CONTINUUM™ DGDC-2502 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDC-2502 NT has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC3 - Black - PE445574C CC3 (see Notes A and B) - Plastics Pipe Institute (PPI): TR-4Natural Pipe - CONTINUUM DGDC-2502 NT ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - Black Pipe - CONTINUUM DGDC-2502 BK (see Note A & B)ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - ISO PE100 pipe grade - MRS 10 @ 20° C - NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2502 NT - Black Pipe - DGDC-2502 BK (see Note A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK). (B) Natural resin extruded under proper conditions with 6.5% carbon black masterbatch DFNF-0092 BK.

CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance ASTM D 3350: cell classification - Black - PE445574 CC0 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) - ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDD-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance - ASTM D 3350: cell classification -- Natural - PE445574A -- Black - PE445574C (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in compression and injection molded beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. CONTINUUM™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. CONTINUUM™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end results are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. Main Characteristics: - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

CONTINUUM™ DMDC-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA-DMF - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDC-1270 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Additive Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection - USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes

CONTINUUM™ DMDD-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details.

CONTINUUM™ DMDE-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Agent Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a. Consult the regulations for complete details.

DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDF-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

8 Melt, Prime High Density Polyethylene Homopolymer, FDA Compliant

MINERAL AND NUCLEATOR MASTERBATCH HM-237E is an additive concentrate containing both a Mineral additive for resin displacement and as a process aide; plus a highly efficient Nucleator. Nucleation and mineral combinations in LLDPE can improve film properties and yield rates. In HDPE blow molding HM-237E can reduce cycle time and achieve better control over shrinkage characteristics. In injection molding applications improvements in the dimensional stability and reductions in cycle time can be attained. Key Features: - Designed to be added to polyethylene film, extrusion, blow molding and injection molding resins. - Also used to improve properties/processing in PP resins - Excellent dispersion of additive and Mineral - Uniform concentration of additives in concentrate form. - Masterbatch pellet form for ease of addition and feeding into extrusion equipment Directions for Use: - HM-237E is added to HDPE / LLDPE (and PP) at 2.5% to achieve improved crystallization for faster cooling, lower warpage especially between different colors. Achieve more uniform crystal sizes as the PE cools for improved gloss and barrier properties. FDA Compliance: - The components of this product are compliant with FDA requirements up to 9% LD by weight. Please consult with the FDA regulations for specific application requirements.

NUCLEATOR MASTERBATCH HM-664 is an additive concentrate containing Milliken's Hyperform® HPN-210M nucleator. This masterbatch compound is designed to reduce cycle time in injection molded polyethylene parts, improve stiffness and HDT, and reduce or improve warpage challenges during processing. Key Features: - Designed to be added to injection molded polyethylene parts - Improved stiffness, HDT and part uniformity - Uniform concentration of additives in concentrate form. - Masterbatch pellet form for ease of addition and feeding into extrusion equipment Directions for Use: - HM-664 is added to HDPE or LLDPE at 2.5% to 5% to achieve faster cooling, higher crystallization temperature and a higher crystallization rate. Parts are ejected from the mold with at a higher overall temperature but will have more completed crystal formation, allowing for a reduced overall cycle time. - Note: Effectiveness is significantly reduced in LDPE due to the high long chain branching of the polymer. LDPE with MI > 25 can present some of the above performance improvements. FDA Compliance: - This product is not approved for use in food contact applications at this time, but will be updated once regulatory tests are completed.