- 40% glass fiber and mineral reinforced, heat stabilized nylon 6/6 injection molding resin - High strength and stiffness, and very good dimensional stability - Suitable for a wide variety of applications that require both high strength performance and excellent dimensional stability

Nylene 7232 HS MS WPP848 BK is a black, heat-stabilized, lubricated (molybdenum disulfide), 32% glass fiber-reinforced nylon 6 with excellent molding characteristics and verygood physical properties.

Nylene 7232 HS WPP848 BK is a heat-stabilized, glass fiber-reinforced nylon 6 with excellent molding characteristics and very good physical properties.

- Nylon 6 heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding - Stiffness is near that of unmodified nylon 6 - Barrel temperatures should be in the 450°F - 500°F range. - In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning

- Glass and ceramic fiber reinforced nylon 6 injection molding material. - Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products. - Suitable for such uses as valve bodies, pump housings and other applications which require this unique set of characteristics.

- Cylinder temperatures should be in the 435 - 525°F range. - Designed for excellent cold temperature impact. - High impact modified nylon 6 suitable for both molding and extrusion. - Outstanding high strength and high cold temperature impact. - Parts molded from 743 have excellent impact strength right out of the mold without post conditioning.

- Cylinder temperatures should be in the 435 - 525°F range. - Designed for excellent cold temperature impact. - High impact modified nylon 6 suitable for both molding and extrusion. - Parts molded from 743 have excellent impact strength right out of the mold without post conditioning. - Outstanding high strength and high cold temperature impact.

- Nylene 764B is a heat stabilized, high impact modified nylon suitable for both blow-molding and extrusion. - In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 764B have excellent impact strength right out of the mold without post conditioning. - Outstanding features of Nylene 764B include high strength and high cold temperature impact. - Cylinder temperatures should be in the 435 - 525°F (224 - 274 °C) range. - Excellent melt strength to support large parisons

- Nylon 6/12 molding resin with excellent flexibility and lower moisture absorption

- Nylon 6 based copolymer suitable for both blown and cast film coextrusion - Lower melting point and is less crystalline than nylon 6 - Excellent toughness, chemical resistance, transparency, and low oxygen permeability - Films made using Nylene 826 exhibit superior deep draw characteristics - Because Nylene 826 is polymerized using a continuous process, it has good lot-to-lot consistency.

- 33% glass fiber reinforced nylon 6/10 injection molding grade. - Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6,10. - Suitable for applications where moisture pickup may be a concern.

- 443% glass fiber reinforced nylon 6/10 injection molding grade. - Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10. - Suitable for applications where moisture pickup may be a concern.

- General purpose unreinforced nylon 6,10 injection molding grade. - Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10. - Suitable for applications where moisture pickup may be a concern.

Nylene 9533 HS is a 33% glass fiber-reinforced nylon 6/12 molding resin with high modulus and good impact properties.

Nylene 9533 is a 33% glass fiber-reinforced nylon 6/12 molding resin with high modulus and good impact properties.

- Good chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness - Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements

- 43% glass fiber reinforced PA 6,6/6 injection molding grade - High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6. - UV for UV protection and UW for Weatherability.

Compounding, General Grade, mid RV, unlubricated.

Spinning Grade Polymer-Medium Dye

Spinning Grade Polymer-Deep Dye (high amine end group)

- Spinning Grade Polymer-Medium Dye - 50% post industrial recycled content

- Nylene BX3RF is a medium viscosity, heat stabilized, nylon 6 wire jacketing resin qualified for QMTM2 plenum applications. - Offering excellent performance through the range of THHN, THWN, and TFFN constructions. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene BX3WQ662 is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. - This product possesses higher extractables for a balance of performance properties. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene® BX3WQ662X is a medium viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. - This product possesses higher extractables for a balance of performance properties. - Shields PVC from impact which causes cracking and breaking and general deterioration of the product. - Improves the temperature rating of the wire, has good cut through resistance, and high resistance to abrasion. - Dried to less than 0.15% moisture, with packaging options of 1,800 lb. gaylord boxes or 55 lb. foil-lined, vacuum sealed bags.

- Nylene CX3395 is a high RV nylon 6,69 copolymer suitable for both blown and cast film co-extrusion. - CX3395 has a lower melt point and is less crystalline than standard nylon 6 resins. In addition to it's excellent film application properties, CX3395 exhibits superior deep-drawing characteristics.

- Nylene® CX3492 is a high viscosity, plasticized, nylon 6/69. - Nylene® CX3492 was designed for extrusion applications especially monofilament.

Nylene NX 1170 HS is a high viscosity, heat stabilized grade formulated to give low wear properties through use of molybdenum disulfide at the 5 percent level.

NYLENE® NX 1170 is a PA 6 copolymer, high viscosity grade formulated to give low wear properties through use of molybdenum disulfide at a high loading level.

NX1440 SP CB is a nucleated medium viscosity nylon 6 molding resin useful for applications requiring greater stiffness and a higher heat distortion temperature.

- Nylene NX1440 is a nucleated medium viscosity, fast cycle molding resin. - Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from other nylon - Parts molded have better dimensional stability at moisture equilibrium than parts molded from conventional nylon. - Crystallization initiators provide fast molding cycles through rapid melt set-up. - Most useful for applications requiring greater stiffness and a higher heat distortion temperature.

- Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications - Meets the requirements of FDA regulation for direct food contact - Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die - Excellent melt stability and good melt strength - Nylene NX3024 does not absorb food odors

- High crystallinity, extrusion grade nylon 6 resin suitabale for both cast and blown film in mono- and co-extrusions. - Suitable for some profile extrusion such as tubing, shapes, etc. - Good oxygen and flavor barrier to increase shelf life - Nylene films can be drawn to provide pockets for many food shapes and does not absorb food odors. - Offers chemical and heat resistance for hot filling wide range of food and chemicals

- High viscosity nylon 6 designed for the extrusion of blown film (both mono-layer and multi-layer film structures). - Suitable for profile extrusion such as tubing, shapes, etc. - Good oxygen and flavor barrier to increase shelf life - Nylene NX3064N has superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors. - Nylene films can be drawn to provide pockets for many food shapes. - Offers chemical and heat resistance for hot filling wide range of food and chemicals

- Nylene NX3411HSL Hi-RV is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- Nylene NX3411HSL is a high viscosity, heat stabilized, extrusion grade, nylon 6 with a special lubrication package to enhance antiblock properties. - Optimum processing conditions should permit for a melt temperature of approximately 500°F at the die.

- High viscosity, nucleated, nylon 6 extrusion grade resin - Crystallization initiators provide rapid melt set-up in higher speed processing applications - Optimum processing conditions should provide a melt temperature of 550 - 575°F at the die

- High viscosity, UV stabilized extrusion grade nylon resistant to degradation by ultraviolet light - The elevated quality of UV resistance is attributed to highly uniform dispersion of 2% carbon black - With an ASTM viscosity of 200, NX4301 has very good melt flow and melt strength characteristics which are important for profile extrusion - Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die. (Available in black only)

- Nucleated extrusion grade suitable for cast and blown film - Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors - Excellent melt stability and good melt strength, plus faster set-up for increased line speeds

- Heat stabilized nylon copolymer with 14% glass fiber reinforcement - Suitable for such uses as under-the-hood fluid reservoirs - Maximum clarity is achieved by using low mold temperatures - Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids

- Heat stabilized, lubricated nylon 6 intended for use in coating wire, usually extrusion coated over a layer of PVC on electrical wires for toughness, temperature resistance, and insulating properties, and contains a high slip additive for ease of use when pulling wire through conduit. - Delivered dry, with less than 0.2% moisture, and can be extruded as received.