DESCRIPTION Cosmic E4920D is a mineral filled epoxy molding compound which is available either in a granular form, or preformed in a variety of sizes and weights. FEATURES It has excellent moisture resistance, thermal cycling stability and outstanding moldability. Parts molded from this material do not support fungus growth. It is available in a wide flow range to suit custom molding requirements. E4920D can be supplied in black, gold, green or red. It has a shelf life of eight months when stored at 5°C. APPLICATIONS It is designed for encapsulation of passive devices such as capacitors, inductors, diodes and rectifiers.

DESCRIPTION Cosmic E4920FC is a mineral filled epoxy molding compound which is available either in a granular form, or preformed in a variety of sizes and weights. FEATURES It has excellent moisture resistance, thermal cycling stability and outstanding moldability. Parts molded from this material do not support fungus growth. It is available in a wide flow range to suit custom molding requirements. E4920FC can be supplied in black, gold, green or red . It has a shelf life of eight months when stored at 5°C. APPLICATIONS It is designed for encapsulation of passive devices such as capacitors, inductors, diodes and rectifiers.

DESCRIPTION Cosmic E4930R is a mineral filled, application specific epoxy molding compound which is supplied in a granular form. FEATURES It has excellent moisture resistance and thermal cycling stability. Standard spiral flow range is 30-40" (EMMI) at 160°C and 1000 psi, and a flow duration of 40-50 seconds at 325 - 1000 psi. It has a hot plate gel time of 35-45 seconds at 160°C. APPLICATIONS Used to encapsulate optocouplers, capacitors, resistors, resistor networks, transistors, SOIS's and QFP.

DESCRIPTION Cosmic E4940P is a mineral filled, glass reinforced epoxy molding compound which is supplied in a granular form. FEATURES It has excellent dimensional stability, improved thermal cycling and exceptional moisture resistance. Standard spiral flow range is 25-35" (EMMI) at 150°C and 1000 psi. It has a hot plate gel time of 22-30 seconds at 160°C, and 18-26 seconds at 182°C. It has a shelf life of eight months when stored at 5°C. APPLICATIONS It is designed for use in high-volume encapsulation of resistor networks and fiber-optic connectors requiring high quality, reliability and good moldability.

DESCRIPTION Cosmic E4940S is a mineral filled epoxy molding compound which is supplied in a granular form. FEATURES It has excellent dimensional stability, improved thermal cycling and exceptional moisture resistance. Standard spiral flow range is 25-35" (EMMI) at 150°C and 1000 psi. It has a hot plate gel time of 22-30 seconds at 160°C, and 18-26 seconds at 182°C. It has a shelf life of eight months when stored at 5°C. APPLICATIONS It is designed for use in high-volume encapsulation of resistor networks and fiber-optic connectors requiring high quality, reliability and good moldability.

Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile coating is a liquid resin that is safe and easy to use. It does not contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV). Deco-Coat 2501 Resin forms a tough, durable coating that is impervious to moisture, solvents, and cosmetics. These unique coatings are formulated for maximum durability and aesthetic appeal. They can be air dried at room temperature or baked to form a "bubble free" finish without any blushing or surface imperfections. Deco-Coat 2501 Resins exhibit excellent adhesion to a variety of substrates including plated metals, glass, plastics, wood, concrete, fabric, etc... DC-2501 Resins are available in clear and an unlimited assortment of opaque and transparent colors. We also offer pearlescence, metallic, and glitter finishes. Applications: - Epoxy finish for costume and fashion jewelry - Rigid bubble coatings on decals, labels, emblems, and lapel pins - Color fill lapel pins, emblems, key tags, plaques, and insignias - Coat wooden floors and tables - Decoupage coating on veneer, cypress or other woods

Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile coating is a liquid resin that is safe and easy to use. It does not contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV). Deco-Coat 2501 Resin forms a tough, durable coating that is impervious to moisture, solvents, and cosmetics. These unique coatings are formulated for maximum durability and aesthetic appeal. They can be air dried at room temperature or baked to form a "bubble free" finish without any blushing or surface imperfections. Deco-Coat 2501 Resins exhibit excellent adhesion to a variety of substrates including plated metals, glass, plastics, wood, concrete, fabric, etc... DC-2501 Resins are available in clear and an unlimited assortment of opaque and transparent colors. We also offer pearlescence, metallic, and glitter finishes. Applications: - Epoxy finish for costume and fashion jewelry - Rigid bubble coatings on decals, labels, emblems, and lapel pins - Color fill lapel pins, emblems, key tags, plaques, and insignias - Coat wooden floors and tables - Decoupage coating on veneer, cypress or other woods

Deco-Coat 2510 Resin System is a two component, low viscosity, rigid epoxy decorative coating. This high gloss resin is "water clear." It is formulated with UV stabilizers and other proprietary additives which helps prevent premature yellowing & degradation. While providing optimum clarity the DC-2510 enhances the substrates & images to which it is applied. It will cure at room temperature or may be accelerated with mild heat and contains a proprietary air release additive which allows for an air bubble free high gloss dome coating. Applications: - Labels - Plaques - Emblems - Badges - Lapel Pins - Key Tags - Luggage Tags - Ornaments

Deco-Coat 2550 Resin System is a two component, low viscosity, flexible epoxy decorative coating. This versatile coating is a liquid resin that is safe and easy to use. It does not contain any solvents or offensive odors. Deco-Coat 2550 provides optimum clarity and increased UV protection with an epoxy system. Deco-Coat 2550, when used with curing agent DC-87HC, is characterized by outstanding abrasion and wear resistance. This unique coating cures at room temperature to form a "bubble free", flexible coating, impervious to moisture and chemicals. DC-2550 exhibits excellent adhesion to a variety of substrates including plated metals, pressure sensitive labels, glass, plastics, wood, concrete, fabric, etc… Applications: - Labels - Emblems - Lapel pins - Luggage tags - Plaques - Badges - Key Tags - Wood trim kits

UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance. Applications: - UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock. Benefits: - No weighing or mixing - Single component - Cures in minutes - Non-solvent 100% solids system - Can be cured with low intensity black light

UV Cure 7155™ and 7156™ are low intensity UV Curable Epoxy Resins. These products are water clear and cure to a smooth, bubble free finish. Low cost, low intensity lights are all that is needed to cure these unique polymer systems. UV Cure 7155™ and 7156™ also have superior aging and yellowing resistance. Applications: - UV Cure 7155™ and 7156™ may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc… UV Cure 7155™ and 7156™ have outstanding adhesion to photographic paper. Their high gloss finish and outstanding clarity will enhance any image it is applied over. These materials can also be used as protective coatings due to their ability to resist moisture, chemicals and thermal shock. Benefits: - No weighing or mixing - Single component - Cures in minutes - Non-solvent 100% solids system - Can be cured with low intensity black light

Super-fast epoxy which bonds to metals, glass, fiberglass, and ceramics. Sets up in 30 seconds for instant adhesion Intended Use: - Repairing furniture, jewelry, china, appliances and models. Product features: - 100% reactive, no solvents - Parts fixture in less than 1 minute - Fast-curing adhesive that bonds metals

Flexible epoxy with good impact resistance, peel strength, and excellent chemical resistance. Intended Use: - Sign/display, appliance, metalworking, and furniture industries. Product features: - Good impact resistance - Self-leveling liquid - High shear strength

Extremely strong, medium-cure, water-resistant clear adhesive that will self-level after application. Intended Use: - Bonding parts in a structural environment or potting electronic components and assemblies Product features: - Cures without shrinking - Cures at room temperature - Good impact resistance - Produces strong, rigid bond on metal, ceramics, wood, concrete, glass, or combinations

Thixotropic/non-migrating gel adhesive with excellent gap-filling properties. Intended Use: - Bonding metal, ceramic, wood and vertical surface where gap-filling is needed. Product features: - Good solvent resistance - Fills gaps to .250 inches - Non-sagging adhesive

A rapid-curing, general purpose adhesive/encapsulant. Intended Use: - Bonds metals, fabrics, ceramics, glass, wood, and concrete (in combinations) Product features: - 100% reactive, no solvents - Good solvent resistance - Bonds metals, fabrics, wood, and concrete

Aluminum-filled, pourable epoxy for making molds, patterns, and holding fixtures that can be machined, drilled, or tapped. Intended Use: - Mold-making, patterns, holding fixtures, leveling equipment Product features: - Machinable to metallic finish - Low viscosity, self-leveling liquid - Castable - Low shrinkage

Aluminum-filled epoxy putty for dependable nonrusting repairs to aluminum castings, machinery, and equipment widely used in HVAC applications Intended Use: - Patch aluminum castings; make jigs, dies, and holding fixtures Product features: - Can be machined, drilled, or tapped using conventional metalworking tools - Bonds to aluminum, concrete, and many other metals - Fills voids or pores in castings

Bronze-filled epoxy for repairing, rebuilding, and maintaining bronze parts and equipment Intended Use: - Repair, rebuild, and maintain marine propellers, shafts, trays, chutes, gate valves, and pump wear rings Product features: - Resistant to chemicals and most acids, bases, solvents, and alkalis - Machinable to metallic finish - Bonds to ferrous and non-ferrous metals

A brushable, high performance ceramic-filled epoxy for sealing, protecting and repairing surfaces subject to erosion, corrosion and wear. Intended Use: - Seal and protect new equipment exposed to erosion and corrosion; protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat for providing exceptionally smooth surface to repaired surfaces Product features: - Approved for use in meat and poultry plants (red only) - Excellent chemical resistance - Temperature resistance to 350°F - Applies easily with short-bristle brush or roller - Low viscosity, self-leveling liquid

A brushable, high-performance, ceramic-filled epoxy for sealing, protecting, and repairing surfaces subject to erosion, corrosion, and wear Intended Use: - Protect pump casings, impeller blades, gate valves, water boxes, and fan blades; rebuild heat exchangers, tube sheets, and other water circulating equipment; top coat on repaired surfaces; seal and protect new equipment exposed to erosion and corrosion Product features: - Excellent chemical resistance - Temperature resistance to 350°F - Applies easily with short-bristle brush or roller - Low viscosity, self-leveling liquid - Acceptable for use in meat and poultry plants - NSF® Approved (Certified to ANSI/NSF61)

Silicon carbide-filled epoxy putty for economical protection against wear and abrasion Intended Use: - Applications involving particulate less than 1/16": pipe elbows, pulverizers and slurry lines, cyclones and exhauster fans, chutes Product features: - Non-sagging - Extremely wear resistant - Room temperature cure

A high performance, trowelable, ceramic-filled epoxy for rebuilding worn or damaged equipment. Intended Use: - Rebuild worn pump casings and suction plates; repair tube sheets, heat exchangers and other circulating water equipment; restore worn chutes and hoppers; repair and rebuild butterfly and gate valves. Product features: - Excellent chemical resistance - Resists corrosion, erosion and cavitation - Non-sagging, creamy putty

A high performance, trowelable, ceramic-filled epoxy for rebuilding worn or damaged equipment. Intended Use: - Rebuild worn pump casings and suction plates; repair tube sheets, heat exchangers and other circulating water equipment; restore worn chutes and hoppers; repair and rebuild butterfly and gate valves. Product features: - Excellent chemical resistance - Corrosion-, cavitation-, erosion-resistant - Non-sagging putty, creamy paste

High-tech, epoxy compound for quickly repairing processing equipment and returning to service in as little as 1.5 hours Intended Use: - Repair large cracks in large coal fuel lines; protect pipe elbows, exhauster fans and housings; repair chippers, bins, and hoppers Product features: - Bonds to wet surfaces - Excellent adhesion to metal, ceramic, and concrete - Reinforced with two bead sizes and silicon carbide

Filled epoxy grout for pouring machinery mounting pads to 6" deep and for rebuilding worn concrete. Intended Use: - For leveling compressors; generators; blowers; lathes; ball mills; engines; pulverizers; large pump bases; milling machines Product features: - Easy to mix - Self-leveling - Bonds to metal and concrete - Low shrinkage - Resists industrial chemicals

Alumina ceramic bead-filled epoxy system with outstanding wear and abrasion resistance for severe service conditions. Fast cure allows for repaired processing equipment to be returned to service in as little as 2 hours. Intended Use: - Repair scrubbers, ash handling systems, pipe elbows, screens, chutes, chippers, bins, hoppers, bunkers, separators and digester tables. Protect exhausters, launderers, housing fans, crushers, breakers, and conveyor screws. Product Features: - Fast cure for minimal downtime - Superior wear and abrasion resistance - Able to withstand impact - Resistant to a wide range of chemicals - Non-sagging

Alumina ceramic bead-filled epoxy system with a very fast cure speed, allowing for emergency patching of processing equipment. Provides wear and abrasion resistance for extended service life. Intended Use: - Patch holes, leaks and cracks in all types of processing equipment such as: scrubbers, ash handling systems, pipe elbows, screens, chutes, recontour chippers, bins, hoppers, bunkers, separators, digester tables, exhausters, launderers, housing fans, crushers and breakers. Product Features: - Eliminates downtime - Exceptionally fast cure for emergency patching - Applies to vertical and overhead surfaces - Easy to mix - Ceramic beads for wear resistance

Thixotropic epoxy gel system that improves ease of application and cured adhesion properties (shear, peel, impact) of Devcon® DFense Blok™ abrasion resistant product. Intended Use: - Apply to substrate surface prior to using DFense Blok™ for better adhesion. Product Features: - Requires no waiting to apply topcoat - Excellent chemical resistance - Non-sagging

DFense Blok™ is a revolutionary wear and abrasion alumina ceramic bead-filled epoxy compound. DFense Blok™ is formulated to significantly outlast traditional wear and abrasion products while also providing superior peformance in the most severe conditions. Intended Use: - Repair scrubbers, ash handling systems, pipe elbows, screens, chutes, chippers, bins, hoppers, bunkers, separators, digester tables. Protect exhausters, launderers, housing fans, crushers, breakers, and conveyor screws. Product Features: - Outstanding wear and abrasion resistance - Able to withstand high impact forces - Resistance to a wide range of chemicals - Non-sagging

An acid-resistant, room-temperature cured, 100% solids, epoxy coating Intended Use: - Ideal coating for chemical storage tanks, dike walls, and containment areas where chemical resistance to acids are needed. Product Features: - High build (8-10 mils) - Superior resistance to concentrated acids (including 98% sulfuric) - Applies with brush or roller - Excellent adhesion to concrete surfaces - Novolac resin

A 100% solids, 2-component, self-leveling, high impact, high abrasion floor coating with a chemical-resistant finish Intended Use: - Ideal floor coating for smooth or mildly spalled concrete (for high gloss finish); rebuild floors; protect floors from chemical attack Product Features: - Extremely durable - Produces a level, high-gloss finish - High build (8-10 mils)

A 100% solids, two-component, self-leveling, non-voc clear epoxy sealer for sealing and water-proofing concrete, masonry, and wood surfaces Intended Use: - Ideal clear coating high traffic areas. A good primer for damp surfaces before applying a top coat. Product Features: - Resists industrial chemicals - Applies with brush or roller - Bonds to damp surfaces - Applies at temperatures as low as 40°F

Rubber-toughened, high viscosity, structural adhesive with superior impact, peel and fatigue resistance. Intended Use: - Bonds metals, thermoset plastics and structural parts. Product Features: - Non-shrinking - High dielectric strength - Excellent durability and flexibility

An aluminum-filled, 1:1 mix epoxy packaged in 6 1/2 oz. tube kit for repairs to copper coils in HVAC equipment. Intended Use: - Seal leaks in pipes and tanks; repair copper coils in compressors; repair holes in aluminum and other metals Product Features: - Fills voids or pores in castings - Bonds, patches, and seals metals - Good stability in Freon Environment - Bonds to aluminum, concrete, and many other metals - Aids in quickly returning equipment back to service - Hardens to a rigid material that can be ground, drilled, or tapped

A high-performance, fast-curing 100% solids epoxy for emergency repairs to stainless steel, equipment that needs good chemical resistance. Intended Use: - Repair breakers and transformers in an emergency; patch holes and leaks in coal fuel lines; repair cracks in housing and pipes; rebuild keyways and treads Product Features: - Can be applied in temperatures as low as 40°F - Full cure in 6 hours - Easy to use 1:1 formula - Sets up in 5 minutes

A 2-component, heavy-duty epoxy compound containing silicon carbide granules for anti-skid protection Intended Use: - Ideal anti-skid coating used in walkways; ramps; loading docks, and stairs. Product Features: - Applies at temperatures as low as 40°F - Reduces slipping accidents - Adheres to concrete, wood, steel, brick, aluminum, and wet surfaces - Bonds to damp surfaces - Non-corrosive hardener

A fast-curing, concrete patching compound that bonds to concrete, brick, masonry, metal, or wood and returns repair area to service in three hours. Intended Use: - Fast curing repairs to concrete floors where you need to have medium to heavy traffic on the floor in 3 hours. Used to repair expansion joints which have been damaged by forklift traffic. Used to anchor metal rails in concrete. Product Features: - Bonds to damp surfaces - Easily troweled to 1/4" or more - Applies on cold or damp surfaces (with primer)

Self leveling, filled epoxy system for repairing heavily spalled concrete floors. Intended Use: - For repairing heavily spalled, fragmented concrete floors. - A minimum thickness of 0.25" is recommended. Product Features: - Self-leveling - Bonds to metal and concrete - Low shrinkage - Resists industrial chemicals - Mixes easily

All-purpose concrete patching compound that bonds to concrete, brick, masonry, metal, or wood surfaces. Intended Use: - Ideal for patching concrete, brick, masonry, floors, or retaining walls where the concrete has spalled. The material will also bond to wood and metal. Can be used to anchor bolts in concrete. Product Features: - Easy to mix and apply - Trowelable to 1/4" or more - High compressive strength - Resistant to water, oils, solvents, and alkalis