InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 100D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 70 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce drinking cups, bowls and containers, with wall thicknesses from 0.8 to 5.0 mm and trays (e.g. seedling trays), however can also be moulded with conventional wet moulding equipment.

InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 200D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 50 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce drinking cups, bowls and containers, with wall thicknesses from 1.2 to 5.0 mm and trays (e.g. seedling trays), however can also be moulded with conventional wet moulding equipment.

InPacto® D/NL type 100D/NL, 200D/NL and 300D/NL, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300D/NL can be expanded in conventional continuous pre-expanders using steam/air mixtures for good control of the density as well as batch expanders. The typical density range is 25 to 100 kg/m3 but other densities are possible depending on applications and equipment. The beads have been specially developed for use with high speed dry moulding equipment to produce trays (e.g. seedling trays) and containers (e.g. ice cream containers), with wall thicknesses from 2.5 to 8.0 mm, however can also be moulded with conventional wet moulding equipment.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300S/F1 can be molded on shape molding equipment. It can be used for producing thin wall, high strength contour moldings, with wall thickness <10mm, at high and medium density, for packaging or construction products, with excellent fusion at short molding cycle times or conditioning time. Pre-expanded foam make them readily mixable with clay, plaster or concrete. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 300SR/F1 is generally molded on shape molding equipment. Owing to its reduced pentane level, it is particularly suited to shape molded packaging, in particular at higher densities and wall thickness <10mm, where very short cycle times or very short conditioning times are required. The product is approved for direct contact with food.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 500S/F1 can be molded on both shape and block molding equipment. It can be used for medium and high density, high strength moldings with excellent fusion at short molding cycle times or conditioning time. Also medium and high density blocks, which can be cut to make insulation or packaging. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 500SR/F1 can be molded on both shape and block molding equipment’s. Owing to its reduced pentane level, it is particularly suited to shape molded packaging (e.g. home appliance packaging) > 10mm or high density, high quality blocks where very short cycle times or very short conditioning times are required. The product is approved for direct contact with food.

InPacto® S/F1 type 300S/F1, 500S/F1, 800S/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 800S/F1 can be molded on both shape and block molding equipment. It can be used for medium and high density blocks, which can be cut to make insulation or packaging. It may be used for large contour moldings. The product is approved for direct contact with food.

InPacto® SR/F1 type 300SR/F1, 500SR/F1, 800SR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain low level of hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InPacto® 800SR/F1 can be molded on both shape and block molding equipment. Owing to its reduced pentane level, it is particularly suited for high density, high quality blocks where very short cycles time or very short conditioning time are required. It may also be used for large contour moldings. The product is approved for direct contact with food.

InSphereF/CZ types 500F, 800F, 1000F, 1600F and 2000F are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1000F/CZ is mainly used for production of high-volume blocks with low density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere® B/NL type 100B, 300B, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InSphere® 100B/NL is normally expanded in discontinuous pre-expanders to achieve the low densities required in a single step expansion and good control of the density. The typical density is 12 kg/m3 but other densities are possible depending on applications and equipment. InSphere® 100B/NL is used to produce cellular bricks from a mixture of pre-expanded beads and clay, which are subsequently fired in a high temperature kiln. The low density pre-foam without lumps or agglomeration during pre-expansion make them readily mixable with clay, plaster or concrete. Also suitable as filler for medical pillows.

InSphereF/CZ types 500F, 800F, 1000F, 1600F and 2000F are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600F/CZ and InSphere 2000F/CZ are mainly used for production of high-volume blocks with low density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere F/NL type 300F/NL, 400F/NL, 500F/NL, 800F/NL and 1600F/NL is expandable polystyrene (EPS) with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600F/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere F/PL type 300F, 500F, 800F and 1600F is expandable polystyrene (EPS), the materials has a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600F/PL is mainly used for production of high volume blocks with low-density; of cutted boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere FC/NL type 300FC, 400FC, 500FC, 800FC and 1600FC is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600FC/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere FR/CZ types 500FR, 900FR, 1600FR and 2000FR are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and reduced content of a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600FR/CZ and InSphere 2000FR/CZ are mainly used for production of high-volume blocks with low density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere S/NL type 300S/NL, 500S/NL, 800S/NL, 1600S/NL is expandable polystyrene (EPS), with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. APPLICATION InSphere 1600S/NL can be moulded on block moulding equipment. It can be used to produce well fused blocks with improved Insulation properties at low and medium densities, which can be cut to make insulation and construction products. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphereF/CZ types 500F, 800F, 1000F, 1600F and 2000F are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600F/CZ and InSphere 2000F/CZ are mainly used for production of high-volume blocks with low density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere FR/CZ types 500FR, 900FR, 1600FR and 2000FR are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and reduced content of a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 1600FR/CZ and InSphere 2000FR/CZ are mainly used for production of high-volume blocks with low density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects.

InSphere® B/NL type 100B, 300B, is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. The product is suitable for objects intended for direct contact with food. APPLICATION InSphere® 300B/NL is normally expanded in discontinuous pre-expanders to achieve the low densities required in a single step expansion and good control of the density. The typical density is 11 kg/m3 but other densities are possible depending on applications and equipment. InSphere® 300B/NL is used to produce cellular bricks from a mixture of pre-expanded beads and clay, which are subsequently fired in a high temperature kiln. The low density pre-foam without lumps or agglomeration during pre-expansion make them readily mixable with clay, plaster or concrete. Also suitable as filler for bean bags and medical pillows.

InSphere F/NL type 300F/NL, 400F/NL, 500F/NL, 800F/NL and 1600F/NL is expandable polystyrene (EPS) with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 300F/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings and producing thin wall contour mouldings at medium to high densities with a wall thickness of <10mm, such as moulded panels and decorative profiles with good surface finish.

InSphere F/PL type 300F, 500F, 800F and 1600F is expandable polystyrene (EPS), the materials has a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 300F/PL is mainly used for production of shaped parts with high density and wall thickness less than 10 mm (e.g. shipping packaging for glass and electrical goods, building bricks, floor and roof shaped parts); production of smaller blocks with higher density or cutted profiles.

InSphere FC/NL type 300FC, 400FC, 500FC, 800FC and 1600FC is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 300FC/NL can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings and producing thin wall contour moulding at medium to high densities with a wall thickness of <10mm, such as moulded panels and decorative profiles with good surface finish.

InSphere FR/F1 type 300FR/F, 500FR/F1, 800FR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and low level of hydrocarbon blowing agent. Their surface is coated to support processing, to prevent electrostatic charge and reduce water absorption. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 300FR/F1 can be moulded on shape moulding equipment. It can be used for contour mouldings and producing thin wall contour moulding at medium to high densities with a wall thickness of <10mm, such as moulded panels (eg. perimeter insulation foam boards with reduced water absorption) and decorative profiles with good surface finish. Very short cycle times or very short conditioning times are required.

InSphere FR/F1 type 300FR/F, 500FR/F1, 800FR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and low level of hydrocarbon blowing agent. Their surface is coated to support processing, to prevent electrostatic charge and reduce water absorption. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 300FR/F1 can be moulded on shape moulding equipment. It can be used for contour mouldings and producing thin wall contour moulding at medium to high densities with a wall thickness of <10mm, such as moulded panels (eg. perimeter insulation foam boards with reduced water absorption) and decorative profiles with good surface finish. Very short cycle times or very short conditioning times are required.

InSphere S/NL type 300S/NL, 500S/NL, 800S/NL, 1600S/NL is expandable polystyrene (EPS), with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. APPLICATION InSphere 300S/NL can be molded on shape molding equipment. It can be used for producing thin wall, high strength contour moldings, with wall thickness <10mm, at high and medium density, for packaging or construction products, with excellent fusion at short molding cycle times or conditioning time. Pre-expanded foam makes them readily mixable with clay, plaster or concrete. The product is approved for direct contact with food.

InSphere F/NL type 300F/NL, 400F/NL, 500F/NL, 800F/NL and 1600F/NL is expandable polystyrene (EPS) with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 400F/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building & construction applications. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphereF/CZ types 500F, 800F, 1000F, 1600F and 2000F are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500F/CZ is mainly used for production of shape-moulded parts with wall thickness above 10 mm (e.g. shipping packaging for glass and electrical goods, building bricks, floor and roof shaped parts); production of smaller blocks with higher density or cut profiles.

InSphere F/NL type 300F/NL, 400F/NL, 500F/NL, 800F/NL and 1600F/NL is expandable polystyrene (EPS) with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500F/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building & construction applications. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere F/PL type 300F, 500F, 800F and 1600F is expandable polystyrene (EPS), the materials has a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500F/PL is mainly used for production of shaped parts with wall thickness above 10 mm (e.g. shipping packaging for glass and electrical goods, building bricks, floor and roof shaped parts); production of smaller blocks with higher density or cutted profiles.

InSphere FC/NL type 300FC, 400FC, 500FC, 800FC and 1600FC is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500FC/NL can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building & construction applications. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere FR/CZ types 500FR, 900FR, 1600FR and 2000FR are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and reduced content of a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500FR/CZ is mainly used for production of shape-moulded parts with wall thickness above 10 mm (e.g. shipping packaging for glass and electrical goods, building bricks, floor and roof shaped parts); production of smaller blocks with higher density or cut profiles.

InSphere FR/F1 type 300FR/F, 500FR/F1, 800FR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and low level of hydrocarbon blowing agent. Their surface is coated to support processing, to prevent electrostatic charge and reduce water absorption. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500FR/F1 is a robust grade can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products, where very short cycle times or very short conditioning times are required. It may also be used for large contour mouldings with a wall thickness >10mm. Other applications include elastified board for impact and airborne sound insulation, floor elements, sandwich panels, perimeter insulation foam boards with reduced water absorption.

InSphere FR/F1 type 300FR/F, 500FR/F1, 800FR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and low level of hydrocarbon blowing agent. Their surface is coated to support processing, to prevent electrostatic charge and reduce water absorption. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 500FR/F1 is a robust grade can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products, where very short cycle times or very short conditioning times are required. It may also be used for large contour mouldings with a wall thickness >10mm. Other applications include elastified board for impact and airborne sound insulation, floor elements, sandwich panels, perimeter insulation foam boards with reduced water absorption.

InSphere S/NL type 300S/NL, 500S/NL, 800S/NL, 1600S/NL is expandable polystyrene (EPS), with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. APPLICATION InSphere 500S/NL can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks with improved Insulation properties at medium and high densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building , construction and packaging applications. Other applications include elastified board for impact and airborne sound insulation, floor elements. The product is approved for direct contact with food.

InSphereF/CZ types 500F, 800F, 1000F, 1600F and 2000F are expandable polystyrene (EPS) in form of white spherical polystyrene beads that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent (pentane). Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 800F/CZ is mainly used for production of blocks with medium and higher density; of cut boards and profiles from the blocks for a thermal insulation e.g. building objects or in packaging technology.

InSphere F/NL type 300F/NL, 400F/NL, 500F/NL, 800F/NL and 1600F/NL is expandable polystyrene (EPS) with improved insulation properties, the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 800F/NL can be moulded on both shape and block moulding equipment with improved Insulation properties. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building & construction applications. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere F/PL type 300F, 500F, 800F and 1600F is expandable polystyrene (EPS), the materials has a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 800F/PL is mainly used for production of blocks with medium and higher density; of cutted boards and profiles from the blocks for a thermal insulation e.g. building objects or in packaging technology.

InSphere FC/NL type 300FC, 400FC, 500FC, 800FC and 1600FC is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and a hydrocarbon blowing agent. Their surface is coated to support processing and to prevent electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 800FC/NL can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings for building & construction applications. Other applications include elastified board for impact and airborne sound insulation, floor elements.

InSphere FR/F1 type 300FR/F, 500FR/F1, 800FR/F1 is expandable polystyrene (EPS), the materials have a form of white spherical polystyrene particles that contain a new type of flame retardant pFR (without HBCD) and low level of hydrocarbon blowing agent. Their surface is coated to support processing, to prevent electrostatic charge and reduce water absorption. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. APPLICATION InSphere 800FR/F1 is a robust grade can be moulded on both shape and block moulding equipment. It can be used to produce well fused blocks at low and medium densities, which can be cut to make insulation and construction products. It may also be used for large contour mouldings with a wall thickness >10mm. Other applications include, floor elements, roof elements, sandwich panels, perimeter insulation foam boards with reduced water absorption.