聚乙烯 (PE): PE,未指定
产品 | 可用性 | 产品说明 |
---|---|---|
Casico™ FR6082 | 北美洲 |
Casico FR6082 is a thermoplastic, reduced fire hazard, zero halogen black jacketing compound combined with high mechanical strength, toughness and excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%.
Casico FR6082 contains 2,5% well dispersed furnace black of nominal particle size less than 25 nanometres in order to ensure excellent weathering resistance.
Applications
Casico FR6082 is designed for:
- Jacket for energy cables
The principle feature of this compound is the high physical strength and toughness. It can be used in areas sensitive to smoke or corrosive and toxic combustion products. For most cable constructions, Casico FR6082 has sufficient flame retardancy to satisfy single wire vertical burning tests.
Specifications
Casico FR6082 meets the applicable requirements below using sound commercial extrusion practice and testing procedures:
- ISO 1872-PE, KCGH, 33-D003
- ASTM D1248 Type II Class C, Cat 4
The following cable material standards are met by Casico FR6082:
- EN 50290-2-27
- EN 50363-8 TM7
- VDE 0207 Teil 24 (HM2, HM4 & HM5)
- BS 7655 LTS1-4
Cables manufactured with Casico FR6082 using sound extrusion practice normally comply with the following cable product standards:
- IEC 60502, Part 1, Type ST3, ST7
- IEC 60502, Part 2, Type ST3, ST7
- HD 620 S1, DMZ2
- HD 632 S1, ST3, ST7
- HD 603 S1 DMO 1
- HD 620 S2 DMZ 2-5
Special features
Casico FR6082 consists of specially selected components to offer:
- High mechanical strength and toughness
- Superb system ageing compatibility
- Low water permeability
- UV resistance
- Possibility for cable downsizing
- Processability on most PVC/PE extrusion equipment
- No need for pre-drying normally
- Excellent processing properties
|
CERTENE™ PE 30000 | 北美洲 | |
Clearflex™ SH 12 | 北美洲 |
Clearflex SH 12 is an innovative compound made by polyethylene and polymers having elastomeric properties suitable for multilayer blown film extrusion.
Thanks to its macromolecular structure, Clearflex SH 12 allows to obtain films that reach transverse deformations over 160% maintaining an optimal elastic memory, excellent puncture resistance and good transparency.
Application
Clearflex SH12 has been designed for the stretch hood production.
Clearflex SH 12 is used in the core layer of multilayer films, it can provide innovative and sustainable solutions for a wide range of applications including: beverage packaging, electrical appliances of all sizes, construction materials, bags of cement and fertilizers.
|
Delta PER-3G20 | 北美洲 | |
Delta PER-3G40 | 北美洲 | |
Delta PER-3G60 | 北美洲 | |
DENSETEC® Post Consumer | 北美洲 | |
DENSETEC® SHIELD | 北美洲 | |
DFDK-6010 BK | 欧洲 |
DOW™ Electrical & Telecommunications DFDK-6010 BK 是一种炭黑填充的母料,含有防老化稳定剂,专为与陶氏聚乙烯树脂配套使用用于黑色电信、电力和光纤电缆的制造。为了在护套成品中达成2.6%的炭黑水平,DOW™ Electrical & Telecommunications DFDK-6010 BK的加入量应该在6.2%。
在以上建议的炭黑含量水平时,DOW™ Electrical & Telecommunications DFDK-6010 BK 可为电信、电力和光纤电缆带来优异的紫外线防护功能,满足这些电缆对材料分散的要求。
加工工艺:
应该按照正确的配比,将DFDK-6010 BK 炭黑母料和所选用的陶氏聚乙烯树脂均匀地加入挤出机料斗,以确保制得的成品的各个部分均含有2.6%的炭黑含量。根据所选用的基础树脂来决定适宜的熔融挤出温度。
|
Dow ENDURANCE™ HFDA-0100 BK | 北美洲 |
DOW HFDA-0100 BK is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW HFDA-0100 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper and aluminum conductors.
Specifications:
DOW HFDA-0100 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW HFDA-0100 BK, prepared using sound commercial fabrication practice, meets the following specifications:
- IEC 60502-02
- BS 7870-4.10
(1) DOW HFDA-0100 BK EXP3 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulation such as EPR and EPDM's, the user is cautioned to establish the utility of DOW HFDA-0100 BK with each formulation.
|
DOWLEX™ 2689G | 北美洲 |
DOWLEX™ 2689G Polyethylene Resin is an ethylene-octene copolymer produced via INSITE™ Technology from Dow.
Main Characteristics:
- HDPE with excellent stiffness and processibility
Complies with:
- U.S. FDA 21 CFR 177.1520 (c) 3.1a
- EU, No 10/2011
Consult the regulations for complete details.
|
DOWLEX™ GM 6047G | 拉丁美洲 |
DOWLEX GM 6047G Polyethylene Resin is a cast film polyethylene medium density resin designed to improve processing and performance for both breathable and non-breathable backsheet resins in hygiene applications.
Main Characteristics
- Linear Low Density Polyethylene
- Improved processability for cast film
- High modulus for downgauged applications
- Complies with U.S. FDA 21 CFR 177.1520(c) 3.2a
- Complies with European Commission EU No 10/2011
- Consult the regulations for complete details.
|
DOW™ DGDA-5311 NT | 北美洲 |
DOW™ DGDA-5311 is a Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown or Cast film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment. Utilizing higher density MDPE gives DGDA-5311 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes.
Principle Characteristics:
- Resin designed for geomembranes
- Excellent processability in high thickness
- Excellent ESCR and oxidation resistance
|
DynaMix™ 430-S | 北美洲 |
Masterbatch containing 30% of vegetable based Stearamide dispersed in a polyethylene resin. DynaMix 430-S was designed for use in polyethylene and compatible systems. Other loading levels are available upon request.
Features:
- Increased Hydrophobicity
- Improved Processability
- Lower Surface COF
- Greater Mar and Abrasion Resistance
- Increased Softness
Applications
- Films
- Woven and Non-Woven Fibers
- Injection Molded Parts
|
DynaPath™ 267NL | 北美洲 |
Conductive PE
Features:
- Conductive
- Good Dimensional Stability
- Excellent Processability
Applications:
- Aerospace
- Industrial
- Electrical/Electronic Applications
|
DynaPath™ 435XLPE | 北美洲 |
Conductive Crosslinked PE
Features:
- Conductive
- Excellent Chemical Resistance
- Low Temperature Properties
- Halogen Free
- Crosslinkable
- Good Processability
Applications:
- Automotive
- Industrial
- Wire and Cable Applications
|
DynaStat® 247 | 北美洲 |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 257 | 北美洲 |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 257M2 | 北美洲 |
Antistatic Polyethylene Compound
Features:
- Low Warpage
- Good Dimensional Stability
- Excellent Processability
Applications:
- Automotive
- Industrial
- Electrical/Electronic Applications
|
DynaStat® 457 | 北美洲 |
Antistatic Polyethylene Compound
Features:
- Permanently Antistatic
- Good Dimensional Stability
- Excellent Processability
Applications:
- Packaging
- Industrial
- Electrical/Electronic Applications
|
EcoForte® FR PE 40 01 | 欧洲 |
Halogen free flame retardant PE
ATH based
|
EcoForte® FR PE 40 02 | 欧洲 |
Halogen free flame retardant PE
MDH based
|
EcoForte® PF PE 25 01 | 欧洲 |
Peel compound PE
|
ECOmpoundS® KR7121 | 欧洲 | |
EEC LLD 3505 U | 非洲和中东 | |
EEC MD 3804 U | 非洲和中东 | |
EEC MD 3904 U | 非洲和中东 | |
Egyeuroptene RG10 PE | 非洲和中东 |
Egyeuroptene RG10 PE is a Polyethylene colored powder, designed for Rotational molded items: General rotomoulding applications.
|
ELTEX® TUB220-RT | 欧洲 |
Eltex® TUB220-RT is a natural polyethylene resin meeting Type II PE-RT (Polyethylene of Raised Temperature Resistance) requirements according to EN ISO 24033.
Eltex® TUB220-RT provides a step-out performance with a unique combination of properties between mechanical performance at elevated temperature, pipe flexibility and superior processing behaviour.
This PE-RT type II material is well suited for both monolayer and multilayer plastic or metal composite pipes
Applications
- Underfloor and wall heating & cooling
- Industrial pipes and fittings
|
Favorite A100 | 北美洲 | |
Favorite A101 | 北美洲 | |
Favorite A170 | 北美洲 | |
Favorite A180 | 北美洲 | |
Favorite A190 | 北美洲 | |
Favorite A401 | 北美洲 | |
Favorite MDLLN | 北美洲 | |
Favorite REG100 | 北美洲 | |
Favorite REG101 | 北美洲 | |
Favorite REG200 | 北美洲 | |
Favorite REG235 | 北美洲 |