber reinforced nylon 6/6 featuring high tensile strength and stiffness. - 5133 HS OR uses a proprietary copper-free heat stabilizer package to be considered “electronics compliant”. The special stabilizer package is to minimize the potential of corrosion of thin wire windings that occasionally occur with traditional heat stabilizers.

- Nylene 5133 HS is a heat stabilized, 33% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness. - Suitable for applications where strength and stiffness are required. - Exhibits an improved impact resistance and flexibility over unmodified nylons

Nylene 5133 is a glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Nylamid 5133-02 HS is a 33% glass fiber-reinforced nylon 6/6 molding resin offering the good strength properties expected from glass filled materials.

Nylamid 5133-04 BK is an economical, 33% glass fiber-reinforced nylon 6/6 used for injection molding.

Nylamid 5133-04 HS is an economical, 33% glass fiber-reinforced nylon 6/6 used for injection molding.

Nylene 5135 HS is a 35% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

Nylene 5140 HS is a 40% glass fiber-reinforced nylon 6/6 featuring high tensile strength and stiffness.

- Low wear 43% glass fiber reinforced nylon 6,6. - Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material, - Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue.