PL2001NT is Natural , Low Friction POLYETHYLENE, Extrusion,Injection Molding Applications such as: Silicone core pipe,PE plastic sheets,Packaging boxes

PL300G2NT-2 is Natural, 10% Glass Fiber POLYETHYLENE, Injection Molding,Automotive Applications

PL300G8NT is Natural, 40% Glass Fiber Reinforced POLYETHYLENE, Extrusion & Injection Molding Applications This product is food contact standards compliant.

Cling MB Description POOYATAK CG203 is a PE based master batch containing a tackifying resin is used as a cling agent. It can be used in LLDPE or LDPE based stretch wrap and cling wrap films for pallet wrapping, silage wrapping and food packaging whether by blown or cast processing. The agent migrates to the film surface within 24 to 72 hours and exhibits the cling properties by then. There must neither be any slip or antiblock agent in the film base resin nor as masterbatch in the formulas. Application POOYATAK CG203 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the film thickness (the thicker film needs less addition level), process (the blown process needs double dosage), film cooling temperature (higher cooling temperature needs more level) and the final application it can be used from 2 to 10%. It should be stored in a dry and cool place not to exceed 6 month.

Clarifying MB Description POYAD CR207I is an advanced performance nucleating/clarifying masterbatch based on polyethylene. This product is designed to efficiently increase the rate of crystallization to yield finished articles with excellent mechanical and optical properties include increased transparency, gloss and tensile modulus in HD/LLDPE film, sheet and molding applications. It can also improve injection molding cycle times. Application POYAD CR207I is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 1 to 3% in HDPE and/or LLDPE film, sheet and injected parts. POYAD CR207I should be stored in a cool and dry place not to exceed 12 months.

Slip / Anti-block MB Description POYAD SB231 is a PE based master batch containing a blend of a migration slip agent and a special anti block agent. It's designed for use in manufacturing of cast and blown PE film where the end product requires slip and anti-block characteristics. The slip additive migrates to the film surface relatively slowly, thus reducing potential problems during sealing and printing. Due to its specialized anti-block it has almost no effect on haze and gloss. It shouldn't be used in cling film formulation. Application POYAD SB231 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the film thickness (the thicker film needs less addition level), cooling condition, application and existence of other additives it can be used from 0.8 to 2%. It should be stored in a dry and cool place not to exceed 6 month.

Whitening MB Description POYAD WA202 is an advanced performance PE based fluorescent whitening master batch is designed to enhance brilliancy or to mask yellowness of plastic articles specially increase the brightness of the final product. Due to its high compatibility with polyolefines, proper heat resistance and light fastness it's the best choice to improve appearance of the product. It can be used in PE film (specially in case of using recycle material), PE and PP bottle and injected parts. Application POYAD WA202 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application it can be used from 0.4 to 1%.

PRE-ELEC® PE 14708GF is a conductive thermoplastic compound based on glass-fibre reinforced polyethylene. Conductivity is achieved by using a special conductive carbon black. In addition to a low electrical resistivity it has a good balance of mechanical properties and is easy to injection mould.

PRE-ELEC® PE 18480 is a conductive flexible thermoplastic compound based on polyethylene with good low temperature properties. The conductivity is achieved by using a special conductive carbon black. In addition to a low electrical resistivity, the product has excellent mechanical properties and is easy to extrude.

PRE-ELEC® PE 19739 is a conductive thermoplastic adhesive compound based on PE. The grade has good adhesion to aluminium and copper. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity it has a balance of mechanical properties and is easy to extrude. It can be used as adhesive layer between PE and metal surface.

Propak 4042 UV is a 15% talc filled PE100 type product. It has been developed for mouldings requiring long term exposure to potable water at varying temperatures and pressures. It has been UV stabilised for outdoor applications.

PTFA 05 is an innovative development in the quest to replace PVC compounds. It is a halogen-free, environmentally-friendly, flame-retarded compound which has already been selected for profile extrusions (e.g. windows and electrical conduits) and blow moulding (e.g. plastic chairs). These fabrication processes require melt strengths and elasticities which, until now, only PVC compounds or non-flame-retarded polyolefins could supply. Through careful formulation, PTFA 05 meets these requirements, and more, and without a hint of halogen. Articles made from this compound will meet the environmental criteria of both the WEEE and ROHS Directives, as PTFA 05 is 100% environmentally-friendly.

Purgex™ 3056 Plus Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene, and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - Designed for color and/or material changes on engineering resins plus efficient cleaning of hot runner systems, Purgex™ 3056 Plus has proven versatility on a wide range of resins. - Engineered for rapid turnaround on color and material changes. Efficiently removes residual contamination. - Effectively cleans the barrel, screw, check ring, as well as hot runner systems and is safely processed through hot runner gates as small as .030-inch (0.75mm). - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). ? Active components in Purgex™ 3056 Plus neutralize acid gases generated by PVC. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Purgex™ 3057 Plus Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene, viscosity modifier and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - Created for more challenging color and/or material changes in engineering resins plus efficient cleaning of hot runner systems, Purgex™ 3057 Plus has the proven ability to clean low- to mid-range mineral- and glass-filled resins. - Designed for rapid turnaround on color and material changes. Efficiently removes residual contamination. - Purgex™ 3057 Plus effectively cleans a wide range of resins from commodity to engineering grades. ? Effectively cleans the barrel, screw, check ring, as well as hot runner systems and is safely processed through hot runner gates as small as .030-inch (0.75mm). - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). - Active components in Purgex™ 3057 Plus neutralize acid gases generated by PVC. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Purgex™ 456 Plus Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene, and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - General purpose purging compound for color and/or material changes plus efficient cleaning of hot runner systems, Purgex™ 456 Plus has proven to be versatile and effective on a wide range of resins. - Engineered for rapid turnaround on color and material changes. Efficiently removes residual contamination. - Effectively cleans the barrel, screw, check ring, as well as hot runner systems and is safely processed through hot runner gates as small as .030-inch (0.75mm). - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). - Active components in Purgex™ 456 Plus neutralize acid gases generated by PVC. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Purgex™ 457 Plus Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene, viscosity modifier and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - Created for more challenging color and/or material changes plus efficient cleaning of hot runner systems, Purgex™ 457 Plus has proven to perform particularly well in removing low- to mid-range mineral- and glass-filled resins. - Engineered for rapid turnaround on color and material changes. Efficiently removes residual contamination. - Effectively cleans the barrel, screw, check ring, as well as hot runner systems and is safely processed through hot runner gates as small as .030-inch (0.75mm). - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). ? Active components in Purgex™ 457 Plus neutralize acid gases generated by PVC. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Purgex™ 459 Plus Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene, viscosity modifier and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - Specifically created for automotive interior applications, Purgex™ 459 Plus has proven its effectiveness with challenging dark-to-light color changes and efficient cleaning of hot runner systems. Additionally, Purgex™ 459 Plus is versatile and is effective on a wide variety of resins. - Engineered for rapid turnaround on color and material changes. Efficiently removes residual contamination. - Effectively cleans the barrel, screw, check ring, as well as hot runner systems and is safely processed through hot runner gates as small as .030-inch (0.75mm). - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). - Active components in Purgex™ 459 Plus neutralize acid gases generated by PVC. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Purgex™ 461 Commercial Purging Compound is a ready-to-use blend consisting of active ingredients with a polyethylene carrier. Purgex™ products have mechanical activity for efficient cleaning, foaming action for enhanced mixing and a lubricant for easy removal. Purgex™ thoroughly and safely cleans injection molding machines and hot runner systems. All active ingredients in Purgex™ are Generally Recognized As Safe (GRAS) by the US FDA. Physical Description: - Blend, polyethylene and an FDA-approved active component - Non-toxic, non-abrasive, and safe - Ready to use and easy to remove Features & Benefits: - Designed for blown film applications, Purgex™ 461 cleans the extruder, screen pack housing and die/manifold, removing all types of contamination and improving overall film appearance. - Effective for frequent purging schedules. - May be used in certain extrusion lines without removing the screen pack. - Thorough cleaning of melt pumps and is safely processed through dies as small as .030-inch (0.75mm). - Efficient removal of compostable and biodegradable resins. - With regular use, Purgex™ forms a temporary barrier which protects steel surfaces from oxidation, extending the cleaning process.

Description Purpolen® PE is a grey polyethylene post-consumer recyclate supplied in pellets. Purpolen® PE is ideal PE used where sustainability and circularity matter. Purpolen® PE is a post-consumer recyclate including a large part of recycled post-consumer waste coming from pre-sorted municipality waste. Purpolen® PE is part of EuCertPlast certificate according to European Standard EN15343:2007 (certificate available upon request). It is not intended for use in beverages, drinking water contact, food contact, medical, pharmaceutical or healthcare applications. - Homogenised 24 tonne- truckloads - Pellet shape: cylindrical - Pore size of filter: 180 µm CAS-No. 9002-88-4 Applications Extrusion applications Special Features - Good impact - Good demoulding properties

RAMOFIN PL4001NT is Natural, 20% PTFE , Low Friction POLYETHYLENE, Injection Molding,Constraction Applications

RAMOFIN PPH106 is Natural , Low Friction POLYPROPYLENE, Injection Molding Applications

REDI-LINK™ PE is a two component moisture curable crosslinkable system for use in low voltage power cable applications. DFDA-5440 Natural, with a density of 0.922, may be crosslinked after extruding with the DFDA-5430 Natural catalyst masterbatch, with a density of 0.921, in a 50:50 ratio and then allowing moisture to diffuse into the insulation. If a black product is required, the addition of DFDB-5410 Black 55 carbon black masterbatch to DFDA-5430 Natural and DFDA-5440 Natural is recommended. Specifications: When DFDA-5440 Natural is crosslinked with DFDA-5430 Natural and optionally, DFDB-5410 Black 55, it meets typical low voltage specifications such as those found in: - IEC-60502 - GB 12706-91 - IS 7098 - 1988

Relene P4609 is a natural color grade for pipe extrusion. It possesses broad molecular weight distribution balancing processability and mechanical properties. This grade meets MFI and Density requirements of Material as per IS 4984:2016 for 'Polyethylene pipes for Water Supply - Specification'. The grade has good ESCR properties and suitable for blow molding applications also.

Revolve M-505 is a fully formulated wide specification black, designed for general purpose applications. This product does not contain reclaimed rotomoulded materials.

Revolve M-532 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-56 is part of a new generation of rotational moulding foam grade which has been designed to give outstanding rigidity and closed cell. Suitable for use in single, double and triple layer applications with any PE grade supplied by Matrix. For processing guidelines please contact one of our representatives in your area.

Revolve M-574 is a rotational moulding polyethylene general purpose grade designed to provide conductivity and still maintain wide processing window, excellent mouldability and good impact strength.

Revolve M-583 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-594 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-601 is a Super-Linear rotational moulding grade designed to provide high stiffness without compromising impact properties and toughness which makes the grade ideal for any leisure marine products like kayaks, canoes and boat. The grade is suitable for multi-layer application in combination with any Matrix foam.

Revolve M-638 is a rotational moulding polyethylene black grade. It has been designed to provide good flow characteristics and medium stiffness without compromising impact properties. It is advisable to use this grade for general purpose applications.

Revolve M-644 is a fully formulated rotational moulding foam grade which has been designed to give a soft, flexible foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-649 is a fully formulated rotomoulding grade which contains a new formulation Flame Retardant additive designed to give much improved weatherability and whiter Natural colour. The grade also has been designed to give increased stiffness. Classified according to UL94 V-2 @ 3mm.

Revolve M-681 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-686 is a fully formulated rotomoulding resin especially suitable for large tank applications. Additionally this grade carries WRC approval for potable water applications (Cert No. 0311501) and it is designed to meet the requirements of BS4213. It has a high (2% min) carbon black content for extra UV stability and opacity.

Revolve M-711 is a rotational moulding polyethylene general purpose grade designed to provide antistatic properties and still maintain wide processing window, excellent mouldability and good impact strength. The grade is suitable for food contact applications.

Revolve M-716 is a rotational moulding polyethylene general purpose grade designed to provide conductivity and still maintain wide processing window, excellent mouldability and good impact strength. The grade is suitable for food contact applications.

Revolve M-719 is a fully formulated black rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-721 is a fully formulated black rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-732 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)