Adhesive Resin for Aluminum Plastic Composite Panel(ACP) Adhesive resin Lushan series for Aluminum-plastic Composite Panel (ACP) provide required bonding strength between aluminum and the high filled polyethylene core. The sandwich structure of Aluminum-plastic Composite Panel (ACP) offers a high quality, light weight and good looking siding solution for modern architecture. With the development of social economy, people are greatly concentrated with safe, healthy and sanitary living environment. 5-layer sandwich panels(Aluminum-Plastic Composite Panels) are more and more popular in modern building and construction. Adhesive resin Lushan series for Aluminum-plastic Composite Panel (ACP) is more and more widely used to meet with peoples requirements for a high qualified composite materials.

Adhesive Resin for Aluminum Plastic Composite Panel(ACP) Adhesive resin Lushan series for Aluminum-plastic Composite Panel (ACP) provide required bonding strength between aluminum and the high filled polyethylene core. The sandwich structure of Aluminum-plastic Composite Panel (ACP) offers a high quality, light weight and good looking siding solution for modern architecture. With the development of social economy, people are greatly concentrated with safe, healthy and sanitary living environment. 5-layer sandwich panels(Aluminum-Plastic Composite Panels) are more and more popular in modern building and construction. Adhesive resin Lushan series for Aluminum-plastic Composite Panel (ACP) is more and more widely used to meet with peoples requirements for a high qualified composite materials.

Description LUTENE FB3000 is mainly intended for the extrusion of blown film with high mechanical property for the clarity bags in all thickness. LUTENE FB3000 have high mechanical property and enables the production of very thin, clear, glossy film. (LUTENE FB3000 contains slip agent and antiblock agent.) Main Applications Clarity bags in all thicknesses, film for automatic packaging, packing of textiles, lightweight carrier bags, shrink film for packing, film for lamination

Description LUTENE® XL2700BK TR was specially designed cross-linkable semi-conductive compound for easy strippable insulation shielding of medium and high voltage power cable. LUTENE® XL2700BK TR provides an excellent stripping property, lower and consistent stripping force over a wide temperature range without tearing, leaving a clean insulation surface. LUTENE® XL2700BK TR is recommended for use in conjunction with XL8080NTS (Cross-linked polyethylene compound) and XL8080TR (Tree-retardant cross-linked polyethylene compound). Applications Cross-linkable, easy strippable semi-conductive insulation shielding compound for medium voltage power cables with rated voltage up to 35kV Characteristics - Excellent Surface Smoothness - Excellent Electrical Properties - Outstanding Strippability Specification - AEIC CS8 - ICEA S-94-649, S-93-639 / NEMA WC74 - IEC 60502 - CENELEC HD620 - BS 6622

Description LUTENE® XL2700BK has excellent strippability, processability for medium voltage power cables. Applications Easy strippable insulation shielding compound for medium voltage power cables with rated voltage up to 35kV Characteristics The advantage of LUTENE® XL2700BK over conventional strippable insulation shield compounds include: - Consistent, clean adhesion level over -40 to 70°C temperature range. - Excellent extruded surface smoothness with fewer and smaller surface protrusions over broad range of shear rates. Specification LUTENE® XL2700BK meets the property requirement of the following material specifications. - AEIC CS8 - ICEA S-94-649 - IEC 60502 - BS 6622

MAJ'ECO CEP204EW is a vegetal fibre polyethylene compound intended for injection moulding. MAJ'ECO CEP204EW has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as: - Boxes - Bottles - Racks - Technical components...

MAJ'ECO DP290MBSE is a vegetal fibre polyethylene compound intended for injection moulding and extrusion. MAJ'ECO DP290MBSE has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as: - Boxes - Profiles - Racks - Technical components...

MAJ'ECO FP204ECEL is a vegetal fibre polyethylene compound intended for injection moulding. MAJ'ECO FP204ECEL has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as: - Boxes - Bottles - Racks - Technical components...

MARPOL® HDP PE100 is a bimodal polyethylene resin to be used for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is needed. Thisresin has excellent processability for the full range of pipe sizes and wall thicknesses to include heavy wall pipe. Recommended Applications: Natural gas distribution pipes, large diameter industrial piping, mining, sewage and municipal water service lines

Fractional Flow Material

Avient's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products. Benefits of LFT compounds include improved impact strength, elastic modulus, and material strength across wide temperature ranges from subambient to highly elevated. Furthermore, LFT compounds have been shown to offer improved performance in the areas of creep and fatigue performance, improved dimensional stability, and exhibit an exceptional surface finish when compared to traditional highly filled short fiber products.

OREVAC® 18910 is a maleic anhydride modified linear low-density polyethylene available in pellet form. It can be processed on most extrusion equipments designed to process conventional polyolefins. Applications OREVAC® 18910 has been designed to develop a reliable bonding strength between PS, PE, EVOH and PA in coextruded multi-layer structures like films or sheets.

OREVAC® OE850 is a maleic anhydride modified polyethylene adhesive resin. It is available in pellet form for use in conventional extrusion and coextrusion equipments designed to process polyethylene (PE) resins. Applications OREVAC® OE850 is a versatile adhesive for extrusion coating or lamination, specifically designed to be used as concentrate in dry blend with LDPE. OREVAC® OE850 improves adhesion of LDPE on aluminum foils, metallized or primerized films. It is typically used at 20-40% in LDPE designed for extrusion coating.

PE Natural 50% Mineral filled

Petrothene LB500301 is a polyethylene resin that exhibits excellent environmental stress crack resistance and is selected by customers for use in heavy duty bottles, such as those containing detergent and chemicals.

Silane crosslinkable polyethylene for low voltage power cable insulation SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal ageing is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.

Silane crosslinkable polyethylene for medium voltage power cable insulation SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been specifically developed for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

Silane crosslinkable polyethylene for medium voltage power cable insulation SX409NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409NT:CM401 system has been specifically developed for cables operating up to 36kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

Silane crosslinkable polyethylene for low voltage power cable insulation SX522A pre-grafted base is mixed with crosslinking catalyst masterbatch CM401 in the ratio 95:5. This system has ambient cure.

Silane crosslinkable polyethylene for low voltage power cable insulation SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been especially developed for usage on overhead power cables insulation according NFC 33-209, "Câble Torsadé". Crosslinking is obtained by exposure to moist or hot water immersion only.

Silane crosslinkable polyethylene, 125°C rated, for low voltage power cable insulation SX546 pre-grafted base is mixed with crosslinking catalyst masterbatch CM493CD, for small cross sections, or CM497CD, in the ratio 95:5, for a 125°C working temperature system. This system has ambient cure.

Silane crosslinkable polyethylene for high temperature pressure pipes SX720 is a silane grafted polyethylene compound, curable by exposure to moist conditions, and possessing good extrusion properties at high output rates. The graft component SX720 is mixed with a crosslinking catalyst masterbatch CM488 generally in the ratio 95:5. The highly crosslinked materials produced by this two-component system possess excellent impact strength, ESCR, creep and internal pressure resistance under ambient and elevated temperature conditions. These materials have been formulated for hot and cold water pressure pipes and are easily extrudable on conventional polyethylene extrusion lines.

Plexar tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, EVA, EMA, polypropylene, polyamide (nylon), ethylene vinyl alcohol copolymers (EVOH), ionomer and other sealants, polyethylene terephthalate (PET) resins and copolymers, styrenic polymers, metal, and paperboard. Product grades primarily used for blown and cast films, sheet and thermoforming, blow molding, extrusion coating and lamination, tubing, pipe, and other specialty applications are available in pellet form. Contact your Plexar sales and/or Equistar technical service representative for more information and specific recommendations for your application(s).

Plexar tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, EVA, EMA, polypropylene, polyamide (nylon), ethylene vinyl alcohol copolymers (EVOH), ionomer and other sealants, polyethylene terephthalate (PET) resins and copolymers, styrenic polymers, metal, and paperboard. Product grades primarily used for blown and cast films, sheet and thermoforming, blow molding, extrusion coating and lamination, tubing, pipe, and other specialty applications are available in pellet form. Contact your Plexar sales and/or Equistar technical service representative for more information and specific recommendations for your application(s).

Plexar tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, EVA, EMA, polypropylene, polyamide (nylon), ethylene vinyl alcohol copolymers (EVOH), ionomer and other sealants, polyethylene terephthalate (PET) resins and copolymers, styrenic polymers, metal, and paperboard. Product grades primarily used for blown and cast films, sheet and thermoforming, blow molding, extrusion coating and lamination, tubing, pipe, and other specialty applications are available in pellet form. Contact your Plexar sales and/or Equistar technical service representative for more information and specific recommendations for your application(s).

Flame retardant PE-HD compound (UL 94 V-2) without PBDE

PolyFR® 201 is a highly loaded non-halogen flame retardant concentrate pellet designed for ease of use in polyethylene resin compounding and molding processes where FR levels can be metered in to meet various flame retardant standards for the product. The concentrate incorporates our high performance JJAZZ® intumescent flame retardant system. PolyFR®201 utilizes a prime 20 melt LLDPE as its binder resin for ease of processing andincorporating into a variety of polyethylene resins in final compounding and molding applications. It is recommended at loading levels from 35-50% depending on the resin systems, material thickness, equipment, formulation additives and final flame retardancy requirements. It is recyclable.

GE200C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material(PA, metal, inorganic matter, etc.) and a polyethylene. GE200C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE270C is a polyethylene based compatibilizer containing anhydride functionality. It is available inpellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.) and a polyethylene. GE270C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE300C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.)and a polyethylene. GE300C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

GE400C is a polyethylene based compatibilizer containing anhydride functionality. It is available in pellet form and designed for use in conjunction with a polar material (G/F, metal, Wood, inorganic matter, etc.) and a polyethylene. GE400C has high physical properties originated from polyethylene and shows excellent adhesion strength and processibility.

HB520 is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co- extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. HB520 is developed for polyamide (Nylon) based barrier film. HB520 is suitable for multi-layer blown film. Based on HDPE, this adhesive is used for the tie layer between PE and barrier materials.

LE102T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in co-extrudable aluminum composite pipe & panel manufacturing system. LE102T has high physical properties originated from LLDPE and shows excellent adhesion strength and processibility. Together with XLPE, HDPE and PE-RT, LE102T exhibits superior bond strength with various aluminum substrate and shows high stability with long-term thermo-cyclic test .

LE130A is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co-extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. LE130A is developed for ethylene vinyl alcohol (EVOH) or polyamide (Nylon) based barrier film. LE130A is suitable for multi-layer blown film. Based on LLDPE, this adhesive is used for the tie layer between PE and barrier materials.

LE200T is a polyethylene based adhesive polymer containing anhydride functionality. It is available in pellet form and designed for use in 3-layer pipe coating systems in conjunction with an epoxy primer and a thick polyethylene top-coat. LE200T has high physical properties originated from LLDPE and shows excellent processability during 3-layer pipe coating operation. Together with Yuclair ET509B (Black compounded top coat) and commercially available epoxy primer, LE200T shows highly adjusted pipe coating system available for all pipe coating specification including DIN30670, CSA Z425.21-02, NFA 49-710.

PL108NT-I is Natural , Low Friction POLYETHYLENE, Extrusion,Cables & Wires Applications