ALKATEQ™ HD3690P is a high density polyethylene ground powder, with a maximum particle size of <1200 micron. ALKATEQ™ HD3690P conforms to the requirements of the United States Food and Drug Administration Regulations CFR21 177.1520, paragraph (c), item 3.1a and, when used in accordance with FDA application guidelines, is suitable for food contact applications. Note: The product code followed by letters "-NAT" indicates natural, uncoloured product.

Alkatane HD0490 is an injection moulding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness. Alkatane HD0490 is intended for use in the production of stackable transport, storage and bottle crates and industrial mouldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

Base Polymer Polyethylene High Density Filler/Additive System 10 % glass fibres Special Features heat stabilised, easy release (demoulding), good flow, injection moulding grade Market Segment various

Base Polymer Polyethylene High Density Filler/Additive System 10 % glass fibres Special Features chemically coupled Typical Applications various

Base Polymer Polyethylene High Density Filler/Additive System 20 % glass fibres Typical Applications various

Base Polymer Polyethylene High Density Filler/Additive System 40 % glass fibres Typical Applications various

HDPE, 10% Fiberglass Filled.

HDPE, 20% Fiberglass Filled.

QTM Analene® 2700 HDPE tailored for injection molding. - Excellent flow - Good impact strength - Good stiffness - Durability and recyclability for sustainability - CA Prop 65 Compliant - FDA 21 CFR 177.1520 - RoHS compliant - ISO 10993 Part 5

HM-337 is a high-density polyethylene compound designed for applications like kayaks or boats that require a balance very high stiffness and extreme toughness. Key Features: - Good moldability - Excellent long term outdoor weatherability (UV15) - Superior balance of toughness and rigidity - Very High Stiffness - Excellent low temperature impact - Compounded for uniform additive dispersion - Natural as well as standard, custom or special effect colors available - Stock colors may be available. See Stock color bulletin - Also available in powder form as HMP-337

HMP-334 is the 35 mesh powder form of a High Density Polyethylene compound for rotational molding. HMP-334 applications include boats, canoes, kayaks and other water sport applications requiring good strength and toughness. Key Features: - Available as HMP, 35-mesh powder, or HM, pellets. - Good moldability - Excellent long term outdoor weatherability, UV8 - Balance of toughness and rigidity - Good low temperature impact - Improved stiffness - Compounded for uniform additive dispersion - Natural, Standard, custom or special effect colors available - Excellent opacity

HMP-335 is a high-density polyethylene compound designed for applications like kayaks or boats that require a balance high stiffness and extreme toughness. Key Features: - 35-mesh powder - Good moldability - Excellent long term outdoor weatherability (UV15) - Superior balance of toughness and rigidity - High Stiffness - Excellent low temperature impact - Compounded for uniform additive dispersion - Natural as well as standard, custom or special effect colors available - Stock colors may be available. See Stock color bulletin - Also available in pellet form as HM-335

HMP-337 is a high-density polyethylene compound designed for applications like kayaks or boats that require a balance very high stiffness and extreme toughness. Key Features: - 35-mesh powder - Good moldability - Excellent long term outdoor weatherability (UV15) - Superior balance of toughness and rigidity - Very High Stiffness - Excellent low temperature impact - Compounded for uniform additive dispersion - Natural as well as standard, custom or special effect colors available - Stock colors may be available. See Stock color bulletin - Also available in pellet form as HM-337

BL1 is a high density polyethylene grade, suitable for blow moulding applications. Characteristics: - Good flow ability. Typical applications are: - Milk bottles. - Shakers for powders. * BL1 is suitable for food contact.

BL2 is a high density polyethylene grade, suitable for blow moulding applications. Characteristics: - High rigidity. - Good flow ability. - Good impact strength. - Good stress cracking resistance. Typical applications are: - Disinfectant bottles up to 2 litres capacity. - Containers up to 50 litres. - Petrol cans up to 5 litres. * BL2 is suitable for food contact.

BL3 is a high density polyethylene grade with broad molecular weight distribution, suitable for blow moulding applications. Characteristics: - High rigidity. - Good flow ability. - Good impact strength. - Good stress cracking resistance. Typical applications are: - Containers ranging from a few ml up to 10 litres. - Sheets for thermoforming. * BL3 is suitable for food contact.

BL4 is a high density polyethylene grade with high molecular weight, suitable for blow moulding applications. Characteristics: - High rigidity. - Good impact strength. - Excellent surface finish. - High stress cracking resistance. Typical applications are: - Containers from 1 litre up to 200 litres capacity. * BL4 is suitable for food contact.

BL5 is a high density polyethylene grade with high molecular weight, suitable for blow moulding applications. Characteristics: - High toughness. - Good impact strength. - Good stress cracking resistance. Typical applications are: - Large containers above 10 litres capacity. - Semi-finished stocks. * BL5 is suitable for food contact.

BL6 is a high density polyethylene grade with high molecular weight, suitable for blow moulding applications. Characteristics: - High toughness. - Good impact strength. - Good stress cracking resistance. Typical applications are: - Large containers above 10 litres capacity. - Semi-finished stocks. * BL6 is suitable for food contact.

EX1 is a high density polyethylene grade with broad molecular weight distribution and good processing properties, suitable for film extrusion applications. Typical applications are: - Tubular and flat films. - Stretched film tapes. * EX1 is suitable for food contact.

EX2 is a high density polyethylene grade, suitable for extrusion of monofilament applications. * EX2 is suitable for food contact.

EX3 (M5010T2N) is high molecular weight, high density polyethylene copolymers, developed as general purpose resin for use in pressure and non-pressure pipes. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. EX3 (GM5010T2N) offer excellent chemical resistance and environmental stress crack resistance. EX3 (GM5010T2N) is suitable for extrusion into a full range of pipe and fittings sizes, where high density resins are required. EX3 (GM5010T2N) is suitable for use in transport of a wide range of fluids for industrial, rural and mining applications. Suitability for use in any application should be determined by appropriate performance testing. * EX3 (GM5010T2N) is suitable for food contact.

EX3B (GM5010T2) is a black, high molecular weight high density polyethylene copolymer, developed as a general purpose resin for use in pressure & nonpressure pipes. A minimum service life of 50 years is achievable under appropriate pressure & temperature conditions. EX3B (GM5010T2) offers excellent chemical resistance & environment stress crack resistance and will provide excellent resistance to the effects of ultra-violet light exposure in outdoor applications. EX3B (GM5010T2) is suitable for extrusion into a full range of pipe & fitting sizes, where high density, resins are required. EX3B (GM5010T2) is suitable for use in the transport of a wide range of fluids for industrial, rural & mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. * EX3B (GM5010T2) is suitable for food contact.

EX4 is a high molecular weight high density polyethylene grade, suitable for extrusion of paper like films. Typical applications are: - Wrapping. - Bags and carrier bags. * EX4is suitable for food contact.

I1 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications. Characteristics: - Very easy flowing. - High hardness. - High rigidity. - Largely free from distortion. Typical applications are: - Lightweight house-hold and disposable articles. - Large moulding and complicated parts where high toughness & stress cracking resistance is demanded. * I1 is suitable for food contact.

I2 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications. Characteristics: - Easy flowing. - Virtually free from distortion. Typical applications are: - Lightweight house-hold less hard and rigid than I1. * I2 is suitable for food contact.

I3 is a high density polyethylene grade, suitable for mass production injection moulding of articles in rapid shot sequence applications. Characteristics: - Low distortion tendency. - High hardness and rigidity. - Good toughness. - Good ESCR. Typical applications are: - Transport and stacking crates particularly bottle crates. * I3 is suitable for food contact.

I4 is a high density polyethylene grade, suitable for injection moulding applications. Characteristics: - Low distortion tendency. - High toughness. - Good ESCR. Typical applications are: - Thick-Walled, highly stressed transport containers e.g. refuse bins & fishcrates. - Screw caps. - Cable clips. * I4 is suitable for food contact.

HD5050EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding applications where a good environmental stress-cracking resistance is required. Characteristics: - Good environmental stress cracking resistance. - Good impact strength. - Good weathering resistance. Typical applications are: - Caps & closures. - Technical mouldings. - Bins. - Crates, boxes, household items. * HD5050EA is not suitable for organoleptic applications.

HD5050UA is an ultra-violet light stabilised high density polyethylene copolymergrade with a narrow molecular weight distribution, specially developed forinjection moulding applications where a good resistance to environmental stress cracking is required. Characteristics: - Good environmental stress cracking resistance. - High impact resistance, especially at low temperatures. - Good weathering resistance. Typical applications are: - Large dustbins & pails. - Pallet boxes. - Caps & closures. - Fish crates. - Technical parts. * HD5050UA is suitable for food contact.

HD5211EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Characteristics: - Good flow. - Good impact strength. Typical applications are: - House wares. - Caps & closures. - Toys. - Pails. - Cartridges. * HD5211EA is not suitable for organoleptic applications.

HD5218EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for thin wall injection moulding applications. Characteristics: - High flow. - High warpage resistance. - Suitable for fast cycling applications. Typical applications are: - House wares. - Caps & closures. - Thin walled containers. - PET bottle bases. * HD5218EA is suitable for food contact.

HD5620EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for thin wall injection moulding applications. Characteristics: - High flow. - High warpage resistance. - Suitable for fast cycling applications. Typical applications are: -House wares. - Caps & closures. - Thin walled containers. - PET bottle bases. * HD5620EA is suitable for food contact.

HD5740UA is an ultra-violet light stabilised high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding of heavy duty articles. Characteristics: - High rigidity. - High impact resistance, especially at low temperatures. - Good weathering resistance. Typical applications are: - Large dustbins & pails. - Pallet boxes. - Fish crates. - Technical parts. * HD5740UA is suitable for food contact.

HD5813EA is an easy flow high density polyethylene copolymer grade with a narrow molecular weight distribution, for injection moulding applications. Characteristics: - High flow. - High rigidity. - High warpage resistance. Typical applications are: - House wares. - Aerosol caps, closures. * HD5813EA is suitable for food contact.

HD6070EA is a high density polyethylene grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications. Characteristics: - Easy processing. - High rigidity. - Good impact strength - High warpage resistance. Typical applications are: - Caps & closures. - Crates. - Boxes. - Seats. - Pallets. - Structural foam. - Silicon cartridges. * HD6070EA is not suitable for organoleptic applications.

LP 477-01 is a high-density polyethylene posessing excellent impact strength for blow molded bleach and detergent bottles, thermoformed industrial parts, tote boxes, trays, liners and pharmaceutical packages.

Asrene® SF5007 is a bimodal HDPE resin which is supplied in natural pellet form and suitable for blown film, general packaging, industrial liners and various bags requiring excellent processability with high tensile strength, impact and tear strength. Product Characteristics: - Hexene copolymer - High molecular weight - Thin film processability - High tensile strength - High impact and tear strength Applications: - Blown film - General packaging - Industrial liners - Shopping bags - Disposal and groceries bags

Asrene® SM5508 is an HDPE resin which is supplied in natural pellet form and suitable for monofilament and flat yarn application, as well as for co-extrusion and lamination film requiring excellent process-ability, high tensile strength, good stretch-ability and elongation. Product Characteristics: - Excellent processability - High tensile strength - Good stretch-ability - Good elongation Applications: - Monofilament : general ropes and nets - Flat yarn : stretched tapes and tarpaulin - Film : co-extrusion and lamination film