A COMPOUNDED LDPE BLACK LOW MELT RESIN SPECIFICALLY DESIGNED FOR ALL PROFILE EXTRUSION APPLICATIONS.

A high flow Low Density Polyethylene Natural resin specifically designed for high speed injection molding applications.

Aceso® PEM 1870 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso® PEM 1870 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging. However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations. Application examples: coating of paper, paperboard, aluminium.

Aceso® PEM 2408 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the blown film, injection blow molding and extrusion blow molding processes. Aceso® PEM 2408 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging like bags, pouches, blow-fill-seal applications, medical films, tubes, etc... However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations.

Aceso® PEM 2420 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the blown film, injection blow molding and extrusion blow molding processes. Aceso® PEM 2420 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging like bags, pouches, blow-fill-seal applications, medical films, tubes, etc... However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations.

Aceso® PEM 2440 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso® PEM 2440 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging. However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations. Application examples: coating of paper, paperboard, aluminium.

AGILITY™ 1001 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. Main Characteristics: - Faster processing LDPE resin - Designed for higher output rates in blends with LLDPE resins at 10-20% loading - Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1002 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. This resin includes 2,000 ppm of anti-block to minimize blocking issues. Main Characteristics: - Faster processing LDPE resin - Designed for higher output rates in blends with LLDPE resins at 10-20% loading - - Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1021 Performance LDPE is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE rich blends while maintaining optics. Main Characteristics: - Faster processing LDPE resin - Designed for higher output rates in blends with LLDPE resins at 20-30% loading - Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1022 Performance LDPE resin is a high pressure LDPE resin designed to run at faster output rates on blown film lines in LLDPE blends while maintaining optics. Main Characteristics: - Faster Processing LDPE resin - Designed for higher output rates in blends with LLDPE resin at 20-30% loading - Optimized molecular structure gives improved optics in blends with LLDPE reins Complies with: - U.S.FDA 21 CFR 177.1520 (c) 2.1 - EU No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1023 Performance LDPE is used in clarity packaging with good stiffness neat and in blends with LLDPE for industrial and food packaging applications. Main Characteristics: - High optics for sparkling packages - Good stiffness - Excellent processability Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 Consult the regulations for complete details

AGILITY™ 1200 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. It also has excellent shrink and good optics performance in blends with LLDPE resins.

AGILITY™ 1500 Performance LDPE is a high pressure LDPE resin designed specifically for high processability and good optics neat and in blends with LLDPE resins for blown or cast films. Complies with: - U.S. FDA 21 CFR 177.1520(c )2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

AGILITY™ 2000 Performance LDPE is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides high stiffness and tear resistance with exceptional bubble stability, high levels of shrink, very good toughness and optical properties. Main Characteristics: - High output rates - Very high stiffness combined with good toughness - for potential downgauging - Very high tear resistance - High puncture resistance - Very high shrink

AGILITY™ 2001 Performance LDPE Resin is a high pressure LDPE resin offering clarity combined with high shrink tension and strength. Main Characteristics: - Optimum LDPE for retail shrink packaging - Excellent combination of shrink force and sparkling optics - Toughness for demanding applications Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details

AGILITY™ AT 1604 Performance LDPE can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230°C. AGILITY™ AT 1604 Performance LDPE has been designed to have excellent bubble stability and is therefore particularly suited to large wide width blown film application such as agricultural films Applications: - Heavy duty industrial film - Agricultural Film - Shrink Films AGILITY™ AT 1604 Performance LDPE should comply with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details

AGILITY EC 7000 Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. FDA-DMF Consult the regulations for complete details.

AGILITY EC 7000 R Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY EC 7000 REN Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. DFA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7030 Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 Consult the regulations for complete details.

AGILITY™ EC 7030 R Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 R Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY™ EC 7030 REN Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 REN Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7220 Performance LDPE is a high melt strength LDPE, designed for the foam industry. This resin enables the stable production of very low density foams. It can be used both in crosslinked and non-crosslinked products. Complies with: - Europe Commission Regulation (EU) No 10/2011. - U.S. FDA 21 CFR 177.1520(c)2.1. Consult the regulations for complete details.

- AgriPlast NFLDPE 3070/40000 HM is made up of 30% cellulose fibres obtained from meadow grass and 70% low density polyethylene. - AgriPlast BW granules can be used with any injection moulding machine and processed into moulded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any colour. - Ideal ease of flow for injection moulding. - High cycle times when manufacturing complex moulded parts. - AgriPlast BW is lighter than comparable fibre-reinforced composite plastics. - Fire protection without antimony and halogen. - Recyclable and residue-free disposal when incinerated. - Processing Notes for AgriPlast NFLDPE 3070/40000 HM: sufficiently dry at 70 - 80 °C, heating zones of 200 °C decreasing to 170 °C, possible short-term peak melting temperature of 210 °C, moulding temperature of 40 - 50 °C, avoid frictional and shearing heat, make sure the tool is well ventilated.

- AgriPlast NFLDPE 5050/40000 HM is made up of 50% cellulose fibres obtained from meadow grass and 50% low density polyethylene. - AgriPlast BW granules can be used with any injection moulding machine and processed into moulded components such as spoons, consoles, machine cases, protective caps, etc. The granules can also be dyed any colour. - Ideal ease of flow for injection moulding. - High cycle times when manufacturing complex moulded parts. - AgriPlast is lighter than comparable fibre-reinforced composite plastics. - Fire protection without antimony and halogen. - Recyclable and residue-free disposal when incinerated. - Processing Notes for AgriPlast NFLDPE 5050/40000 HM: sufficiently dry at 70 - 80 °C, heating zones of 200 °C decreasing to 170 °C, possible short-term peak melting temperature of 210 °C, moulding temperature of 40 - 50 °C, avoid frictional and shearing heat, make sure the tool is well ventilated.

ALCUDIA® 1970C is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating. Very high drawdown speeds are achieved throughout the extrusion temperature range, and thin coatings are possible at low temperatures. The molecular structure of the polymer produces an excellent clear coating. It has good heat sealability and moisture barrier properties. Its melt characteristics guarantee good adhesion and low neck-in. There are no smoke or odour problems, even at high temperatures. Contains no additives. TYPICAL APPLICATIONS - Extrusion coating. - Coextruded thin film. - Injection moulding. The excellent draw down properties of ALCUDIA® 1970C allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C. This material has a very low neck-in throughout a wide range of extrusion conditions. Recommended melt temperature range for extrusion coating from 275 to 330°C. Temperature range for coextrusion depending on the processed polymers. Processing conditions should be optimised for each production line.

ALCUDIA® 1970M is a low density polyethylene grade of medium fluidity intended for those injection moulding applications in which good mechanical and good flow properties are required. Its formulation does not contain additives. TYPICAL APPLICATIONS Due to its good properties balance, ALCUDIA® 1970M is a very versatile grade and is suitable for articles of very diverse sizes: - Caps and closures. - Medium to large sized Industrial parts and components Recommended melt temperature range from 180 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2008F is a low density polyethylene grade, produced by high pressure tubular technology, suitable for blown or cast film applications. This material offers easy processability and good balance of mechanical and optical properties. It does not contain any additives. TYPICAL APPLICATIONS - General packaging film - Shrink film with high mechanical resistance. - Medium duty sacks. Recommended melt temperature range from 170 to 200°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2107F is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications. This material offers easy processability and good balance of mechanical properties. TYPICAL APPLICATIONS - Fine shrink films - Carrier-bag films - Medium duty sacks - Lamination films / Food packaging Recommended melt temperature range from 160 to 190°C. Processing conditions should be optimised for each production line.

ALCUDIA® 3235F is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications. This material offers easy processability and good balance of mechanical properties. It contains slip (erucamide) and antiblock additives. TYPICAL APPLICATIONS - Fine shrink films - Carrier-bag films - Medium duty sacks - Lamination films / Food packaging Recommended melt temperature range from 160 to 190°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2202-CN is a high molecular weight, low density polyethylene black compound which offers easy processing combined with good mechanical properties. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. The outstanding features of this grade are its excellent processability, which makes suitable product for self-soported cable, and its good environmental stress cracking resistance (ESCR).

ALCUDIA® 2202F is a low density polyethylene grade, produced by high pressure tubular technology, suitable for blown or cast film applications. This material offers easy processability and good balance of mechanical and optical properties. It does not contain any additives. TYPICAL APPLICATIONS - General packaging film. - Shrink film with high mechanical resistance - Heavy duty sacks. Recommended melt temperature range from 190 to 220°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2203F is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown or cast film applications. This material offers easy processability and good balance of mechanical properties. TYPICAL APPLICATIONS - General packaging film. - Heavy duty bags. -Shrink film with high mechanical resistance. -Construction and agricultural films Recommended melt temperature range from 170 to 220°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2203FA is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown or cast film applications. This material offers easy processability and good balance of mechanical properties. It contains antiblock additives. TYPICAL APPLICATIONS - General packaging film. - Heavy duty bags - Shrink film with high mechanical resistance. - Construction and agricultural films Recommended melt temperature range from 170 to 220°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2212FA is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications. This material offers easy processability and good balance of mechanical and optical properties. It contains antioxidant and antiblock additives. TYPICAL APPLICATIONS - Thin shrink film - Carrier-bag films - Pouches refuse sacks - General packaging film Recommended melt temperature range from 160 to 190°C. Processing conditions should be optimised for each production line.

ALCUDIA® 2212FG is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications This material offers easy processability and good balance of mechanical and optical properties. It contains slip (erucamide), antioxidant and antiblock additives. TYPICAL APPLICATIONS - Carrier-bag films - Pouches refuse sacks - General packaging film Recommended melt temperature range from 160 to 190°C. Processing conditions should be optimised for each production line.