Asrene® SP4808 is a bimodal HDPE resin which is supplied in natural pellet form and suitable for pressure pipes, water distribution pipes, sub-duct conduit, sewerage and industrial pipes requiring high tensile properties, excellent stress cracking resistance and long term hydrostatic strength. Product Characteristics: - High tensile properties - Excellent stress cracking resistance - Long term hydrostatic strength - Low sagging grade - sLPL @50 years = 10.78 MPa Applications: - PE-100 certified (MRS = 10 MPa) - Pressure pipes - Water distribution pipes (potable water certified) - Sub-duct conduit, sewerage and industrial pipes

Asrene® UB5206H is an HDPE resin which is supplied in natural pellet form and suitable for blow molding, drum and industrial parts, large-sized containers, synthetic rattan, water tank, as well as for non-pressure pipes requiring excellent impact resistance, ESCR, and rigidity. Product Characteristics: - Hexene copolymer - Excellent impact resistance - Excellent ESCR - Excellent rigidity Applications: - Blow molding - Large-sized containers (up to 150L) - Water tank - Drum and industrial parts - Non-pressure pipes - Synthetic Rattan

Asrene® UB5502H is an HDPE resin which is supplied in natural pellet form and suitable for blow molding, small sized containers, general purpose container, and industrial container application which require excellent process-ability with high ESCR, good rigidity, and good impact resistance characteristic. Product Characteristics: - Hexene copolymer - High ESCR - Good rigidity - Good impact resistance - Excellent processability Applications: - Blow molding - Small sized containers (up to 5L) - Household and industrial container - Food packaging - Pharmaceutical and personal care container

Asrene® UF5205H is a monomodal HDPE resin which is supplied in natural pellet form and suitable for blown film, shopping bags, grocery and seed bags, disposal bags, and industrial liners application which require good film impact and good tear strength characteristic. Product Characteristics: - Hexene copolymer - Good film impact - Good tear strength Applications: - Blown film - Shopping bags - Grocery and seed bags - Disposal bags - Industrial liners

HDPE BK is a general purpose high density polyethylene black compound manufactured from recycled polymer.

AUROlen® PE-HD black is a regranulated high density polyethylene injection molding grade. Contains sorted post-industrial plastic parts and sprues. Typical Applications: Automotive blends

AUROlen® PE-HD GF10 black is a regranulated high density polyethylene with 10% glass fiber reinforced injection molding grade. Contains sorted post-industrial plastic parts and sprues. Typical Applications: Various

AUROlen® PE-HD GF20 black is a regranulated high density polyethylene with 20% glass fiber reinforced injection molding grade. Contains sorted post-industrial plastic parts and sprues. Typical Applications: Various

AUROlen® PE-HD natural is a regranulated high density polyethylene injection molding grade. Contains sorted post-industrial plastic parts and sprues. Typical Applications: Automotive blends

AuroraTec™ 0895 is a HDPE with a good balance of processability and impact cold weather impact performance. High stiffness Maximum impact strength and toughness Formerly known as EnLene 895

AuroraTec™ 1001 is a homopolymer with outstanding stiffness with a good balance of processability and Cold Temperature impact High stiffness Maximum impact strength and toughness FDA 21 CFR 177.1520 Formerly known as EnLene 1001

AuroraTec™ 1061 is a homopolymer with outstanding stiffness with a good balance of processability and cold weather impact performance. High stiffness Maximum impact strength and toughness Formerly known as EnLene 1061

AuroraTec™ 2001 is a homopolymer with outstanding stiffness with a good balance of processability and Cold Temperature impact High stiffness Maximum impact strength and toughness FDA 21 CFR 177.1520 Formerly known as EnLene 2001

High Density Polyethylene Formerly known as EnLene 3052

AuroraTec™ 3501 is designed for general purpose blow molding applications and extrusion Cold Temperature impact High stiffness Excellent stress crack resistance FDA 21 CFR 177.1520 Formerly known as EnLene 3501E

AuroraTec™ 3501 is designed for general purpose blow molding applications and extrusion, Cold Temperature impact, High Stiffness, Excellent Crack Resistance Contains a special slip agent which furter reduces the surface coefficent of friction FDA 21 CFR 177.1520 Formerly known as EnLene 3501ES

High Density Polyethylene Master Batch Formerly known as Chemblend FFD0013

AuroraTec™ 3001 is a Copolymer with outstanding stiffness with a good balance of processability and Cold Temperature impact Maximum impact strength and toughness FDA 21 CFR 177.1520 Formerly known as EnLene 3001

30% Glass Reinforced High Density Polyethylene Formerly known as EnLene 30GF

AXELERON™ CC B-3485 NT 是一种可发泡的、高分子量、高密度聚乙烯绝缘材料，专门用于发泡/表皮单芯电话线线。该材料含有一种化学发泡剂，采用温控挤出加工时可以得到50%的发泡量。这个高度稳定的产品具有优异的机械性能和电性能，应用于高速挤出加工线。 规格要求： 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ CC B-3485 NT 作为绝缘材料的电话线应该满足以下规格的要求： - REA PE “带有发泡绝缘材料的填充电话电缆” - ICEA S-84-608 “电信电缆；填充的聚烯烃绝缘的铜导线 —— 技术要求”

AXELERON™ CC B-3487 NT 是一种高密度聚乙烯孔洞材料，用于电话线和其他孔洞结构的绝缘材料的发泡/表皮层。该材料含有一种化学发泡剂，采用温控挤出加工时可以得到50%的发泡量。AXELERON™ CC B-3487 NT 具有独特的抗氧剂体系，在油脂填充的电缆应用领域具有优异的长期绝缘耐老化性能。 建议将这种材料用于在炎热环境下工作的产品。在采用正确的商用挤出机挤出加工规范的条件下，该产品应该可以满足Telcordia GR 421 CORE 和 ICEA S-84-608规格中对绝缘耐老化性能的严格要求。AXELERON™ CC B-3487 NT 具有优异的挤出加工特性，使用该产品制备的绝缘产品具有优异的机械性能和电性能。

AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS K-3364 NT CPD provides excellent processability for high-speed wire insulating extrusion processes. AXELERON™ CS K-3364 NT CPD provides good performance for telephone insulation applications, primarily cable designs for aerial environments. AXELERON™ CS K-3364 NT CPD is optimized to meet major international age testing standards and specifications for both solid and foam/skin insulation use. Specifications AXELERON™ CS K-3364 NT CPD meets the following raw material specifications: - ASTM D 1248 Type III Category A-4, Grade E8 and E9 - Federal LP-390 C, II-H, Grades 1 and 2, Category 4 - ISO 1872-PE, KHKN,45-D006 Telephone wire insulated with AXELERON™ CS K-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications: - ICEA S-84-608 - EN-50290-2-23 - IEC 60708 - DIN VDE 0819-103 - BS 6234 type H03 - NF C 32-060

AXELERON™ CS L-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, especially in the more demanding Power over Ethernet (PoE) and grease-filled cable applications while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS L-3364 NT CPD is designed for excellent processability for high-speed wire insulating extrusion processes. AXELERON™ CS L-3364 NT CPD provides excellent performance across the full range of network data cable and telephone insulation applications. AXELERON™ CS L-3364 NT CPD is optimized to meet rigorous Telcordia requirements, as well as all major international age testing standards and specifications for use as both solid and foam/skin insulation. There is also considerable AXELERON™ CS L-3364 NT CPD use in a wide variety of other twisted pair, coaxial, hybrid data and power cable designs. Specifications AXELERON™ CS L-3364 NT CPD meets the following raw material specifications: - ASTM D 1248 Type III Category A-4, Grade E8 and E9 - Federal LP-390 C, II-H, Grades 1 and 2, Category 4 Network & industrial ethernet data cable and telephone wire insulated with AXELERON™ CS L-3364 NT CPD, using sound commercial extrusion practices, should meet the cable specifications including but not limited to: - ICEA S-116-732 Category 6 & 6A, ANSI/NEMA WC-66 Category 3-6A - ANSI/TIA-568-C.2 Category 5E, 6, & 6A - IEEE Specification: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4 - REA PE 39 "Filled Telephone Cable" & REA PE 89 "Filled Telephone Cable with Expanded Insulation" - Telcordia GR-421-CORE, Issue 1; 3 "Generic Requirements for Metallic Telecommunications Cables" - ICEA S-84-608 "Telecommunications Cable; Filled, Polyolefin Insulated, Copper Conductor - Technical Requirements"

AXELERON™ CS O-3364 NT 是一种分子量高、高密度的聚乙烯绝缘材料，具有优异的抗氧化稳定性、韧性和耐磨性能。AXELERON™ CS O-3364 NT 以可在高速绝缘材料挤出加工线上提供优异的加工性能。AXELERON™ CS O-3364 NT 绝缘材料已经经过优化，提高了绝缘材料的导体粘连。这种较高的导体粘连由提高了厚壁绝缘材料和诸如数据用LAN双绞线的加工范围和绝缘材料的回缩性能。 AXELERON™ CS O-3364 NT 可为所有种类的电信用双绞线带来良好的性能表现。AXELERON™ CS O-3364 NT 可以轻松地满足对实心和发泡/表皮电话电缆绝缘材料的Telcordia 和ICEA 要求以及绝大多数国际上的老化测试标准和规格要求。AXELERON™ CS O-3364 NT 可提供优异的长期耐老化性能，满足严格的Telcordia测试要求。 规格要求： AXELERON™ CS O-3364 NT 满足以下材料规格要求： - ASTM D 1248 Type III Category A-4, Grade E8 和 E9 - 联邦LP-390 C, II-H, Grades 1 和 2, Category 4 在使用了适当的设计和制造规范的情况下，采用 AXELERON™ CS O-3364 NT 作为绝缘材料的电话线可满足以下规格要求： - Telcordia GR-421-CORE, 第一期, 1998年12月份, “金属电信电缆的一般要求” - ICEA S-84-608, “电信电缆；充填的聚烯烃绝缘的铜导线 —— 技术要求” - REA PE 39, “充填电话电缆” - REA PE 89, “带有发泡绝缘的充填电话电缆”

AXELERON™ CX 6923 NT CPD is a high density polyethylene compound designed for use in physical foaming processes where high expansion rates (60 - 80%) are required. This compound is designed to offer excellent high speed processability as given by low extrusion pressures and smooth insulation surface quality. Furthermore, since it is fully pre-compounded with all the necessary ingredients, it offers better dispersion of the nucleating agent allowing higher expansion rates to be achieved with more consistent processability (capacitance and diameter). It is stabilized for long term cable performance with minimal impact on signal attenuation. Applications: Typical applications include conventional 75 Ohm CATV cables and LAN cables. Specifications: AXELERON™ CX 6923 NT CPD meets the following material specifications: - ASTM D 1248 Class A, Type III, Category 3 - ISO 1875-PE, KGHN, 45-D-045

高密度绝缘材料 AXELERON™ CX A-6944 NT 是一种高密度聚乙烯树脂，用于制作CATV电缆用的气注发泡绝缘材料。这种高密度聚乙烯树脂具有优异的电性能和韧性，以及其应用领域所需的稳定性。AXELERON™ CX A-6944 NT 常与AXELERON™ CX 1253 NT CPD LDPE一同使用。为了达成最优的泡孔结构，建议加入0.1%至 0.3%的成核剂，比如AXELERON™ CX A-0012 NT CPD 和AXELERON™ CX 0078 NT CPD 母料所添加的成核剂。 规格 AXELERON™ CX A-6944 NT 满足以下原材料规格要求： - ASTM D 1248 Type IV, Class A, Category 3 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ CX A-6944 NT 作为绝缘材料的电线应该满足以下规格要求： - Telecordia GR-1398-CORE - Telecordia GR-1399-CORE

AXELERON™ FO 1311 NT CPD is a high-performance compound with an outstanding balance of processability and toughness. It is designed for use in Submarine fiber optical cable as well as other power and telecommunication jacketing. AXELERON™ FO 1311 NT CPD also has excellent electrical properties, superior environmental stress crack resistance and excellent UV resistance. Specifications AXELERON™ FO 1311 NT CPD meets the following material specification: - ASTM D-1248 Type III, Class A, Category 5, Grade E9 Cables jacketed with AXELERON™ FO 1311 NT CPD, using industry standard commercial extrusion practice, should meet the following cable specifications: - IEC 60502, ST 7 - IEC 62067, ST 7 - IEC 60840, ST 7 - ICEA S-94 649 - ICEA S-108 720 - ICEA S-97 682 - ICEA-S-87-640 - IEC 60794

高密度电缆护套材料 AXELERON™ FO A-6318 BK 是一种采用UNIPOL™ PE工艺制备的高密度聚乙烯护套材料。此材料具有非常好的工艺性能，低收缩特性，在韧性、耐应力开裂、耐磨性能，防白蚁和耐候性能上具有较好的平衡性。 AXELERON™ FO A-6318 BK 适合作为光缆电缆的护套材料。 规格 AXELERON™ FO A-6318 BK 满足以下原材料规格要求： - ASTM D 1248 Type III, Class C, Category 4, Grades E8, E9 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ FO A-6318 BK 作为护套材料的电线和电缆应该满足以下规格要求： - ICEA: S-61-402 - ANSI: C8.35 - REA PE 39 and PE 89 - IEC 60502

AXELERON™ GP A-7590 NT 是一种双峰聚乙烯树脂，用于通讯和电力电缆护套。AXELERON™ GP A-7590 NT 具有优异的耐环境应力开裂性能和低温性能。 规格 AXELERON™ GP A-7590 NT 满足以下材料规格： - ASTM D1248 Type III, Class A, Category 5, Grade J5

AXELERON™ GP K-3479 BK CPD is a high-molecular weight, high density polyethylene compound ("CPD") produced from resin made by the UNIPOL™ process. AXELERON™ GP K-3479 BK CPD is a prime quality telephone and power cable black jacketing that provides good toughness, stress-cracking resistance, outdoor weatherability and abrasion resistance. Specifications AXELERON™ GP K-3479 BK CPD meets the following raw material specifications: - ASTM D-1248: Type III, Class C, Category 5, Grades E10 and J4, J5 - Federal LP-390C: Type III, Class H, Grade 1, Category 5 - REA PE 39 and PE 89 (Raw Material Sections) Cable jacketed with AXELERON™ GP K-3479 BK CPD, using sound commercial extrusion practices, should meet the following specifications: - ICEA: S-61-402; NEMA WC5 - REA PE 39 and PE 89 - ANSI: C8.35 - IEC 60502

AZR Ecoplast 143 HDPE black 0.5 is high impact resistance in - extruder made thermoplastic polyethylene with a low temperature plastic composite profile for injection molding. AZR Ecoplast 143 HDPE black 0.5 is controlled technology extra high impact resistance thermoplastic polyethylene with rheological properties even at low temperatures. Applications: AZR Ecoplast 143 HDPE black 0.5 is designed to offer excellent stiffness, low warping, good/acceptable toughness, plasticity and good moldability (extrudability). This resin is ideally suited for injection molded crates, cases, trays, tote, containers, bins and other objects requiring high rigidity. Food Contact: AZR Ecoplast 143 HDPE black 0.5 complies with EU directive 10/2011.

AZR Ecoplast 143 HDPE green 0.3 is high impact resistance in - extruder made thermoplastic polyethylene with a low temperature plastic composite profile for injection molding. AZR Ecoplast 143 HDPE green 0.3 is controlled technology extra high impact resistance thermoplastic polyethylene with rheological properties even at low temperatures. Applications: AZR Ecoplast 143 HDPE green 0.3 is designed to offer excellent stiffness, low warping, good/acceptable toughness, plasticity and good moldability (extrudability). This resin is ideally suited for injection molded crates, cases, trays, tote, containers, bins and other objects requiring high rigidity. Food Contact: AZR Ecoplast 143 HDPE green 0.3 complies with EU directive 10/2011.

AZR Ecoplast 143 HDPE grey 0.35 is high impact resistance in - extruder made thermoplastic polyethylene with a low temperature plastic composite profile for injection molding. AZR Ecoplast 143 HDPE grey 0.35 is controlled technology extra high impact resistance thermoplastic polyethylene with rheological properties even at low temperatures. Applications: AZR Ecoplast 143 HDPE grey 0.35 is designed to offer excellent stiffness, low warping, good/acceptable toughness, plasticity and good moldability (extrudability). This resin is ideally suited for injection molded crates, cases, trays, tote, containers, bins and other objects requiring high rigidity. Food Contact: AZR Ecoplast 143 HDPE grey 0.35 complies with EU directive 10/2011.

AZR Ecoplast 143 HDPE red 0.4 is high impact resistance in — extruder made thermoplastic polyethylene with a low temperature plastic composite profile for injection molding. AZR Ecoplast 143 HDPE red 0.4 is controlled technology extra high impact resistance thermoplastic polyethylene with rheological properties even at low temperatures. Applications: AZR Ecoplast 143 HDPE red 0.4 is designed to offer excellent stiffness, low warping, good/acceptable toughness, plasticity and good moldability (extrudability). This resin is ideally suited for injection molded crates, cases, trays, tote, containers, bins and other objects requiring high rigidity. Food Contact: AZR Ecoplast 143 HDPE red 0.4 complies with EU directive 10/2011.

This resin is a high density polyethylene homopolymer for blow molding applications. It is recommended for applications that require high top load strength and good stiffness. This product meets US FDA 21 CFR 177.1520.

General Purpose. This product meets US FDA 21 CFR 177.1520.

This narrow molecular weight distribution injection molding resin. This resin offers excellent impact strength, ESCR properties, and resistance to warpage. This product meets US FDA 21 CFR 177.1520.

This is a narrow molecular weight distribution injection molding resin. This resin offers good impact strength, resistance to warpage, and stiffness. This product meets US FDA 21 CFR 177.1520.