Revolve M-736 is a rotational moulding grade designed to provide an excellent combination of physical properties such as impact strength, stiffness, flow characteristics. This makes the grade suitable for applications where hardness resistance and high stiffness is required.

Revolve M-748 is a rotational moulding hexene polyethylene black grade designed to provide stiffness and mouldability without compromising impact resistance. The grade is suitable for large water and diesel tank applications. The grades carries TÜV and WRAS approvals.

Revolve M-760 is a Super-Linear rotational moulding grade designed to provide excellent stiffness without compromising impact properties and toughness which makes the grade ideal for any leisure marine products like kayaks, canoes and boat. The grade is suitable for for multi-layer applications in combination with any Matrix foam.

Revolve M-762 is a fully formulated black rotomoulding resin suitable in applications where stiffness is a requirement. This grade presents excellent stiffness, good impact strength and toughness.

Revolve M-765 is a fully formulated rotational moulding foam grade which has been designed to give a soft, flexible foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-772 is a fully formulated rotational moulding foam grade which has been designed to give a soft, flexible foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve M-776 is a rotational moulding polyethylene black grade. It has been designed to provide good flow characteristics and medium stiffness without compromising impact properties. It is advisable to use this grade for general purpose applications.

Revolve M-794 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)

Revolve N-109 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, good flow characteristics without compromising impact strength.

Revolve N-131 is a Super-Linear rotational moulding grade designed to provide high stiffness without compromising impact properties which makes the grade ideal for any leisure marine products. The grade is suitable for multi-layer applications in combination with foam.

Revolve N-250 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised and it is the base of all standard colours and mottle effects.

Revolve n-259 is a fully formulated black rotomoulding resin suitable in applications where stiffness is a requirement. This grade presents excellent stiffness, good impact strength and toughness.

Revolve N-261 is a rotational moulding polyethylene butene grade. It has been designed to provide good flow characteristics without compromising impact properties.

Revolve N-264 is a rotomoulding high density polyethylene resin which has good mouldability, impact strength and is fully UV stabilised.

Revolve N-265 is a fully formulated rotational moulding grade especially suitable for general purpose applications where extra impact strength is required. This grade is ideal for applications such as small tanks and other "industrial" items. This grade is also suitable for ESCR and chemical resistance applications.

Revolve N-270 is a fully formulated rotomoulding grade designed for general purpose applications and small tanks. The resin has medium stiffness, good impact strength, ductility and mouldability.

Revolve N-461 is a rotational moulding polyethylene general purpose grade. It has been designed to provide wide processing window, excellent mouldability without compromising impact strength. The grade is UV8 stabilised.

Revolve xl400 is a rotational moulding cross-linkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to the superb chemical resistance. It is advisable to consult the MSDS before it is used.

Revolve xl400 is a rotational moulding cross-linkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to the superb chemical resistance. It is advisable to consult the MSDS before it is used.

ESD Protection - Electrically Conductive - Extrusion Grade - Preliminary Datasheet

Polyethylene 603 Black Offers this combination of properties: High density, Injection molding grades, Good chemical resistance

DFDA-5488 NT 是一种与DFDB-5451 NT乙烯-硅烷共聚物配套使用的、可快速固化的催化剂母料。DFDA-5488 NT 的配方中含有EEA 共聚物，而且不久将推出牌号为SI-LINK™ AC DFDA-5488 Natural 的可交联聚乙烯。 由于催化剂母料是与硅烷改性聚乙烯分别运输的，所以这些组分在保质期内非常稳定。只有在这两个组分熔融混配之后在接触湿分和一定的温度条件下才可发生交联反应。在与DFDB-5451 NT混配之后，DFDA-5488 NT具有优异的抗焦烧性能。 DFDA-5488 NT具有足够的抗氧剂含量，因此，这种混配体系具有令人满意的加工性能和产品性能稳定性。这种体系对于铜导管或者铝导管都非常有效。 DFDA-5488 NT的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

可交联、硅烷-乙烯共聚物，用于电力电缆绝缘材料 DFDB-5451 NT 是一种开发性的硅烷-乙烯共聚物，用于低于1kV的电力电缆和控制电缆的制造。DFDB-5451 NT 不久将上市销售，牌号为SI-LINK™ AC DFDB-5451 Natural 可交联聚乙烯。在与DFDA-5488 NT催化剂母料一同挤出，湿分扩散进入体系之后，DFDB-5451 NT可发生交联反应。如果需要黑色产品，建议将DFDB-5410 BK炭黑母料加入DFDB-5451 NT 和 DFDA-5488 NT。 由于催化剂母料和炭黑母料与DFDB-5451 NT是分别运输，所以各组分在保质期内均非常稳定。只有在组分的熔体混配并接触湿分和高温的条件下才能使整个体系发生交联反应。 规格 当使用DFDA-5488 NT与DFDB-5451 NT进行交联，或者选用DFDB-5410 BK与之交联时，其产品应该满足以下规格要求中对1kV以下低压电缆的要求： - UL: 854 - ICEA: S-66-524 - CSA: RW90 - IEC: 60502-1

DFDA-5445 BK 是一种阻燃的、炭黑填充的母料，与SI-LINK® PE 配套使用，用于需要满足UL-44 水平燃烧测试要求的大型电缆。这种产品可以在更粗的电缆上通过水平燃烧XHHW-2的要求。 规格 DFDA-5445 BK按照35%的比例与60% 的SI-LINK 可交联聚乙烯DFDA-5451 NT 和 5% 的DFDB-5480 NT 催化剂母料一同使用，用于2 AWG 或者更粗的导管。在这种比例时，UL-44 和UL-1571所规定的XHHW-2, RHW-2 和 RHH电缆规格以及UL-854 和 UL-1581所规定的地下进户线缆(USE-2)规格中要求的性能均可满足，这包括阻燃性能。DFDA-5445 BK浓度加大时，即使细至6 AWG 的线缆亦可满足水平燃烧测试要求。 DFDA-5445 BK 是一种高填充的、黑色阻燃母料，用于添加进标准的SI-LINK PE 挤出树脂 (DFDA-5451) 和催化剂(DFDB-5480) 湿致固化体系。DFDA-5445 BK 的柔软性使加入该组分的配方产品在多种线缆规格上均可满足水平燃烧测试的要求。一般情况下，添加了55% DFDA-5445 BK就可使细至 6 AWG的线缆通过水平燃烧测试；35%的添加量可以使细至2 AWG的线缆通过水平燃烧测试。可以根据所作制造的电缆规格和所选取的UL送样规格对配方进行优化以降低成本。诸如加工条件、固化程度和导管类型等因素均可能影响产品性能，所以必须由电缆制造商来决定其产品的最有配方。

用于SI-LINK聚乙烯材料的催化剂母料 DFDA-5481 Natural 是一种催化剂母料，用于更快速的固化。该产品与诸如SI-LINK™ 聚乙烯DFDA-5451 Natural之类的硅烷改性聚乙烯一同使用，以便催化材料的交联反应。由于催化剂母料是与硅烷改性聚乙烯分别运输的，所以这些组分在保质期内非常稳定。只有这两种组分在熔融混配之后才会发生交联反应。 在与DFDA-5451 Natural混配之后，DFDA-5481 Natural 具有优异的抗焦烧性能，DFDA-5481 Natural具有足够的抗氧剂含量，因此，这种双组份体系具有令人满意的加工性能和产品性能稳定性。这种双组份体系对于铜导管或者铝导管都非常有效。 DFDA-5481 Natural 的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

SI-LINK™ DFDB-5400 NT is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5425 and is moisture curable. The specific gravity of the system is 1.04. It is recommended for use in low voltage power cable and industrial cable applications. SI-LINK™ DFDB-5400 NT is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030 in. insulation wall thickness, at a 25% loading with 70% SI-LINK™ DFDA-5451 NT and 5% SI-LINK™ DFDB-5480 NT. UV resistance allowing the wire to be printed "SunRes" may be achieved with the addition of a UV stabilizer package. The formulation for such an additive is available upon request and the resulting product is bulletinized by UL as DFDB-5425 UV. For accelerated curing applications SI-LINK™ DFDB-5400 NT can be used in conjunction with SI-LINK™ AC DFDB-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ AC DFDA-5488 NT Polyethylene to form a flame retardant SI-LINK™ AC polyethylene insulation system. This system is recognized by UL as DFDB-5425 AC. It is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030" wall thickness, at a 25% loading with 70% SI-LINK™ DFDB-5451 NT and 5% SI-LINK™ AC DFDA-5488 NT. SPECIFICATIONS The DFDB-5425 systems are bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2. They are also suitable for CSA RW-90, and RWU-90 applications.

DFDB-5410 Black 是一种与SI-LINK™ PE配套使用的、炭黑填充的母料。这种炭黑母料专门用于需要优异的防紫外线功能以及需要将湿分吸收降低至最低水平的应用领域。 优点： 在应用于SI-LINK聚乙烯绝缘材料体系的时候，DFDB-5410 BK 具有优异的处理性和加工性能。 - 与加工商研讨配方，以减少用量 规格： 在与SI-LINK PE可交联聚乙烯一同使用的时候，DFDB-5410 Black中的炭黑具有防紫外线的功用。为了在制品中达成2.5% 的炭黑含量，DFDB-5410 Black的加入量应该在6.3%。 加工技术： 炭黑的高用量填充使得体系具有了固有的吸湿性，经过一段时间就会开始吸收湿分。尽管DFDB-5410 Black的包装已经经过了特殊设计亦减少湿分的渗入，为了达成最佳质量，建议将物料放置在料斗干燥期内，使用除湿空气，在140°-160°F (60°-70°C)下干燥4至6个小时。如有需要，可在进行干燥之前，将其与陶氏的DFDB-5480 Natural催化剂母料进行混配。

SI-LINK™ DFDB-5445 BK is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5445 BK and is moisture curable. The specific gravity of the system is 1.02. It is recommended for use in low voltage power cable and industrial cable applications. It is formulated to pass the UL-44 horizontal burn test on larger cables. SI-LINK™ DFDB-5445 BK, a highly filled black flame retardant master-batch, is intended to be used at a 35% concentration along with 60% SI-LINK Polyethylene DFDA-5451 NT and 5% SI-LINK DFDB-5480 NT Catalyst Master-batch on size #2 AWG conductors and larger. At this concentration the requirements for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 cables as defined by UL-44, UL-854 are satisfied. . SI-LINK™ DFDB-5445 BK offers flexibility in tailoring the formulation to meet the horizontal burn requirement on a range of cable sizes. At increased concentrations, SI-LINK™ DFDB-5445 BK has been shown to provide horizontal burn test compliance in smaller sizes. The economics of the formulation may be optimized for a particular application depending on the cable sizes produced and the UL submittal sizes selected. Such factors as processing conditions, degree of cure and type of conductor can affect the results, so cable manufacturers must determine the optimal formulations for their applications. Recommendations are available upon request. SPECIFICATIONS The SI-LINK™ DFDB-5445 BK system is bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2 on sizes 2 AWG and larger. It is suitable for CSA RW-90, and RWU-90 applications.

催化剂母料，用于SI-LINK聚乙烯材料 DFDB-5480 NT 是一种催化剂母料，与诸如Dow SI-LINK™聚乙烯DFDA-5451 NT在内的可湿致交联的乙烯-硅烷共聚物一同使用以提供交联反应所需要的催化剂。由于催化剂母料是与乙烯-硅烷共聚物分别运输的，所以这些组分在保质期内非常稳定。只有这两种绝缘材料组分在熔融混配，接触湿分之后才会发生交联反应。 DFDB-5480 NT 具有足够的抗氧剂含量，因此，这种绝缘材料体系具有优异的加工性能和产品性能。这种绝缘材料体系对于铜导管或者铝导管都非常有效。 DFDB-5480 NT 的推荐使用量大约为5% （重量比）。具体的用量水平取决于工艺和所采用加工条件。请就您的具体应用，联络您的陶氏销售代表或者技术代表以确定用量水平。

Advantages: - Exceptionally fast surface - More cost-effective than other low friction sheet products - Requires no messy surface coatings or spray-on lubricants - Non-absorbent - UV resistant - Can withstand sub-zero temperatures - FDA compliant - Superior flatness for easy cutting and installation - Weldable and formable - Good chemical resistance Applications: - Package chutes - Truck bed linings - Plow Shovels - Guides - Bumper or dock fenders - Conveyors - Material handling equipment - Agricultural and food processing components

Sinpolene MBB0051 is a polyethylene-based black masterbatch designed specifically for use in generally-purpose film, blow moulding, injection moulding and extrusion of polyolefins. Sinpolene MBB0051, has high pigment loading and thus offers high colouring value with good quality and performance. MBB0051 contains extender, which give anti-blocking properties. CHARACTERISTICS - Easy processing - Good dispersion - Minimal wear effect on processing equipment

Sinpolene MBB0061 is a polyethylene-based black masterbatch designed specifically for use in generally-purpose film, blow moulding, injection moulding and extrusion of polyolefins. Sinpolene MBB0061, has high pigment loading and thus offers high colouring value with superior quality and performance. MBB0061 contains extender, which give anti-blocking properties. CHARACTERISTICS - Easy processing - Very good dispersion - Minimal wear effect on processing equipment

Sinpolene MBB006LE is a polyethylene-based black masterbatch designed specifically for use in generally-purpose film, blow moulding, injection moulding and extrusion of polyolefins. Sinpolene MBB006LE, has high pigment loading and thus offers high colouring value with superior quality and performance. MBB006LE contains extender, which give anti-blocking properties. CHARACTERISTICS - Easy processing - Very good dispersion - Minimal wear effect on processing equipment